hi guys i have a p4 1.8a philippines... my mobo is a p4s533... question is.. since there is not pci/agp lock on this board..whats the safest / highest frequency pci/agp i can go to? 35? higher? also does the pci latency setting on mobo have any effect on this? my default is on 32 i think...
was observing asus probe.. noticed that my +5v would turn red... from being 4.999 normally it would jump to as high as 6.8.. v is that something that should worry me??? vcore also rises in this case to around 4.8v.... im running my p4 1.8a on stock voltage... at 133 fsb...
mobo is asus p4s533...
thnks duvie.. will do some testing when i get home.. follow up q.. how do i tell if i need to increase cpu voltage? im currently running it on stock 1.5v .. is it true that asus overvolts? whats the safe voltage???
hi.. i currently own a p4 1.8a on an asus p4s533 generic 333ddr(samsung) ram. ... im currently running it at 133 fsb and 4:6 mem ratio.. if i increase my fsb.. to 137 fsb .. my memory will then be running at 205.5 (410 ddr? am i correct)... i get better scores..but am i running the risk of...
hi.. after installing the sis ide driver and sound driver ... my hard drive started to act really slow...then my slave drive both on primary ide .. showed the the disk was blank!!! and ready for formatting.. what should i do?? im using win xp... should i just reinstall os and hope the this...
by the way since my system is new.(no os yet installed).. should i flash bios b4 installing os? i have anohter pc.. and i can dl the flash files and store them on a floppy.. wat do u think?? ill be using win xp .. i have an extra bootable hd..
what steps should i do first? my board is a...
hi.. my hd is on my athlon comp.. im planning to use the same drive on a diff p4 comp...
the drive is partioned into 2.. 10 gig (sys) 30 (data) ...
do i have to reformat the 10 gig partition? then reinstall os??
or just insert my winxp installer to reinstall the os? the drive with the data wont...
hi.... what mobo chipset is best for 1.8a.... i have plans of overclocking .... im using kingmax ddr333... what mobos do you recommend? thanks
645dx or 845???
pentium one is socket 7 right? while amd k6-500 is supersocket 7... can a p1 133 cpu fit and work on a super socket 7... i heard some1 say this.. is this true? thanks...
where can i see these markings? "sl68Q" s on the chip itself???or the box? what other batches are good oc'ers? thanks.. 300w psu hec enough to power the 1.8a to 133 fsb?
system not yet complete... only have p4s533 mobo...parts still deciding on are... proc.(1.8a or 1.6a) + memory ( thinking about samsung ddr333 256mb or kingston ddr333 256mb (but 5ns) or just use my kingmax 333ddr 256mb... + psu will use hec 300w first...
Hi im from the Philippines.. I have 2 very good deals on both chips.. Basically in terms of dollar to peso ratio.. the diff will only be 10$ for both chips.. ex: $127 for the 1.8a w choice of stock fan or avc sunflower.. then 1.6a $117w stock retail fan only... question are both chips going...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.