Pass Your Cisco 300-115 Exam Easy!

Passed today with 958\1000. Dump still 100% valid. all labs was LACP with STP, AAAdot1q, HSRP, VTPv3, Ferris same as certprepare.com, nothing change expect Ip address. Thank

Passed today with 958\1000. Dump valid with 100%. All labs was Ferris, HSRP, aaadot1x, LACP with STP, VTP3. Just studied all the questions in JvD164q.vce. At a LACP and AAA you can't save the config, just make sure all things correct and click next to confirm. It saved automatically. Thanks

Still valid. Passed with 853 28 August. I think I missed the switchport access command in the AAA lab, that's why I got only 67% in security. Rest was 93% and 100% so pay attention to the commands and review everything two or three times. I don't remember since it is been a while since I did a Cisco exam, but I did not have the possibility to review the old questions, once clicked Next, you are good to go.

Labs:
Ferris, VTP3, LACP+STP, AAA

All the questions from JvD dump.

Hi Guys!

Who knows where I can download vce player, I want to open this file.

in Ferris Plastic (HSRP) hotspot,
which answer is correct B or C?

any body send me vtp version 3 question and practical for exam perp any one please, i dont understand very well, where we creat vlan and how setup the new switch

AAAdot1x Lab Sim
-----------------

dot1x system-auth-control

aaa new-model

radius-server host 172.120.39.46 key rad123
aaa authentication dot1x default group radius

interface fastethernet 0/1
switchport mode access
***User Connecting port should be accecc mode***
dot1x pae authenticator
***pae: port access entity, this is for user connecting port with the dot1x enabled switch,
tell switch port act as authenticator for this port***
dot1x port-control auto
***if a user authenticate successfully, then user allows to forward traffic through that switch port***

ip access-list standard 10
permit 172.16.30.0 0.0.0.255
exit

vlan access-map rpn 10
match ip address 10
action forward
exit

vlan access-map rpn 20
action drop
exit

vlan filter rpn vlan-list 20

copy running-config sratup config

Verify cmds:
show dot1x all summary (show authentication enabled port)
show vlan access-map

NOTE: These commands got from Nugget videos, and i don't is this configuration correct or wrong... plz submit your comments.....

dump JvD.164q still valid. I already passed with 937/1000. LABS:
- LACP with STP , Ferris, VTVv3, HSRP same with certprepare.com
- AAAdot1x: change IP:
+ server host : 172.120.40.46
+ vlan 20 : 172.120.40.0/24

plzzzzz, I need the VCE player which support this file

I want to say its valid but I did horrible on SECURITY, not sure if it ws becasue I couldnt save configs or what. It 36 questions. I will go back and look at security and go retake. good luck t u guys

who pass the exam can they send us AAA and LACP with STP configuration for exam

It is still valid. 895/1000
LABS : LACP with STP,AAA Dot1X,Ferris Plastics. ^____^

i am appear in exam date of 19, I fail the exam, I did not save
AAA and lack with stp practical, and and smal fari factory question
Was there, I jest give answer but not troubl shot, total was 36 question
So give me the tip for next exam, AAA and lacp can save and
Smol factory question like core and distribution lyre switches and
Access will troubl shoot or simple give question answer

Hi Friends:
It is still valid, Thanks god I PASSED
Dont Worry You can't save the config in the labs, But the exam takes your answers.
You could help on the labs with autocomplete commands clicking on the tab key.
LABS LACP with STP,AAA,VTPv3, Ferris Plastics.
I used:
Cisco.Actualtests.300-115.v2014-12-19.by.Galvin.158q
And
Cisco.ActualTests.300-115.v2015-07-01.by.JvD.164q
The second one JVD.164q has the new questions are very important!!!
If you use this dumps with the answer inside you will pass!! May be you dont get the score 1000/1000 but you will pass!! It may be some answer are wrong, I dont change any answer and I passed.
I think your final score will depend a lot of LACP with STP, you must complete this LAB very good.
If you do this you will pass!!!
I advice you understand the questions and the answer.

Still valid on my exam some commands were not functioning like interface range fastethernet0/3-4 it was sayng incomplete command and i failed but Thanks God. to God be the Glory CCNP.

Passed exam yesterday. Dumps valid. 36 questions and labs AAAdot1x,LACP with STP,Ferris,VTPv3.

All the best.

Still Valid...Thank God Pass

Let me ask you something guys. Do we have to enter all those commands in lab questions which has test question?

Dear guys,
Today I passed Switch 300-115 core , I’m just stay at home after distance over 250 km to VUE from here. I always take note that I still recommend me to understand thoroughly material and I done very well with 1000 score !!!!!!
Thank you so much all everything .
It’s time to continue for Tshoot exam , the end of CCNP .
Lab : AAAdot1x , LACP with STP , Ferris, VTVv3, HSRP
material’s same same JvD 164 .
Good luck guys !

I found that so many answers are in JvD.164q different from Galvin.158q.
what is the reason ?

***PASSED ***
All the ques were same frm JVD-164
labs were aaa dot1x,ferries,lacp and vtp3
In aaadot1x:-
switchport mode access
swichpor access vlan 20 were already configured,
just put
dot1x port-control auto
no shut
and in lacp here were few bugs bt overall it was ok
HOPE tht helped guyss,nw heading for Tshoot cheers!!!!!!

36 questions or 39 questions ?? Please!!!

how many questions ???

Hello. Does anyone know for sure answers to these two questions please?

1. A network engineer is installing a switch for temporary workers to connect to. The engineer does not want this eitch to participate in spanning tree however end user connectivity is still required.

A. BPDUignore
B. BPDUGuard
C. BPDUblock
D. BPDUdisable
E. BPDUfilter

I would say E. BPDUfilter, as BPDUguard will shut down the port if it sees a BPDU. Is this right?

Also this question is giving me headache:

2. When troubleshooting a network problem, a network analyzer is connected to port f0/1 of a LAN switch. Which command can prevent BPDU tansmission on this port?

A. Spanning-tree portfast bpdufilter default
B. Spanning-tree portfast bpduguard enable default
C. no spanning-tree link-type shared
D. spanning-tree bpduguard default

I think this is 'A. Spanning-tree portfast bpdufilter default'. I think this because BPDUfilter is the only that that stops port from actually sending BPDUs. BPDUguard still sends BPDU but shuts down port if it hears any back, and I don't know what the other command does.

Does this sound right?

Any help will be very welcome on these two questions.

guys can someone tell me which one is more accurate for studying Galvin or JVD?

Valid & passed 958/1000. LACP,AAA Labs + this vce. 36 Questions. You can't save the config. Pay special attention to LACP. Check your configs when you are done. Good luck

100% valid passed today with 900/1000 all the best to everyone who will be taking this exam soon.

The dump is still valid passed today 900/1000..most questions came from Jvd dump..36 questions with three simulations NAC,LACP & HSRP.

Thanks Guys.. How many questions are in this exam?
Can anyone confirm if the answers in this dump are also correct too?
Also does it contain simulations? Any drag and drop in this exam?
Thanks guys and BEST OF LUCK with your goals.

Guys kindly explain on LACP sim,how do u save your configs? Which command did u put?

Passed today.100% valid for this dump

i want to know that if ""write memory and copy run start"" is not working how can we save our lab. is this any procedure.
please tell me i have to gave exam after mid of august.

100% Valid dumps.
Passed today with this JVD.vce...
All questions and labs came from here.
LABS LACP,AAA,VTPv3, Ferris Plastics...
Thanks to JvD for this dumps and certprepare
Good Luck

Ferris is an HSRP simulation. You'll find it in Galvin last questions.

it daid there is no key to access exam... can some one help ?

Where I can find FERIS sim?

Hi! I'll be taking the exam next July 30th. Which lab is Ferris? VTP?

Passed today 26/7/2015 with 8xx JvD Valid 100%
all question from this Dump

all simulation from like 9tut
HSRP , LACP wiht stp , AAA dot1x , FERRIS

is this dump valid? any updates? somebody tell us

Passed with 853. All questions and tickets are valid in Brazil, good luck :)

is there any drag n drop questions in the exam? i cannot find any in the dumps..

Pass today 874/1000.
Still valid.

101% legit and valid. Passed the exam today here in Dubai. Galvin dump is also valid but new questions are here in this dump.

Simulations are HSRP, Ferris, AAA and LACP with STP. Study certprepare for the labs.

However, the labs (AAA and LACP) have bugs, you can't save the configuration because copy run start is not recognized. Tried even the complete command syntax and all the commands I know to save my configuration such as write memory but no luck at all. It wasted most of my time so decided to move forward.

My tip is perfect the multiple questions as you can so you have a better chance to pass.

Cheers!

Is dump still valid . Plz .

I'm worried about Cisco.Actualtests.300-115.v2014-12-19.by.Galvin.158q.vce. This dump is still valid? Anyone tell me who test the exam

hi the dump valid or no ?

thanks

Cisco.Actualtests.300-115.v2014-12-19.by.Galvin.158q.vce Editor Choice

I think that dump is dangerous
So I beleve this.

A lot of people who studyed by

Cisco.Actualtests.300-115.v2014-12-19.by.Galvin.158q.vce Editor Choice

this dump were failed so I am afraid of
in this weekend. Coz I going to take the 300-115.

Okay,, after test I will tell you guys.

Dump valid. I got 895/1000 today.

This dump is valid. I got 895/1000 today.
Good luck.

Some more info on this dump if any more have used it would be appreciated

Dump is valid. Got the exam todat with 874

Thank you. I want to do the exam in next week.