Hi guys,
Yes I have a p4 3.0E prescott.
Do you guys know any programs I can run so I can test ACTUAL performance with the divider 1:1 and then 3:2 or 5:4?
Also, a cooler will allow my card to OC more? How do I check the temp of my graphics card now?
Thanks guys
Thanks for the info guys.
Isn't a 1:1 ratio supposed to result in better performance though? How do I test the actual performance boost (or possible performance downgrade) if I OC the CPU more and the ram divider becomes 3:2 or 5:4 etc.?
As for OC'ing the graphics card, the previous owner...
The memory divider would be the 400/266/etc. setting in the BIOS correct?
I have OC'ed my cpu to 220 fsb but the divider became 3:2. How do I "run a memory divider" to test? What would the test procedure be?
Thanks
Hi guys,
I was wondering how much pc4000 ram would boost my system performance?
Here are my current system specs:
3.0 E
p4p800 deluxe
pc3200 XMS corsair
bfg 6800 gt
My OC is limited to 3.15 because of the ram. If i got pc4000 ram, would I be able to go significantly higher?(does...
Hey guys,
Just wondering what ram I could use for this mobo? I currently have corsair xms pc3200 but want to upgrade ram so I can overclock with the ram ratio to fsb still being 1:1.
Can this mobo handle pc4000 or higher?
Thanks guys
Andy
I'm currently reading the manual and I'm seeing some advanced options in the BIOS that I don't understand.
CPU External Frequency(Mhz) - this is the option I upped to 210 to get the overclock
DRAM Frequency- options are 266mhz 333 mhz 400 mhz and Auto. It says it allows you to set the DDR...
Hey guys,
like the title suggests, i have a p4 3.0E and an Asus p4p800 deluxe mobo. I also have 1gb corsair xms ram pc3200. I tried overclocking this but wasn't sure if i was doing this correctly.
I went into bios to raise the fsb to 210. I then ran cpu-z and saw that it ran @ 3.15 ghz. I...
Hi guys,
I just built my first comp :)
I am currently installing new drivers etc. and just installed speedfan.
I ran the program, and the display is:
temp1 25
temp2 31
temp3 -48
temp1 125
temp2 125
temp3 0
temp 125
temp 125
local temp 40
What does this mean? I'm kind...
Hi guys,
I did some searching already, but couldn't find much.
I was just wondering if I could get a list of all the programs that I should run to comitor my computer.
ie: prime95, speedfan, cpu-z
what else?
thanks
Andy
Would it be better to run the CPU at a higher clock and not have the FSB=the ram speed? or would it be better to have a lower clock where the ratio was 1:1?
Also, I have a p4p800 deluxe mobo, and I can't find the clear cmos instructons in the manual. Is it the same thing as loading the setup...
Thanks Fern
So technically I could just make sure that my divider ratio is set to 1:1, and then I just oc my CPU. This will automatically OC my ram as well? So if I want to just OC the computer a little, I could just raise the FSB until the computer doesn't boot. Then I could Clear the CMOS...
Hi guys,
I just want to make sure I got this right, to overclock I:
1) raise FSB
2) raise ram speed to match BUS speed 1:1 optimal
3) reboot comp, go into windows to check for instability
That's it?
If problems:
1) raise vcore a by smallest increment until I reach 1.525volts...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.