Recent content by AthlonAlien

A
Lian Li PC-7FN

One more question... Can the case hold 38mm fans (instead of the standard 25mm) in the front, rear, or top? -Thanks
- AthlonAlien
- Post #11
- Jun 14, 2011
- Forum: Cases & Cooling
A
Lian Li PC-7FN

I am also looking to get the PC-9F, but I have two questions. Can one or both of the front 120mm fans be swapped out for 140mm ones? If someone would be using two optical drives in the top 2 bays and a card reader in the one below that... could they still mought a single HDD without using the...
- AthlonAlien
- Post #9
- Jun 13, 2011
- Forum: Cases & Cooling
A
Samsung F3/WD Black... also quick RAID0 question

Greetings, I am looking for a new 1TB hard drive (not a SSD at this time). I have been doing a little research and came to the conclusion that the Samsung F3 and the Western Digital Black are probably the two fastest 7200 RPM drives right now. I was looking at this Samsung F3 drive on Newegg...
- AthlonAlien
- Thread
- Oct 15, 2010
- Replies: 7
- Forum: Memory and Storage
A
quick question regarding Hybrid SLI...

Are you saying it can be done... or are you saying that you don't know?
- AthlonAlien
- Post #3
- Dec 9, 2009
- Forum: CPUs and Overclocking
A
quick question regarding Hybrid SLI...

My M2N32-SLI Deluxe Wireless Edition motherboard died (it was under warranty). ASUS is sending me a M3N-HT Deluxe HDMI in place of it. On the old board I ran 2 x 8500GTs in SLI. I see that the new board supports 3-way SLI and also Hybrid SLI. My question is, can they be used together... example...
- AthlonAlien
- Thread
- Dec 9, 2009
- Replies: 3
- Forum: CPUs and Overclocking
A
Very Upsetting... Can't Get ForceWare 180.43 Installed?!?!

Check out Step #7... replacing the .inf file... it's what everyone has to do unless they have the newest cards. Yes, 8500GT SLI, lol... I traded my buddy a laptop for this current desktop. It's what he had in there. They aren't THAT bad. It's the ASUS TOP editions. They have the massive...
- AthlonAlien
- Post #4
- Nov 3, 2008
- Forum: Graphics Cards
A
Very Upsetting... Can't Get ForceWare 180.43 Installed?!?!

I cannot get these drivers to install... period?!?! I have tried... 1. Remove Old Drivers through Add/Remove Programs 2. Reboot in to Safe Mode 3. Run Driver Sweeper 1.5.5 4. Run CCleaner 2.13 5. Reboot in to Normal Mode 6. Extract drivers to archive folder 7. Replace stock .inf with...
- AthlonAlien
- Thread
- Nov 3, 2008
- Replies: 3
- Forum: Graphics Cards
A
how to access Westell 6100 from behind router?

unfortuneately, that page has nothing to do with my question :(
- AthlonAlien
- Post #16
- Sep 20, 2006
- Forum: Networking
A
how to access Westell 6100 from behind router?

Right, I have understood that all along... the problem is, I want to access the Modem (at any given time) without having to swap it back to PPPoE or plug a PC directly into it. I have done this numerous times with other Modems... this issue is specific to Westell 6100 (or similiar) and certain...
- AthlonAlien
- Post #14
- Sep 20, 2006
- Forum: Networking
A
how to access Westell 6100 from behind router?

Yes, I have tried 192.168.1.1 along with a LOT of other addresses (as I stated above). I have tried manaully changing the IP Address of the modem and router (so they wouldn't be in conflict)... that didn't help. I am a computer technician and very familiar with networking and routers. This is 1...
- AthlonAlien
- Post #12
- Sep 20, 2006
- Forum: Networking
A
how to access Westell 6100 from behind router?

Forward the IP of the modem in the router configuration? What are you talking about? I don't know the modem's IP... that is the problem here?!?! And what would I forward the modem's IP to (and why)? I don't think we are talking about the same thing here. I have never had to forward any ports...
- AthlonAlien
- Post #10
- Sep 19, 2006
- Forum: Networking
A
how to access Westell 6100 from behind router?

Jack, that's not the answer I'm looking for :) I may not "need" to access the modem... but I would still "like" to. I like to look at the event logs and speed tranfers. You are correct about hooking a PC directly to it, but I am wanting to avoid doing that everytime. bruceb, I have the...
- AthlonAlien
- Post #8
- Sep 19, 2006
- Forum: Networking
A
how to access Westell 6100 from behind router?

What do you mean when you say "Make sure the router is set to pass that ip range"? Thanks for the link :)
- AthlonAlien
- Post #5
- Sep 19, 2006
- Forum: Networking
A
how to access Westell 6100 from behind router?

Yes, the Westell is acting like a modem only now (no DHCP). I have tried to set a static IP Address for the modem (192.168.2.254), but it didn't work. I have verified I was on the 192.168.2.x subnet. I tried 192.168.2.1, 1.1, 0.1, 100.1, 2.254, 1.254, 0.254... I didn't try 0.100 (or any x.100...
- AthlonAlien
- Post #3
- Sep 19, 2006
- Forum: Networking
A
how to access Westell 6100 from behind router?

Greetings, The setup is Verizon DSL with a Westell 6100 modem/router combo acting as a modem only connected to a Linksys WRT54GS router. I am just trying to figure out how to access the modem now? A lot of cable modems will be accessible via the address of 192.168.100.1, but that isn't the...
- AthlonAlien
- Thread
- Sep 19, 2006
- Replies: 16
- Forum: Networking

RESOURCES

Top Bottom