Pass Your Cisco 300-115 Exam Easy!

Get 100% Real Exam Questions, Accurate & Verified Answers By IT Experts

Fast Updates & Instant Download!

Certification Exam: 300-115 (CCNP Cisco IP Switched Networks (SWITCH v2.0))

Download Free 300-115 Exam Questions

Exam 300-115 - CCNP Cisco IP Switched Networks (SWITCH v2.0)
Size: 4.51 MB
Posted Date: Friday, December 19, 2014
# of downloads: 3
Free Download: This file is outdated. Browse other 300-115 VCE Files
Exam
300-115 - CCNP Cisco IP Switched Networks (SWITCH v2.0)
Size
4.51 MB
Posted Date
Friday, December 19, 2014
# of downloads
3
Free Download
This file is outdated. Browse other 300-115 VCE Files
Comments
* The most recent comment are at the top
Pages:  [<<]  [<]  1 2 3 4 5 6 7  [>]  [>>]
  • Ahmad
  • Kuwait
  • Sep 19, 2015

alhamdolellah i passed with 853 score.
This is my second try.
Guys if you have any doubt regarding any command's bug or error immediately report it to Cisco support then they will investigate & if your problem is true they will give you a free voucher to apply .that what happened with me I applied second time free.
I had a problem with AAAdot1x!!!
I wanted to remove vlan access-map but "no vlan access-map" command was not functioning what really confused me & collapsed my answer then I failed. Just make sure you write & save a comment about certain command & issue.

Today also I didn't get full mark I don why but the good thing i passed finally.

Layer 2 83%
Security 100
Infa services 100%

Layer 2 I'm not sure If the problem with the LACP lab or there is wrong multiple choice answers but I think I answered typical with dumps.
In LACP lab I have one doubt about native vlan, I created vlan 99 & configure it as native which is maybe wrong. I think the question is telling vlans 1, 21-23 should be tagged so vlan 1 it might should be tagged with command : "dot1q tag native " but im not sure it just came to my mind in the exam but I didn't apply it because actually I am not sure of the 2 answers.
AAAdot1x I applied same commands & I get 100%

Good luck for all. 

  • Sep 19, 2015
  • India
  • India
  • Sep 19, 2015

100% valid. Passed today

  • Sep 19, 2015
  • ibrahim
  • Saudi Arabia
  • Sep 19, 2015

can send to my last veiled dump to omda_un@hotmail.com

  • Sep 19, 2015
  • roma
  • Italy
  • Sep 18, 2015

the dump is ok, i diud the exam today with score 878

  • Sep 18, 2015
  • megaw
  • China
  • Sep 18, 2015

could any one share me the dump pls?
yilikaleshetu@gmail.com

  • Sep 18, 2015
  • hn-alamri
  • Oman
  • Sep 18, 2015

can any one send me the latest valid dump?

pls, send me by email: hnalamri777@gmail.com

  • Sep 18, 2015
  • Fernando
  • United States
  • Sep 17, 2015

Dump still Valid, the answer of the LAB LACP is not completed, please take careful

  • Sep 17, 2015
  • megaw
  • United States
  • Sep 17, 2015

pls,any one can share me valid dump.
yilikaleshetu@gmail.com

  • Sep 17, 2015
  • omanlover
  • Oman
  • Sep 16, 2015

Can Anyone provide me the link for the simulator pls.
zxhks280@gmail.com

  • Sep 16, 2015
  • omanlover
  • Oman
  • Sep 16, 2015

can any one send me the latest Dumps please
zxhks280@gmail.com

  • Sep 16, 2015
  • Amit
  • India
  • Sep 16, 2015

Can Anyone provide me the link for the simulator pls.

  • Sep 16, 2015
  • garros
  • Italy
  • Sep 15, 2015

Passed today with 937, all questions are in the Jvd 164, for the lab certprepare
Infrastructure 100%
Layer2 93%
Simulator LACP, AAA, EIGRP

  • Sep 15, 2015
  • Bibo
  • Slovakia
  • Sep 15, 2015

Hi guyz .. i'll be sitting for the second time , can any one send me the latest valid dump?? (aerayah@gmail.com)
OR can any one confirm the validity of this DUMP
CHEERS . . .

  • Sep 15, 2015
  • mami
  • Turkey
  • Sep 14, 2015

PLEASE PLEASE PLEASE
can any one send me the latest Dumps please.
muhammedgungormez@gmail.com

  • Sep 14, 2015
  • Srinivasan
  • India
  • Sep 14, 2015

Hi guys i am going to write ccnp 300-115 switching exam by next week please any one send me the latest dumps as soon as possible..... csasrinivasan@gmail.com
Thks for u in advance...

  • Sep 14, 2015
  • Altaf Sayyad
  • India
  • Sep 14, 2015

Hi Bro,

Please can any one send me valid dums on mentioned email ID as i wnat to do CCNP Switch.

Thanks
Altaf Sayyad

  • Sep 14, 2015
  • ibrahim
  • Saudi Arabia
  • Sep 14, 2015

can send to my the last damp plaza

  • Sep 14, 2015
  • AB
  • Uganda
  • Sep 14, 2015

Just came from the exam.. Was my second time but passed with 790 Al-Hamdulilah... Be careful with layer 2 technologies got 75% i don't know some how dumps are giving incorrect answers....

  • Sep 14, 2015
  • Aladdin
  • Egypt
  • Sep 13, 2015

I passed today 13-sep with score 790. The dump valid .....

  • Sep 13, 2015
  • Mohammed Alhaj
  • Saudi Arabia
  • Sep 13, 2015

I pass two days ago, Dumps is still valid.
Question only 36.
I got Lab : dot1x, and etherchannel using lacp
VTPv3 sim , LACP with STP sim

  • Sep 13, 2015
  • maen
  • Jordan
  • Sep 12, 2015

can any one send me the latest Dumps please.
maen08@gmail.com

  • Sep 12, 2015
  • Srinivasan
  • India
  • Sep 12, 2015

Hi guys i am going to write ccnp 300-115 switching exam by net week please any one send me the latest dumps as soon as possible.....
Thks for u in advance...

  • Sep 12, 2015
  • Byungho
  • South Korea
  • Sep 12, 2015

100% valid. Passed today in korea thx.

  • Sep 12, 2015
  • pop
  • Canada
  • Sep 11, 2015

what happen guys, I studied the 158 plus the 6 new questions and all questions are exit on the exam, for lacp lap I did the configuration , I removed the native vlan 98 and make the 99 as native on both trunk, the I checked both trunk on both sw are up and running. then I surprised the result is 741 how come ?? its the third time I failed, my certificate gonne to expired after 10 days any one know why ?

  • Sep 11, 2015
  • Nadeem
  • Saudi Arabia
  • Sep 11, 2015

Please help! i need VCE Player. Can anybody help me to get this
Thank you

  • Sep 11, 2015
  • CCNP_300_115
  • India
  • Sep 11, 2015

@ SUR:

Thanks for the info & wishes mate!

  • Sep 11, 2015
  • SUR
  • Venezuela
  • Sep 11, 2015

Hi CCNP_300_115 Dont Worry You can't save the config in the labs, the commands write mem or copy run star doesnt work, But the exam takes your answers. Just do all the configuration on the LABS and when you finish, just click NEXT, the exam will take your configuration automatically, WISH you success

  • Sep 11, 2015
  • CCNP_300_115
  • India
  • Sep 11, 2015

Hi Guys,

Having one doubt on labs. Please help in clarifying that. I read in the above comments that in Labs, saving does not work (neither “copy run start” nor “wr”) ; so after we are done with configurations and verifications , how do we proceed further, Just click on “Next” without saving the configs?

Please help me on this,as i have exam tomorrow

  • Sep 11, 2015
  • Bran
  • Saudi Arabia
  • Sep 09, 2015

Hi,could you please guide me where to download free and latest vce application?Thanks

  • Sep 09, 2015
  • Starocean
  • Singapore
  • Sep 09, 2015

Passed today on 09 Sept 2015 in Singapore with 874/1000. Valid dump. Please don't forget to study the new mcqs in JvD. Following are the answers of those new mcqs I chose in exam. I would't say all are correct but at least I passed by choosing these answer. Almost all new mcqs appeared in exam.
-spanning-tree portfast bpdufilter
-LACP port priority, LACP system priority, system ID, port number
-The RSPAN designated VLAN is missing the remote span command
-UDLD port is configured in aggresive mode (not really a new mcq. It appeared at no.26 of both Galvin and JvD)
-MST
-BPDUfilter
-Configure a SPAN....... g0/4 only for VLAN 3

Note : JvD question no.42 to 52 seem wrong so I suggest we better refer to Galvin for 42 to 52.

Labs : aaa dot1x, VTP, LACP and Ferris Plastics appeared for me. Total 4 labs.

aaa - radius server host 172.120.40.46
VTP - everything is same, even question sequence
LACP - int vlan 1 - 192.168.1.11, ip default-gateway 192.168.1.1
Ferris Plastics - everything is same, even question sequence

Labs from certprepare are easier to study than those in dumps. However, we should cover everything.

Good luck with your exam...

  • Sep 09, 2015
  • alihk79
  • Lebanon
  • Sep 09, 2015

passed two days ago with 958 Mark , dump is valid 100 % nut sure there is something wrong in the layer 2 questions i've got 100 % security 100 % infrastructure and 95 % layer 2, i think there is two possibilities , one question in the hsrp hotspot regarding the question about the decrement value 2 wrong possibities B or C , also there is something about LACP stp lab with manual prunning for vlan , so i dont know why we didnt get the full MARK

  • Sep 09, 2015
  • Igor
  • Brazil
  • Sep 08, 2015

The dump shows different IP address to Radius Server? It shows on question ".40.46" and shows at answer "39.46."

  • Sep 08, 2015
  • Mohammed Alhaj
  • Saudi Arabia
  • Sep 08, 2015

i have a question. in dot1x sim why we use the ip (39.46)in this command :
radius-server host 172.120.39.46 key rad123
instead of :
radius-server host 172.120.40.46 key rad123

please i need the answer ASAP
Thaanks

  • Sep 08, 2015
  • Gibbone
  • Italy
  • Sep 07, 2015

Someone send sh interface trunk or sh run config on Lacp Lab? Really the vlan 99 is the native one on swtichA as in certprepare configuration?

  • Sep 07, 2015
  • Geppino
  • Italy
  • Sep 07, 2015

Hey did someone isoleted the 6 new question in JvD file ? I noticed that some answer in Jvd are different from this file and seems wrong. If someone isolated the 6 new one please write which one are. Thank u

  • Sep 07, 2015
  • Maung Myanmar
  • Myanmar
  • Sep 05, 2015

This dump is still valid.You should do in lab step by step as in question.Can't use interface range f0/3-4 command and can't save configuration (wr,copy run start). I got 853/1000.Good Luck All

  • Sep 05, 2015
  • Larry
  • Belarus
  • Sep 04, 2015

@ TAJ: if u want free player - use vceviewer.com

  • Sep 04, 2015
  • Jamal
  • Singapore
  • Sep 03, 2015

Dumps is 90% valid, pass today with score 790/1000, passing grade 790 ^_^
Question only 36.
I got Lab : dot1x, and etherchannel using lacp

  • Sep 03, 2015
  • khurram
  • United States
  • Sep 02, 2015

Which version of vce player support this file? Thanks in advance.

  • Sep 02, 2015
  • chethan
  • India
  • Sep 02, 2015

Passed today 832
This DUMP is still 100% valid in india too
AAAdot1x,vtp,ferries,Lacp,

I did mistake in LACP Lab so pls be carefull and rest all the questions are same as in dump

  • Sep 02, 2015
  • sarosh
  • United States
  • Sep 02, 2015

hi,

how can i open this vce file? do i have to download any program?

  • Sep 02, 2015
  • ns
  • Saudi Arabia
  • Sep 01, 2015

Dumps are 100% valid.
Got 853 marks out of 1000. (790 passing marks)
Layes 2 technologies 83% (no idea what went wrong)
Infrastructure security 100%
Infrastructure services 100%
Verdit is "PASS".

Total same questions and labs as of Galvin(158q) and JvD(164q).
Dont miss the 6 new question in JvD file.
I also prepared labs from certprepare.

  • Sep 01, 2015
  • Harr
  • New Zealand
  • Sep 01, 2015

Valid dump,passed today with 874 marks, lab HSRP,LACP, VTP. AAAdot1q.

Note: There is some issue with LACP lab as Port-channel did not come up after configuring it and no shutdown on both end so please test config in packet traccer.

  • Sep 01, 2015
  • Harry
  • New Zealand
  • Sep 01, 2015

Passed Exam today with 874 marks, still valid dump, there is some problem with LACP lab as Port-Channel 1 did not come up even I have tried unshut all interfaces and Port-Channel therefore got 85% otherwise all questions are same, got lab LACP, HSRP, AAAdot1Q,VTP Thanks

  • Sep 01, 2015
  • Marcus M.
  • United States
  • Aug 31, 2015

passed today, this was my 2nd shot. The lab AAAdot 1x killed me. I have correct one (AAA) if you need it. paco25@live.com

  • Aug 31, 2015
  • Rohan
  • India
  • Aug 31, 2015

Passed exam Today....dumps r still valid..few new questions, for new questions..refer JVD dumps also..but not sure @ new questions ans...have focus on labs..to get passed...some twist in LACP-STP lab...

  • Aug 31, 2015
  • Oracle
  • United Kingdom
  • Aug 31, 2015

I passed on 28th August 2015 with 874 passing score. 100% Security services,
100% Inf services and 85% layer 2. Almost all the questions were from the dump, but with some twists in the lab. Therefore, you must not memorize the labs, please try and understand them, and you'll pass. Good luck

  • Aug 31, 2015
  • Anonimo
  • Bolivia
  • Aug 31, 2015

Not is valid complety, I have problems

  • Aug 31, 2015
  • MehmoodAHemdKhan
  • Nigeria
  • Aug 29, 2015

Yes,, this dumps are still valid. passed today. pay attention on Labs and clear concepts also.

  • Aug 29, 2015
  • Taj
  • United Arab Emirates
  • Aug 28, 2015

Hi guys, Can anybody share me latest VCE simulator file. I hv older version.
Thanks in advance

  • Aug 28, 2015
  • Anwar Budiyarto
  • Indonesia
  • Aug 28, 2015

Is dump still valid ?

  • Aug 28, 2015
  • reezinmohamed
  • Sri Lanka
  • Aug 27, 2015

AAAdot1x Lab Sim
-----------------

dot1x system-auth-control

aaa new-model

radius-server host 172.120.39.46 key rad123
aaa authentication dot1x default group radius

interface fastethernet 0/1
switchport mode access
***User Connecting port should be accecc mode***
dot1x pae authenticator
***pae: port access entity, this is for user connecting port with the dot1x enabled switch,
tell switch port act as authenticator for this port***
dot1x port-control auto
***if a user authenticate successfully, then user allows to forward traffic through that switch port***

ip access-list standard 10
permit 172.16.30.0 0.0.0.255
exit

vlan access-map rpn 10
match ip address 10
action forward
exit

vlan access-map rpn 20
action drop
exit

vlan filter rpn vlan-list 20

copy running-config sratup config

Verify cmds:
show dot1x all summary (show authentication enabled port)
show vlan access-map

NOTE: These commands got from Nugget videos, and i don't is this configuration correct or wrong... plz submit your comments.....

  • Aug 27, 2015
  • AAA_DOT1X champ
  • South Africa
  • Aug 27, 2015

Passed an Hour ago!!!!
100% Security services
100% Inf services
85% layer 2
Dump Valid HOWEVER like a man cannot live on bread alone you cannot rely on these dumps alone you have to intimately understand the concepts
BAD BAD BAD news for those who memorize the commands because some commands don't work on LABS you have to be resourceful and have some work arounds.

  • Aug 27, 2015
  • Taimoor
  • France
  • Aug 27, 2015

Passed today with 832 marks at lahore..
Becareful with lacp lab its a bit tricky.use show run as it is an important verification command..simlets were HSRP and VTPv3..

  • Aug 27, 2015
  • sameed ul hassan
  • France
  • Aug 27, 2015

Dumps are still valid I got 937 . Labs are dot1x,lacp,ferries plastic,vtp but lacp lab was very tricky be careful.

  • Aug 27, 2015
  • KhaingKhaing
  • Myanmar
  • Aug 27, 2015

Today I failed the exam 721/1000. Some new question are added.

  • Aug 27, 2015
  • Khaing Khaing Htun
  • Myanmar
  • Aug 27, 2015

Today I fail the exam 721/1000.Some new exam questions are added.

  • Aug 27, 2015
  • Mohamed Alkanzi
  • Saudi Arabia
  • Aug 26, 2015

I pass the exam just few hour ago
I get ….
85% layer 2 technologies
100% Infrastructure Security
100% Infrastructure services
all from certprepare
There is diff in HSRP Hotsopt both switches are configure in server mode so I choose the option
configure vlan in both sw1 and sw2
AAAdot1x and MLS are same
no (MLS and EIGRP) Simulator
New questions RSPAN, BPDUfilter
good luck all
now to Tshoot world >>

  • Aug 26, 2015
  • yipeee
  • United States
  • Aug 26, 2015

Good staff ! Study hard and you will pass with material. Good luck

  • Aug 26, 2015
  • Eugene
  • Russian Federation
  • Aug 26, 2015

Try vceviewer.com , it's free and opens vce files.

  • Aug 26, 2015
  • UK
  • Australia
  • Aug 26, 2015

Passed today. 100% valid dump. But some answers in dump are incorrect, and labs are missing some command lines.

  • Aug 26, 2015
  • Ali
  • Lebanon
  • Aug 26, 2015

Dear all, i have finished my ccna and ccnp route and next week i have ccnp switching exam, i did all my labs on packet tracer and GNS3 but when it comes to switching i found lot of missing commands although with GNS3 IOU switching, so i have downloaded Boson Netsim 10 and really it surprised me how much it is amazing , really it supports lot of commands, like uplinkfast, bpdu filter, stp port priority , VACL .... if you have a chance take a look on it

  • Aug 26, 2015
  • BiBo
  • Belgium
  • Aug 26, 2015

hi guuyyyyyzzz
can any one confirm if this dump is still valid or not??
coz some said it aint 100% valid
plzzzzzz rply me bak ASAP

  • Aug 26, 2015
  • clOud
  • Netherlands
  • Aug 25, 2015

@ JoeBm - Which protocols do the new labs cover?

Any sample new questions?

@ Fail - Anything specific to be aware of?

  • Aug 25, 2015
  • config
  • Croatia
  • Aug 25, 2015

@JoeBm,
are you saying that there are new questions beyond those in JVD dump, and if yes how many are of those new questions? Are new labs additional labs to existing LACP with STP,AAA,VTPv3, Ferris Plastics? What technologies are in those new Labs?

Thanks a lot!!!

  • Aug 25, 2015
  • geek
  • Belgium
  • Aug 25, 2015

i pass today, dumps is valid.
pay attention to the lab

  • Aug 25, 2015
  • unknown
  • Australia
  • Aug 25, 2015

i pass exam with 853 today
dump still valid
you have to be careful with simulation
look to me it's some errors

  • Aug 25, 2015
  • JoeBm
  • Ecuador
  • Aug 24, 2015

failed today 760/1000. There are new questions not covered in this dump. 2 new labs.

  • Aug 24, 2015
  • Fail
  • Mexico
  • Aug 24, 2015

este dump no es valido ya falle en 2 ocasiones, no se arriesguen

  • Aug 24, 2015
  • AAA_DOT1X
  • South Africa
  • Aug 24, 2015

Galvin & JVD dumps has some same Qs with different answers which one of the two has correct Ans...can some one please advise.

  • Aug 24, 2015
  • Nobody
  • Australia
  • Aug 24, 2015

is it valid in Australia ? anybody?

  • Aug 24, 2015
  • shafiq
  • United Arab Emirates
  • Aug 23, 2015

passed today 853/1000 all from this dump , thanks

  • Aug 23, 2015
  • akbar shah
  • United Arab Emirates
  • Aug 23, 2015

i give me exam on 19 but i was failed my exam.
all question from dump but i don't aaa and lacp copy running-config startup-config is not working and i left, so in last i failed my exam. can you tell me how i save aaa and lacp in exam, i preparing for next exam

  • Aug 23, 2015
  • John
  • United Kingdom
  • Aug 23, 2015

I failed the exam yesterday the questions where the same from this dump. I think it's the lacp p dump that let me down, do you have to change the new switch stp and bro modes?, and can someone please post the correct config for this lab. Thanks

  • Aug 23, 2015
  • manny
  • United States
  • Aug 22, 2015

passed today with 853

  • Aug 22, 2015
  • anonomous
  • India
  • Aug 22, 2015

this dumps is still valid you can take the exam any time but unfourtunatly i failed i got 770 all the questions were the same but i faced many problems in the both laps LACP and AAA take care guys

  • Aug 22, 2015
  • SUR
  • Venezuela
  • Aug 22, 2015

Hi Friends:
It is still valid, Thanks god I PASSED
Dont Worry You can't save the config in the labs, But the exam takes your answers.
You could help on the labs with autocomplete commands clicking on the tab key.
LABS LACP with STP,AAA,VTPv3, Ferris Plastics.
I used:
Cisco.Actualtests.300-115.v2014-12-19.by.Galvin.158q
And
Cisco.ActualTests.300-115.v2015-07-01.by.JvD.164q
The second one JVD.164q has the new questions are very important!!!
If you use this dumps with the answer inside you will pass!! May be you dont get the score 1000/1000 but you will pass!! It may be some answer are wrong, I dont change any answer and I passed.
I think your final score will depend a lot of LACP with STP, you must complete this LAB very good.
If you do this you will pass!!!
I advice you understand the questions and the answer.

  • Aug 22, 2015
  • Emmanuel
  • United States
  • Aug 22, 2015

Passed the test today, 853/1000 Dump is still valid, got 36 questions all from this dump.
nfrastructure security 100%
Infrastructure services 100%
Layer 2 technology 83%

  • Aug 22, 2015
  • Panda
  • South Africa
  • Aug 21, 2015

@alexxi - are you saying the same questions that appear on this dump are valid and made you fail the exam? Please explain.

  • Aug 21, 2015
  • alexxi
  • Bulgaria
  • Aug 21, 2015

Hi, I took the exam yesterday. All the questions were from the dump and I still failed!

  • Aug 21, 2015
  • alexxi
  • Bulgaria
  • Aug 21, 2015

Hi,

I failed yesterday with 750 from 1000. Questions were absolutely like these in the dump and I still failed.

  • Aug 21, 2015
  • Naruto
  • Costa Rica
  • Aug 20, 2015

I passed today 958/1000

Infrastructure security 100%
Infrastructure services 100%
Layer 2 technology 95%

Study with JvD 100% valid

Labs: You won’t be able to save your config with “copy run start” or “wr” so don’t worry it’s normal. I lost many time on that but got 100% without saving

AAAdot1x: This lab is very easy and it ok in the dump just the ip addreses could change.

LACP with STP: Something is wrong with this sim even if the config is ok for the etherchannel the trunk won’t work until you shut/no shut and config the int directly instead of the portchannel.

VTPv3: same as dump

HSRP Hotspot (ferris): same as dump

  • Aug 20, 2015
  • Natuto
  • Costa Rica
  • Aug 20, 2015

This dump is still valid, there are just a few questions on the JvD dump. So if you want 100% study JvD.

I passed today 958

Infrastructure security 100%
Infrastructure services 100%
Layer 2 technology 95%

  • Aug 20, 2015
  • sdj
  • Netherlands
  • Aug 20, 2015

Dump is valid, but some answers are incorrect. I failed today 20 points short with 770 of 1000.

  • Aug 20, 2015
  • Tejas
  • India
  • Aug 20, 2015

anyone given or giving exam today ?

I hope its the same dump

Tejas

  • Aug 20, 2015
  • pepo
  • Canada
  • Aug 19, 2015

please remove this dump, not valid and wrong answer

  • Aug 19, 2015
  • pepo
  • Canada
  • Aug 19, 2015

no valid today i answered everything like dump but 100% 100% and layer 2 70% I think some answer not correct

  • Aug 19, 2015
  • lovejit singh
  • Australia
  • Aug 19, 2015

Dumps still valid today, i knew all the answers, not sure why i failed. Marks 730. Infrastructure security was 67%. Layer 2 technology 70%. I suspect sim with aaa. Can someone please revise answer for it.

  • Aug 19, 2015
  • akpc
  • United Arab Emirates
  • Aug 16, 2015

valid, make sure with the simulations

  • Aug 16, 2015
  • CCNP
  • Portugal
  • Aug 14, 2015

@1urk3rkt

"Ferries" is actually a lab whith a company named "Ferries Plastics" with several questions. Look in the later questions of JvD dump.

  • Aug 14, 2015
  • Jamal
  • United Kingdom
  • Aug 14, 2015

Valid. 36 questions. LACP, aaadot1x, VTPv3 and Ferris. 5 of Harus questions. With VTPv3 neither Sw1 or Sw2 were set up as primary server.

  • Aug 14, 2015
  • conglaithanh
  • Vietnam
  • Aug 14, 2015

Dear guys,
Today I passed Switch 300-115 core , I’m just stay at home after distance over 250 km to VUE from here.I always take note that I still recommend me to understand thoroughly material and I done very well with 1000 score !!!!!!
Thank you so much all everything .
It’s time to continue for Tshoot exam , the end of CCNP .
Lab : AAAdot1x , LACP with STP , Ferris, VTVv3, HSRP
material’s same same JvD 164 .
Good luck guys !

  • Aug 14, 2015
  • moises
  • Philippines
  • Aug 14, 2015

This is still valid. Passed earlier with 958 mark. Aaa dot1x lacp vtpv3 and hsrp are included.

  • Aug 14, 2015
  • 1urk3rkt
  • Myanmar
  • Aug 14, 2015

what is ferries

  • Aug 14, 2015
  • google 112
  • Sri Lanka
  • Aug 13, 2015

For same questions answers are different in Galvin.158q and JvD.164q.
why is that

  • Aug 13, 2015
  • Ajinkya
  • India
  • Aug 13, 2015

***PASSED ***
All the ques were same frm JVD-164
labs were aaa dot1x,ferries,lacp and vtp3
In aaadot1x:-
switchport mode access
swichpor access vlan 20 were already configured,
just put
dot1x port-control auto
no shut
and in lacp here were few bugs bt overall it was ok
HOPE tht helped guyss,nw heading for Tshoot cheers!!!!!!

  • Aug 13, 2015
  • Devraj
  • India
  • Aug 11, 2015

Dumps are still valid... passed today with 996/1000 marks. Few new questions out of dump were..

(1). RSPAN has been configured on a Cisco catalyst switch ; however, traffic is not being replicated to remote switch . which type of misconfiguration is a cause ?

A. The Local Switch is overloaded with the amount of sourced traffic that must be replicated
to the remote switch
B. The RSPAN designated VLAN is missing the remote span command
C. The Local & Remote RSPAN switches are configured using different session IDs
D. The Local RSPAN switch is replicating only Rx traffic to the remote switch

Answer: B

(2). A network engineer is installing a switch for temporary workers to connect to.
The engineer does not want this switch participating in Spanning Tree with the rest of the network, however, end user connectivity is still required. Which spanning-tree feature accomplishes this?

A. BPDUignore
B. BPDUGuard
C. BPDUblock
D. BPDUdisable
E. BPDUfilter

Answer: E

(3). Which four LACP components are used to determine which hot-standby links become active after an interface failure within an EtherChannel bundle? (Choose Four)

A. LACP System Priority
B. Hot-standby link identification number
C. System ID
D. Interface Bandwodth
E. LACP port Priority
F. Port Number
G. Interface MAC address

Answer :A,C,E,F

** I just had a doubt in my mind that while making switch A as a root switch for VLAN 21,22 & 23.. is it necessary to create these L2 vlans on Switch A.. I created them however it was not in dump.

Good Luck

  • Aug 11, 2015
  • Obaid
  • Australia
  • Aug 11, 2015

Dump is 100% valid. Just cleared the exam.
Messed up something in the L2 switching part and I am guessing with the LACP lab.
Was able to ping the switch management interfaces but the port channel was not showing up on Switch B. All the interfaces in the port channel were also showing down even though the show etherchannel command showed that it was active and could see the neighboring ports and the mac address of the neighboring switch.
100% Infrastructure
100% Security
78% Layer 2 technologies :(

  • Aug 11, 2015
  • Jamal
  • United Kingdom
  • Aug 10, 2015

Hello. Does anyone know for sure answers to these two questions please?

1. A network engineer is installing a switch for temporary workers to connect to. The engineer does not want this switch to participate in spanning tree however end user connectivity is still required.

A. BPDUignore
B. BPDUGuard
C. BPDUblock
D. BPDUdisable
E. BPDUfilter

I would say E. BPDUfilter, as BPDUguard will shut down the port if it sees a BPDU. Is this right?

Also this question is giving me headache:

2. When troubleshooting a network problem, a network analyzer is connected to port f0/1 of a LAN switch. Which command can prevent BPDU tansmission on this port?

A. Spanning-tree portfast bpdufilter default
B. Spanning-tree portfast bpduguard enable default
C. no spanning-tree link-type shared
D. spanning-tree bpduguard default

I think this is 'A. Spanning-tree portfast bpdufilter default'. I think this because BPDUfilter is the only that that stops port from actually sending BPDUs. BPDUguard still sends BPDU but shuts down port if it hears any back, and I don't know what the other command does.

Does this sound right?

Any help will be very welcome on these two questions.

  • Aug 10, 2015
  • FromOman
  • Oman
  • Aug 10, 2015

any one can help how to save the configuration in exam lap ?? copy run started not working !!!

  • Aug 10, 2015
  • JBBASTOS
  • Namibia
  • Aug 10, 2015

This dump still valid...hurry uppppppppppppppppppppppp

  • Aug 10, 2015
  • EG
  • Philippines
  • Aug 09, 2015

still valid, go for the exam immediately they may change it just like the ROUTING.
labs are the same, aaa and lacp. this dump is enough to pass. good luck

  • Aug 09, 2015
  • Raaaj
  • Saudi Arabia
  • Aug 07, 2015

Can anybody tell me ,where I can refer simulation

  • Aug 07, 2015
  • Tyson
  • Malaysia
  • Aug 07, 2015

Dump still Valid , just finished and passed the test today.

  • Aug 07, 2015
  • baastow
  • Netherlands
  • Aug 06, 2015

Just passed today, vce stil 100% valid.lab was
AAdot1x, LACP, Ferris,HSRP. scored 853.
security 100%
infrastructur 100%
layer 2 83%.

good luck. and thanks to all who participated in hier.

next T-shout.

  • Aug 06, 2015
  • Tyson
  • Malaysia
  • Aug 05, 2015

I going to take this exam by this Friday ... nervous nervous

  • Aug 05, 2015
  • Mohammed
  • Saudi Arabia
  • Aug 05, 2015

just pass now with score 832 ..the dumps still valid , but there is more than 4 or 5 new and not found in dumps,
LAPS:
AAA
LACP
HSRP

  • Aug 05, 2015
  • akbar
  • United Arab Emirates
  • Aug 05, 2015

AAA dot1x,HSRP,FERIS, VTPv3, Lacp-stp any one give me the practice exam in any format, i am going to give exam

  • Aug 05, 2015
  • akbar
  • United Arab Emirates
  • Aug 05, 2015

AAA dot1x,HSRP,FERIS, VTPv3, Lacp-stp

where i found the practice lab or any one have same practice on pdf or word format
please send me, i am going to give exam. akbar_shah143@yahoo.com

  • Aug 05, 2015
  • The_Godfather
  • New Zealand
  • Aug 05, 2015

I have cleared my exam on 5-08-2015 with 8xx marks. I was expecting more than this score but pass is pass. Everything was from this dump and from Haru's comments.

I got these labs HSRP hotspot, Ferris, AAA Dot1x, LACP with STP. Be aware that labs do not save your config so don't waste your time there. Also try to master all the multiple choice questions because there is definitely something wrong with the labs otherwise I would have scored more than this. However, best of luck and try to write your exam asap as I have heard Cisco is going to update the exam questions.

  • Aug 05, 2015
  • VTP
  • South Africa
  • Aug 04, 2015

@Blasius i couldn't save but passed the exam with 900/1000 so that means no need to save as long as your configs are correct.

  • Aug 04, 2015
  • Blasius
  • South Africa
  • Aug 04, 2015

Guys, wrote last week and i failed with 750, how do i save my configuration in the labs, write, copy running-config startup-config does not work

  • Aug 04, 2015
  • kasi
  • Germany
  • Aug 04, 2015

hi.

do you need to enter commands for the multiple choice labs? or is it enough just to answer correct? and if so: how many labs are there in total, where you have no other choice but to use the cli?

thanks for your answers.
kasi

  • Aug 04, 2015
  • ccnp-recert
  • Philippines
  • Aug 04, 2015

hi guys, what do you mean by the ferraris lab? which is this one? thanks a lot.

  • Aug 04, 2015
  • Ibrahim
  • Egypt
  • Aug 03, 2015

dears Im going to take the exam after 24 H Kindly advice any new q/lab anything ??

  • Aug 03, 2015
  • Ibrahim
  • Egypt
  • Aug 03, 2015

hello dears,

any updates regarding the dump ??
im going to take the exam tomorrow Isa whats new ?

  • Aug 03, 2015
  • kasi
  • Germany
  • Aug 03, 2015

hi guys,

i've got a question: in the dump there are some "labs" with multiple choise answers. is it "enought" to knwo the correct multiple choice answer or is it needed to use the consoles for the answers? also, how many "none multiple choice" labs are in the dump alltogether?

thanks for your answers.

  • Aug 03, 2015
  • jeuwon
  • Nigeria
  • Aug 03, 2015

passed on saturday 1st august 2015 with 916...dumps are stii valid but in lacp and stp lab, you may have to remove the interface connected to the router from access to trunk using in no switchport mode access .
thanks guys..dumps still very much valid

  • Aug 03, 2015
  • Emil
  • Egypt
  • Aug 01, 2015

I Passed today 832, this dump is 100% valid and all questions from it and labs are AAA, Ferris, HSRP, VTPv3, LACP with STP

  • Aug 01, 2015
  • awan
  • Saudi Arabia
  • Aug 01, 2015

Guys Passed switch today.
.All questions came from it... dumps are valid ..lab llsp dot1x

thx examcollection & certprepare.

  • Aug 01, 2015
  • Wcorp
  • Brazil
  • Aug 01, 2015

Passed today.100% valid for this dump

  • Aug 01, 2015
  • baastow
  • Netherlands
  • Jul 31, 2015

i failed today, this dump still valid. i was confused. i made security mistake. 770. i wil do next week again. wish you als the bes guys.

baastow

  • Jul 31, 2015
  • Rabbit
  • India
  • Jul 31, 2015

Guys Passed switch today.
I don know about Galvin but i used only JvD vce...All questions came from it..It has all the new questions...Just practice it u shall pass..

  • Jul 31, 2015
  • lucky guy
  • Malaysia
  • Jul 31, 2015

Passed today.100% valid for this dump. Thank you for whoever has uploaded this dump and sharing the info here.

  • Jul 31, 2015
  • Patricio
  • Argentina
  • Jul 30, 2015

Still 100% valid in Argentina. Passed today with 853/1000
All questions from Galvin + Haru's new questions (36 in total including Labs)
AAAdot1x, LACP, Ferris, VTP v3

  • Jul 30, 2015
  • Anon
  • United Kingdom
  • Jul 30, 2015

When troubleshooting a network problem, a network analyzer is connected to port f0/1 of a LAN switch Which command can prevent BPDU transmission on this port?

A- spanning-tree portfast bpdufilter default
B- spanning-tree portfast bpduguard enable

Any idea which answer is correct? Technically they can both stop BPDU transmission on the port.

  • Jul 30, 2015
  • Patricio
  • Argentina
  • Jul 30, 2015

I'll be taking the exam (Argentina) in 4 more hs. Let you know if this is still valid in Argentina. Should be, but I'm not sure. I received confirmation from a friend in Juniper that their exam will be replaced in August end, but I don't have the same type of friend in Cisco, sadly. Let's hope for the best.

  • Jul 30, 2015
  • Fahir
  • Sri Lanka
  • Jul 30, 2015

I passed the exam yesterday. This dump is 100% valid in srilanka.
Thanks to Galvin,certprepare and whoever given comments.
I got 36 question including 4 labs.
All labs same as certprepare.
Make special attention on aaa & lacp with stp labs.
Passing score 790 only.

  • Jul 30, 2015
  • minmin
  • Myanmar
  • Jul 30, 2015

Pass Today with 832/1000 ,all question+new are
still valid

  • Jul 30, 2015
  • jeuwon
  • Nigeria
  • Jul 29, 2015

pls can anyone confirm if this dumps is stil valid

  • Jul 29, 2015
  • Pirelli
  • France
  • Jul 29, 2015

@ Patricio ... AAA dot1x and VTP. This dump has everything you need ... You'll be fine. I wouldn't wait too long as we all know Cisco started to change all the exams.

  • Jul 29, 2015
  • oussama
  • Morocco
  • Jul 28, 2015

Alhamdo lilahh
First:I want to thank all the people they share with us their exeperience

passed today 100% valid all choice qst and sim from this dump thanks examcollection and certprepare.com

  • Jul 28, 2015
  • pratik
  • India
  • Jul 28, 2015

are dumps till valid?

  • Jul 28, 2015
  • baastow
  • Netherlands
  • Jul 28, 2015

Hallo , i will be taking the exam on 31 july i have two more days to practise. any sugestions will be appreatiated.

thanks to all.

  • Jul 28, 2015
  • LL
  • Netherlands
  • Jul 28, 2015

@Burhan Did it went well?

  • Jul 28, 2015
  • baastow
  • Netherlands
  • Jul 27, 2015

for those who are looking for ferris sim, when u are using the VCE you have three selected exam.
1-layer 2 technologies
2-infrastructure services
3-infrastructure security

do not think if u klick you have chosen all in one time. that is not possible. in total the questions are 158,
the ferris sim is in one of these.
i hope i helped you.
baatow

  • Jul 27, 2015
  • Patricio
  • Argentina
  • Jul 27, 2015

Hi Pirelli! I'll be taking the exam next July 30th. Could you please confirm which labs did you find in the exam? LACP, AAA dot1x, HSRP? VTP?

  • Jul 27, 2015
  • LL
  • Netherlands
  • Jul 27, 2015

@HS, i think it should be also 150 and not 100 based on the picture. Can someone confirm please?

  • Jul 27, 2015
  • Burhan
  • Netherlands
  • Jul 27, 2015

I am going tomorrow for Exam hopefully will pass the exam if the dump is still valid

  • Jul 27, 2015
  • Pirelli
  • Germany
  • Jul 27, 2015

Passed Today! 27 July 2015 ... 100% Valid ... Everyone here did a great job posting all the current questions ... We need more people posting to stay ahead of Cisco =)

  • Jul 27, 2015
  • mohamed
  • Iraq
  • Jul 25, 2015

Hi my friends is the vce exam still valid ?

  • Jul 25, 2015
  • OSSAMA
  • Saudi Arabia
  • Jul 25, 2015

Where I can find FERIS sim?

  • Jul 25, 2015
  • ahmed
  • United States
  • Jul 25, 2015

jack can you explain what is FERIS lab ?

  • Jul 25, 2015
  • Tom
  • Iraq
  • Jul 24, 2015

Hi is the exam question by Galvin still Valid?

  • Jul 24, 2015
  • jack
  • Iraq
  • Jul 24, 2015

Hi please is Dumps still valid ??!!! I will take the exam in next two days in 26/7/2015 ????? please help

thanks

(undergl from spain you can find FERIS lab AT Galvin.158q.vce Dumps above)

  • Jul 24, 2015
  • jack
  • Iraq
  • Jul 23, 2015

Hi please is Dumps still valid ??!!! I will take the exam in next two days in 26/7/2015 ????? please help

thanks

(undergl from spain you can find FERIS lab AT Galvin.158q.vce Dumps above)

  • Jul 23, 2015
  • sooooo
  • Saudi Arabia
  • Jul 23, 2015

Please tell is from where did You hear that after 1st August 2015 might will be change of the questions,because these change was already made at 15 June this year.
Please Aslan tell us with percentages that this might be true or not because the changes will be in very shorten the period of time I suppose that this change might be will after 6 months not 2 or 3.

  • Jul 23, 2015
  • Mansur
  • United Arab Emirates
  • Jul 23, 2015

100% valid dump, passed today
AAA dot1x,HSRP,FERIS, VTPv3, Lacp-stp

  • Jul 23, 2015
  • rashid
  • Georgia
  • Jul 23, 2015

where i can practice labs?

  • Jul 23, 2015
  • undergl
  • Spain
  • Jul 22, 2015

Where I can find FERIS sim?

All labs in certprepare? i don't see FERIS lab

  • Jul 22, 2015
  • MILADI Hassene
  • France
  • Jul 22, 2015

passed today, still valid 100%
AAA dot1x,HSRP,FERIS, VTPv3, Lacp-stp

  • Jul 22, 2015
  • ouss
  • Morocco
  • Jul 22, 2015

someone tell me what's Ferris Plastics?

  • Jul 22, 2015
  • COLMAN
  • Ethiopia
  • Jul 22, 2015

passed with 895 100 valid % AAA dot1x,HSRP,FERIS

  • Jul 22, 2015
  • HS
  • Belgium
  • Jul 21, 2015

Can anyone help me in this question?
What is the priority value of the VLAN 105 HSRP group on DSW2

Everywhere the answer is 100 (including galvin dumps), but it should be 150 right?

It doesn't say the interface was shut so if we look on "show standby" command, the current priority for vlan 105 is 150 and DSW2 is the active,
DSW1 is the standby with 100 of priority for vlan 105. They ask the priority of vlan 105 HSRP group on DSW2!!! so it should be 150, right?

  • Jul 21, 2015
  • james
  • Iraq
  • Jul 21, 2015

Hi is Dumps still Valid ?? i will take my exam next two days please any one help...

  • Jul 21, 2015
  • pjfh4
  • Portugal
  • Jul 20, 2015

Where can i find the most recent labs to practice?
Thanks in advance

  • Jul 20, 2015
  • George
  • United Arab Emirates
  • Jul 20, 2015

Is the lab included in this dump?
If not wr can i get it?

  • Jul 20, 2015
  • Oswaldo Leal
  • Guatemala
  • Jul 20, 2015

Is this exam still valid?

  • Jul 20, 2015
  • ahmed
  • Iraq
  • Jul 20, 2015

Hi please any one take the exam today is still Valid.........thaanks

  • Jul 20, 2015
  • velpandian
  • United States
  • Jul 20, 2015

Cleared CCNP switching 300-115, all the question from this dumps and refer haru's comment for more 6 more question. LAB LACP, AAA radius authorization, Ferris plastic, HSRP

  • Jul 20, 2015
  • jack
  • Iraq
  • Jul 19, 2015

Hi please is this Dump valid and which Lab came ?????

  • Jul 19, 2015
  • ahmed
  • Iraq
  • Jul 18, 2015

please any one take the exam in last 2 days which Labs came in the exam

thank in advance

  • Jul 18, 2015
  • Zuabair
  • United Kingdom
  • Jul 17, 2015

Passed 3 days ago - 8xx

Tips - All material is here but you need to know your commands and understand the technology, else don't waste your time attending.

Used Galvin (158) vce and used jvd.vce 164 qs

Multiple choice - same
Labs - LACP, AAA, VTPv3, Ferris Plastics

LACP - practice using Packet Tracer labs from 9tut.com

Need to check status of Switch before and after completion of Lab using commands:

Show run config, Sh interfaces Trunk,
Sh Etherchannel summary, show Vlan, Show Spanning-tree
Check using - Show ip int brief

On Switch B - Switchport mode trunk encapsulation, Also ping the DG of router

Switch A - Ping Switch B and Router

You can find out IP by sh cdp neigh detail on switchA

It is possible host could be changed so need to focus on Lab carefully, else you can input commands on wrong switch.

AAA Lab - Sh run config, ensure F0/1 is in switchport mode access and part of Vlan 20, No Shutdown

I also named the map to myname and I did add the

VLAN Access-MAP ******* 20
Action Drop
(even though there is implicit deny on ACL

I added it to the config even though didn't need to.

Sh vlan-access map

Any new Multiple Choice Qs - used jvd.vce 164 qs and answers related to switch always selected bdpu filter

Any Qs I will try to answer over the next few days as I have checked the PDF dump I have.

  • Jul 17, 2015
  • rootuser
  • Saudi Arabia
  • Jul 16, 2015

@rob ans. is A bpdufilter bec it will only ignore bpdu while bpduguard will go into errdisable

  • Jul 16, 2015
  • Miladi
  • France
  • Jul 16, 2015

Failed today. 770/1000
this exam is 100% valid.
infrastructure 100%
l2 80%
security 67%

  • Jul 16, 2015
  • Andy
  • Sweden
  • Jul 16, 2015

Dump is still valid with new questions. Pass today
Good luck all

  • Jul 16, 2015
  • 1urk3rkt
  • Myanmar
  • Jul 16, 2015

Please if anyone has the updated dumps, share it. thanks

  • Jul 16, 2015
  • sithachoang
  • Vietnam
  • Jul 16, 2015

Hi ROB , the correct answer is BPDU filter . The follow me , BPDUfilter can be configured globally or on the interface level and there’s a difference:

Global: if you enable BPDUfilter globally then any interface with portfast enabled will not send or receive any BPDUs. When you receive a BPDU on a portfast enabled interface then it will lose its portfast status, disables BPDU filtering and acts as a normal interface.
Interface: if you enable BPDUfilter on the interface it will ignore incoming BPDUs and it will not send any BPDUs. This is the equivalent of disabling spanning-tree , the mean that this switch will not participating in Spanning Tree with the rest of the network.

  • Jul 16, 2015
  • jack
  • Iraq
  • Jul 15, 2015

Hi please any one took the exam using this Dumps in last few days is it valid and which labs came

  • Jul 15, 2015
  • floyder
  • Spain
  • Jul 15, 2015

BPDUFilter is the right answer (BPDUFilter ignores STP on the interface, while BPDUGuard is a security mechanism that deactivates the interface on arrival of unexpected BPDUs).

  • Jul 15, 2015
  • Mohammed
  • United Kingdom
  • Jul 15, 2015

A network engineer is installing a switch for temporary workers to connect to. The engineer does
not want this switch participating in Spanning Tree with the rest of the network; however, end user
connectivity is still required. Which spanning-tree feature accomplishes this?
A. BPDUblock
B. BPDUfilter
C. BPDUignore
D. BPDUguard
E. BPDUdisable

Looking at the options and reading up BPDU Guard is enabled on Access ports and prevents another switch from forming a trunk on that port.
If enabled then port will go into an error disabled state hence no traffic will pass. Tested this on x2 Cisco 2950's

BPDu Filter will still allow another switch to participate and let traffic flow.

  • Jul 15, 2015
  • Off
  • Thailand
  • Jul 15, 2015

To Rob, the answer should be BPDUfilter because it still requires user's connection. If it is BPDUguard, errdisable will work and no connection.

  • Jul 15, 2015
  • Rob
  • India
  • Jul 15, 2015

A network engineer is installing a switch for temporary workers to connect to. The engineer does
not want this switch participating in Spanning Tree with the rest of the network; however, end user
connectivity is still required. Which spanning-tree feature accomplishes this?
A. BPDUblock
B. BPDUfilter
C. BPDUignore
D. BPDUguard
E. BPDUdisable

Answer differs with Ziad/Shangwani and Johnny5/Okla. So which is the correct answer? Anyone please..??

  • Jul 15, 2015
  • Ali
  • United Kingdom
  • Jul 14, 2015

Passed today.dumps valud plus haru questions.. aaa. Lacp with stp and Hrsp simulation..i got hrsp with investigation of show standby command..thanks...to all.

  • Jul 14, 2015
  • Moe
  • United States
  • Jul 14, 2015

Passed today 811 made a mistake at do1x sim
the dump still valid with new questions listed at the comment section

Thank you,

  • Jul 14, 2015
  • Mohannad
  • United States
  • Jul 14, 2015

Dump still very valid ... with the new questions listed in the comment section
just passed the test today with 811.. did a mistake with the Do1x sim

sims,
LACP
DO1X

Thank you all

  • Jul 14, 2015
  • ZZ
  • Canada
  • Jul 14, 2015

Is M got the same lab (lacp)like JJ or it was different like dump.

  • Jul 14, 2015
  • Iddy
  • United States
  • Jul 14, 2015

A- spanning-tree portfast bpdufilter default
B- spanning-tree portfast bpduguard enable
C- no spanning-tree link-type shared
D- spanning-tree bpduguard default

Answer: B NO NO NO!

NO you are wrong here. Tricky Part.

Checked in real environment switch:

spanning-tree portfast bpduguard enable –> command does not exist in GC mode BUT
spanning-tree portfast bpduguard default –> command exist

spanning-tree portfast bpduguard enable –> does not exist on interface mode BUT
spanning-tree bpduguard enable –> command exist

Carefull the CLI spanning-tree portfast bpdufilter default –>exist in GC mode

  • Jul 14, 2015
  • ZZ
  • Canada
  • Jul 14, 2015

M, did you get the same lab like dumps or you also got a different lab like JJ.

(trunk configured between switch A and router A).

  • Jul 14, 2015
  • jj
  • India
  • Jul 13, 2015

Faild 770:( lacp lab changed trunk configured between switch A and router A.with switchport access vlan 98.l2-87%,security-67%
dot1x did everything as per dump.:(
Questions are all from this dump and posted coments.

  • Jul 13, 2015
  • M
  • United Kingdom
  • Jul 13, 2015

Switch (config)# spanning-tree portfast default
% Warning: this command enable portfast by default on all intrfaces.you
should now disable portfast explicitly on switched ports leading to hubs,
switches and bridges as they may create temporary bridging loops.
Switch(config)#

When troubleshooting a network problem, a network analyzer is connected to port f0/1 of a LAN switch Which command can prevent BPDU transmission on this port?

A- spanning-tree portfast bpdufilter default
B- spanning-tree portfast bpduguard enable
C- no spanning-tree link-type shared
D- spanning-tree bpduguard default

Answer: B

He is asking about command on port not globally. Passed with 958
hsrp hotspot, aaa dot1x, lacp-stp, stp v3

  • Jul 13, 2015
  • imokenzo
  • Vietnam
  • Jul 12, 2015

I passed CCNP’s ROUTE 642-902 in 2014
Which exams I have to take to get CCNP certification?
Thank in advance.

  • Jul 12, 2015
  • Ryan
  • India
  • Jul 12, 2015

Dumps Are Pure Valid including Harus Question

  • Jul 12, 2015
  • ahmed
  • Iraq
  • Jul 11, 2015

please is still valid ???
any change >>>

thanks

  • Jul 11, 2015
  • K
  • United Kingdom
  • Jul 11, 2015

Passed yesterday. Along with the additional questions posted in the comments, the file is very accurate :-)

  • Jul 11, 2015
  • jack
  • Iraq
  • Jul 11, 2015

please is the DUMPS still Valid and if there is changes on labs

thanks

  • Jul 11, 2015
  • Mohammed
  • United Kingdom
  • Jul 11, 2015

Failed - Score 770

Infrastructure security 62% - Anyone can point me in direction of which Qs or Simulation that needed more attention.

Maybe I did not follow instructions correctly but used this vce to revise.

  • Jul 11, 2015
  • Mohammed
  • United Kingdom
  • Jul 10, 2015

Failed Yesterday (UK) - 770(failed) so close yet so far to 790

36 Questions but plenty of Sim's

I revised everything including multiple choice, simulations which I knew from memory, not sure of failure but low score was related to Infrastructure Security 67%.

Labs -
1. LACP-STP (IP was changed),
2. AAA (IP was changed but am not sure if commands were saved wr / copy run start)
3. HSRP (Ferris Plastics - 6 Qs)
4. VTP3 5/6 Qs

I would advise to make sure you are comfortable with the commands and technology, it is possible the switches did not save or I simply got them completely wrong as they were the wrong answers.


Disappointed:(

  • Jul 10, 2015
  • DANIEL
  • Mexico
  • Jul 10, 2015

about this Question:
*** QUESTION 2 ***
A network engineer is installing a switch for temporary workers to connect to.
The engineer dose not want this switch participating in Spanning Tree with the rest of the network, however, end user connectivity is still required. Which spanning-tree feature accomplishes this?
A. BPDUignore
B. BPDUGuard
C. BPDUblock
D. BPDUdisable
E. BPDUfilter
Answer: E
answer is E because it say”end user connectivity is still required” BPDUGuard will errordisable the interface on violation, but BPDUfilter only prevent the packets on violation and the interface still up.

What is your opinion?

  • Jul 10, 2015
  • OOKLA BRAZIL
  • Brazil
  • Jul 09, 2015

*** QUESTION 2 ***

A network engineer is installing a switch for temporary workers to connect to.
The engineer dose not want this switch participating in Spanning Tree with the rest of the network, however, end user connectivity is still required. Which spanning-tree feature accomplishes this?

A. BPDUignore
B. BPDUGuard
C. BPDUblock
D. BPDUdisable
E. BPDUfilter

correct is EEEEEEEE
BPDUFILTER!!!!!!!!!!!!!!!!!!!!!!

  • Jul 09, 2015
  • Johnny5
  • Puerto Rico
  • Jul 08, 2015

Does someone have the answer to this question??

A network engineer is installing a switch for temporary workers to connect to. The engineer does
not want this switch participating in Spanning Tree with the rest of the network; however, end user
connectivity is still required. Which spanning-tree feature accomplishes this?
A. BPDUblock
B. BPDUfilter
C. BPDUignore
D. BPDUguard
E. BPDUdisable

  • Jul 08, 2015
  • ziad
  • Jordan
  • Jul 08, 2015

Dumps are still valid....

hi guys i’m pass my exam with 836

here is my score card
layer 2 technology 82%
infrastructure security 100%
infrastructure service 100%

lab
1) LACP With STP (same dumb) interface range f0/3 – 4 notice the space ” – ”
It is very important to use
% check firsT

sh run
sh spanning-tree (to view the SW Root to how Vlan)
sh vtp status (to view VTP mode to SWA)
sh vlan
show ip int brief(check if Port-channel 1 has been created and make sure it is up)

% check last

sh etherchannel summary (to check if they are linked as LACP & both fas 0/3 and fas 0/4)
sh interfaces Trunk (to view po1) and (the allowed vlan list & native vlan)
sh cdp nei details (to view the gateway on R1 from swA)
show run (to check everything again).
from Sw b , ping 192.168.1.1
from Sw A , ping 192.168.1.11
dont forget to do the command “swithport trunk encapsulation dot1q” on interfaces f0/3 and f0/4 of SwitchB.

2)AAA dotx (same dumb exactly,same ip)

just verify if the port fas 0/1 is in vlan 20 and has mode access on ASW1 (show run)

3)HSRP Hotspot (exactly 6 Q)
4)VTP v3 (same but I took 1Q )

multi choice

from Cisco.Actualtests.300-115.v2014-12-19.by.Galvin.158q.vce

and

*** QUESTION 1 ***

RSPAN has been configured on a Cisco catalyst switch ; however, traffic is not being replicated to remote switch . which type of misconfiguration is a cause ?

A. The Local Switch is overloaded with the amount of sourced traffic that must be replicated
to the remote switch
B. The RSPAN designated VLAN is missing the remote span command
C. The Local & Remote RSPAN switches are configured using different session IDs
D. The Local RSPAN switch is replicating only Rx traffic to the remote switch

Answer: B

—————————————————————————————————–

*** QUESTION 2 ***

A network engineer is installing a switch for temporary workers to connect to.
The engineer dose not want this switch participating in Spanning Tree with the rest of the network, however, end user connectivity is still required. Which spanning-tree feature accomplishes this?

A. BPDUignore
B. BPDUGuard
C. BPDUblock
D. BPDUdisable
E. BPDUfilter

Answer: B

———————————————————————————————————-

*** QUESTION 3 ***

Which four LACP components are used to determine which hot-standby links become active after an interface failure within an EtherChannel bundle? (Choose Four)

A. LACP System Priority
B. Hot-standby link identification number
C. System ID
D. Interface Bandwodth
E. LACP port Priority
F. Port Number
G. Interface MAC address

Answer :A,C,E,F

——————————————————————————————————

*** QUESTION 4 ***

Sh run:
monitor session 1 source interface fastEthernet0/4 rx
monitor session 1 filter vlan 3
monitor session 1 destination interface fastEthernet0/5

What is the result of the SPAN configuration on a Cisco switch?

A. Configure SPAN session to monitor the received traffic on interface f0/4 only for VLAN 3
B. Configure SPAN session to monitor the received traffic on interface f0/5 only for VLAN 3
C. Configure SPAN session to monitor the received traffic on interface f0/5 for all VLANs
except VLAN 3
D. Configure SPAN session to monitor the received traffic on interface f0/4 for all VLANs
except VLAN 3

Answers: A

—————————————————————————————————-

*** QUESTION 5 ***

Switch (config)# spanning-tree portfast default
% Warning: this command enable portfast by default on all intrfaces.you
should now disable portfast explicitly on switched ports leading to hubs,
switches and bridges as they may create temporary bridging loops.
Switch(config)#

When troubleshooting a network problem, a network analyzer is connected to port f0/1 of a LAN switch Which command can prevent BPDU transmission on this port?

A- spanning-tree portfast bpdufilter default
B- spanning-tree portfast bpduguard enable
C- no spanning-tree link-type shared
D- spanning-tree bpduguard default

Answer: A

———————————————————————————————————

*** QUESTION 6 ***

To follow the Layer 2 switching guidelines, a network engineer decides to create a separate
spanning-tree for every group of 10 VLANs. which version of spanning tree is appopriate to
meet the company policy?

A. PVST+
B. STP
C. MST
D. RSTP
E. RPVST+

Answer: C

That is all

  • Jul 08, 2015
  • man2506
  • India
  • Jul 07, 2015

Dumps are still valid....
Practice all the labs

  • Jul 07, 2015
  • DANIEL_CCNP
  • Mexico
  • Jul 06, 2015

hi guys
I want to contribute with you and help. the new cuestions:

When troubleshooting a network problem, a network analyzer is connected to Port f0/1 of a LAN
switch. Which command can prevent BPDU transmission on this port?
A. spanning-tree portfast bpduguard enable
B. spanning-tree bpduguard default
C. spanning-tree portfast bpdufilter default
D. no spanning-tree link-type shared
Answer: C

Which four LACP components are used to determine which hot-standby links become active after
an interface failure within an EtherChannel bundle? (Choose four.)
A. LACP system priority
B. LACP port priority
C. interface MAC address
D. system ID
E. port number
F. hot-standby link identification number
G. interface bandwidth
Answer: A,B,D,E

RSPAN has been configured on a Cisco Catalyst switch; however, traffic is not being replicated to
the remote switch. Which type of misconfiguration is a cause?
A. The RSPAN designated VLAN is missing the remote span command.
B. The local and remote RSPAN switches are configured using different session IDs.
C. The local RSPAN switch is replicating only Rx traffic to the remote switch.
D. The local switch is overloaded with the amount of sourced traffic that must be replicated to the
remote switch.
Answer: A

After UDLD is implemented, a Network Administrator noticed that one port stops receiving UDLD
packets. This port continues to reestablish until after eight failed retries. The port then transitions
into the errdisable state. Which option describes what causes the port to go into the errdisable
state?
A. Normal UDLD operations that prevent traffic loops.
B. UDLD port is configured in aggressive mode.
C. UDLD is enabled globally.
D. UDLD timers are inconsistent.
Answer: B

To follow the Layer 2 switching guidelines, a network engineer decides to create a separate
spanning tree for every group of 10 VLANs. Which version of spanning tree is appropriate to meet
the company policy?
A. MST
B. PVST+
C. RSTP
D. RPVST+
E. STP
Answer: A

A network engineer is installing a switch for temporary workers to connect to. The engineer does
not want this switch participating in Spanning Tree with the rest of the network; however, end user
connectivity is still required. Which spanning-tree feature accomplishes this?
A. BPDUblock
B. BPDUfilter
C. BPDUignore
D. BPDUguard
E. BPDUdisable

What is the result of the SPAN configuration on a Cisco switch?
A. Configure a SPAN session to monitor the received traffic on interface g0/4 only for VLAN 3.
B. Configure a SPAN session to monitor the received traffic on interface g0/4 for all VLANs except
VLAN 3.
C. Configure a SPAN session to monitor the received traffic on interface g0/5 only for VLAN 3.
D. Configure a SPAN session to monitor the received traffic on interface g0/5 for all VLANs except
VLAN 3.

  • Jul 06, 2015
  • Zulfiqar Ali
  • United States
  • Jul 03, 2015

dear sir
i done my ccna in 2011 and after that i was get involve in CCNP in 12 june 2012 and here is my exam history .
1 October 2014 642-813 Implementing Cisco IP Switched Networks Pass
12 June 2012 642-902 Implementing Cisco IP Routing Pass
22 January 2011 640-802 Cisco Certified Network Associate Pass

my reaming exam is Tshoot , but know cisco retired that exam new version CCNP V2 ( Tshoot – 300-135)
basically i want finish my ccnp and get certificate from cisco.

know cisco says your ccnp-route exam is expire you have to pass two exam to get certified …

and my cisco login says your expiry date Oct 2017

sir please help me sort out this problem..

regards
Zulfiqar Ali
Cisco ID: CSCO11907820
Islamabad,

  • Jul 03, 2015
  • DJ
  • Canada
  • Jul 02, 2015

This dump is still valid. I passed this morning with an 839.
The new questions from below were included. The sims included in my exam were VTP3, HSRP, AAA, and LACP with STP.

Good luck to everyone!

  • Jul 02, 2015
  • danfire - Brazil
  • Brazil
  • Jul 02, 2015

Guys,
where i can download the labs for pratice?
thankss

  • Jul 02, 2015
  • vanhofas
  • Vietnam
  • Jul 02, 2015

I passed with 790/1000 ^^.
This dump is valid. Have 6 new questions, 5 of Haru's comment and 1 at below (LACP) of Shangwani's comment, i wrong this question, i mistake Switch MAC Add and Port Mac Address.
After check this dump, i wrong about 5 questions. I think i wrong at Haru's question, i don't know best answer.
2 Lab: LACP with STP and AAA. At LACP with STP, i don't config "default gateway", because Switch B ping successfully to Router.
2 Sim: VTPv3 and VTP2 Lab.
And HSRP Hotspot.
Good luck everyone!

  • Jul 02, 2015
  • jnet
  • Angola
  • Jul 02, 2015

I passed the exam yesterday with a reasonable score of 811. Some of the new questions came up and the old test still also good, please check Haru and Shangwani comments about the new questions, it did help, thank you.

  • Jul 02, 2015
  • AlejandroPC
  • Mexico
  • Jul 01, 2015

Passed today 958, all new questions where in the examen, VTP3 sim and Ferris, LACP has a bug, you need to add switchport mode encapsulation dot1q in the portchannel, also AAA sim.

  • Jul 01, 2015
Pages:  [<<]  [<]  1 2 3 4 5 6 7  [>]  [>>]

Add Comments

Only Registered Members Can Download VCE Files or View Training Courses

Please fill out your email address below in order to Download VCE files or view Training Courses. Registration is Free and Easy - you simply need to provide an email address.

  • Trusted By 1.2M IT Certification Candidates Every Month
  • VCE Files Simulate Real Exam Environment
  • Instant Download After Registration.
A confirmation link will be sent to this email address to verify your login.
Already Member? Click Here to Login

Log into your ExamCollection Account

Please Log In to download VCE file or view Training Course

Please provide a correct E-mail address

Please provide your Password (min. 6 characters)

Only registered Examcollection.com members can download vce files or view training courses.

Registration is free and easy - just provide your E-mail address. Click Here to Register

SPECIAL OFFER: GET 10% OFF

Pass your Exam with ExamCollection's PREMIUM files!

  • ExamCollection Certified Safe Files
  • Guaranteed to have ACTUAL Exam Questions
  • Up-to-Date Exam Study Material - Verified by Experts
  • Instant Downloads

SPECIAL OFFER: GET 10% OFF

Use Discount Code:

MIN10OFF

A confirmation link was sent to your e-mail.
Please check your mailbox for a message from support@examcollection.com and follow the directions.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |