I had a 2.4 ghz not overclocked with a 350 watt enermax power supply and was getting all sorts of problems. As soon as I switched over to my Fortron 530 watt power supply all my problems went away. I would much rather spend an extra $50-$75 on a better power supply than have to deal with not...
My mom has an 8100 I just upgraded. Hers used 16 bit pc800 rambuss modules. It should say on the heat spreader what they are but I ma 99% sure that they are 800Mhz. Also not sure what prices are goin on ebay but a single stick of 256 is $97 at newegg of course you have to get a pair.
My DSL line comes through my modem then to my Dlink router (DI-624) which I have 2 computers hooked to that. I have a wireless laptop connected to the network. I want to add my Xbox and another PC to the network in my living room. What I want to add is another wireless device and hook that...
All you need to do is find someone that works for Intel in Fab 20 that doesn't want there 2.4 unlocked northwood. ;) I have a pair but would not part with them.
My 2.4 E/S didn't overclock well either. I am building my second one tonight and hopefully will have better luck. I really havn't tried all that hard though. Hey Wingznut another year and we get another one. I have the advantage that my wife works there also. a p2 350, 2 xeon 400's, 2 p3 1...
I work for Intel and occasionaly they give us unlocked processors. (I actually saw one for sale here not too long ago.) It has actually caused us a lot problems with buying boards for them. Many boards just do not like the fact that they are unloack for some reason. I bought 4 boards so far...
I am running a 2.4 (multiplier of 24). Supposedly it is unlocked but my board only goes up to a max of 24 so no way of really using that feature unless I want to underclock it.
Shalmanese, I am not sure how AMD runs things but at Intel it is very important. Each factory that runs a certain process is matched to one another exactly. Intel uses a procedure called "copy exactly" that transfers the process from the fab that first makes the product. Each factories tools...
I have been overclocking my p4t533 and noticed a lot of FSB issues. Like I had running solid at 117 Mhz (I have 100 Mhz chip) I tried to go up to 118 it didn't work so I dropped back down to 117 and that wouldn't work now I had to drop all the way down to 110 and thats where it has been...
I will try reseating the memory. But generally it would at least power on without the memory seated properly. I fully agree with you on the 2 different boards with the same problems as probably being my fault, that is why I asked here first before RMAing it. I am getting some really good...
I have a nice 350 watt Enermax. I had to buy her a new one because hers didn't have the P4 auxillary connector. I am connecting both connectors and have tried both PS in both computers.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.