have you tried to clear the CMOS? Try that... maybe it can solve your problem...
also, try to test other memory sticks on your mobo, just like OCZ or CORSAIR ones.
A friend of mine has DFI ULTRA-D and HYPER X UL and they are working great... I think he's using bios 310... he's told me he could go up to 270Mhz in the memo at 1T.. I'll bring a screen and let you see..
I'll try that... but, not only me, but some friends of mine have had problems with theses KHX... what a pity!!! The question is that, here, sometimes it boots, sometimes it doesn't...
P.S.: would you mind give me your msn, if you have one? You could send it through MP... I'd really like to...
The sticks are already in slots 3 and 4 (aren't they the ones far from the cpu?)... Simply I've considered these Kingston Hyper X UL don't like working at 1T.. the system doesn't boot sometimes when they're working at 2-2-2-5-1T... It misses video.. I has begun since I've instaled theses Hyper...
Hi guys!!!
I intend to upgrade for a PCI-E System. And I'd like to clarify some doubts towards that new Epox.
Different from the 9NDA+, does the 9NPA read rails +12v and +3.3v?
Does it has problems with memos working @1T? I ask that because I've noticed 9NDA+ really has problems with it...
Hi guys!!!
Well, this time I've come here because I'm really facing a problem. I've noticed that since I've installed my new memory kit, my rig has had some strange issues. Firstly, I've had problems running memtest86... I've got errors all the time with the sticks set @2-2-2-5-1T, 2.7v...
Certainly I know USDM gets its information from Bios.. but, if you pay attention to the Bios Health Status you'll notice that both the temps and the voltages are a bit higher than in USDM... Because of that I've asked about Bios and USDM.
Towards damaging my processor, indeed from now on I...
I've sent another email to Epox Support and they have already answered:
Hi,
I'm coming here again because since I've taken part of Anandtech's forum, I've read some posts of people complaining about the undervolt issue. One of the guys there has received the following answers:
Dear...
what did he mean by "because on board sensor check opint have difference,but voltage support is normal"?
here i've set it as +0.075v.. I had once sent an email to Epox support.. they've told me not to worry about undervolt if it was stable ... I mean using CPU in stock... but now my 3000+ is...
in fact, i think that Epox should construct an adapter, right-angled, so that the 2 SATA ports could be used... unfortunately, as far as I know, the ports 3 and 4, even with BIOS updates, can't be locked... what a pity!!!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.