Recent content by BioHazards

B
Just got my ATI silencer

From ArticSilvers web site. Not Electrically Conductive: Arctic Silver 5 was formulated to conduct heat, not electricity. (While much safer than electrically conductive silver and copper greases, Arctic Silver 5 should be kept away from electrical traces, pins, and leads. While it is not...
- BioHazards
- Post #9
- Jun 25, 2005
- Forum: Cases & Cooling
B
What do you think about the Watercooling setup

I'd stay with the Swiftech CPU block, it's cheaper and performs as well, if not better than the Danger Den blocks, it's just not as pretty.............;)
- BioHazards
- Post #8
- Jun 25, 2005
- Forum: Cases & Cooling
B
What do you think about the Watercooling setup

Get the new D5 pump instead, it's adjustable and silent........;)
- BioHazards
- Post #4
- Jun 25, 2005
- Forum: Cases & Cooling
B
Please recommend a 5.25 fan controller

I'll second the Sunbeam, that's the one I use.......;)
- BioHazards
- Post #8
- Jun 24, 2005
- Forum: Cases & Cooling
B
do I need a fan shroud?

You can just mount the fan, the radiator was designed that way. But you will get better temps if you use a shroud that's at least 1 inch deep............:)
- BioHazards
- Post #2
- Jun 24, 2005
- Forum: Cases & Cooling
B
TT Big typhoon question...

I have the sink on my back-up system right now (Abit AV8, A64). The cooler works very well and with the stock fan, it's almost silent. Thermaltake has a option for a VR fan that you can adjust the speed on and you get even better performance out of it. At stock settings I was getting 27c Idle...
- BioHazards
- Post #7
- Jun 24, 2005
- Forum: Cases & Cooling
B
cooler for an AMD Athlon 64 3200+ Venice

Thermaltake Big Typhoon........;) Big Tyhpoon
- BioHazards
- Post #6
- Jun 20, 2005
- Forum: Cases & Cooling
B
Lian Li PC-V1000 & water cooling

Here's a PC-V1000 that my boss did a while back, it came out pretty nice I think. Lian-Li PC-V1000
- BioHazards
- Post #9
- Jun 20, 2005
- Forum: Cases & Cooling
B
Logisys PSU

As long as you don't strat trying to push a SLi setup I think you should be fine. One other point you need to think about and that the ATX power connecter, if you're going with a PCI-e MoBo, you are more than likely need a 24 pin ATX connector and a PCI-e video card connector if it isn't...
- BioHazards
- Post #4
- Jun 15, 2005
- Forum: Cases & Cooling
B
Is there a better case than the Mountain Mod UFO?

Everyone has their thing in life............;). But I totally love my UFO. I say go for it if you like the case and don't let other folks talk you out of it because THEY don't like the looks. Just get what YOU like and the heck with the other folks...............There are a lot of cases out...
- BioHazards
- Post #5
- Jun 15, 2005
- Forum: Cases & Cooling
B
Best Watercooling System 4 F-Day? Need Advice!

Cooler Master AquaGate Mini 120 are cheap and work very well and not all that hard to install.
- BioHazards
- Post #6
- Jun 15, 2005
- Forum: Cases & Cooling
B
Custom job or pre-fab?

The new Koolance stuff works pretty well but it's also very high $$$$$$. I think you can do much better by doing it your self. But fitting it all inside your case might be a trick depending on how many drives and such you have
- BioHazards
- Post #3
- Jun 15, 2005
- Forum: Cases & Cooling
B
Logisys PSU

I reviewed one a while back, they weren't all that bad on my old XP system. But the 12v rails seem a little week (low amps) for any of the newer high end stuff.
- BioHazards
- Post #2
- Jun 15, 2005
- Forum: Cases & Cooling
B
Anyone know of any other INTERNAL liquid cooling systems?

For the money, the cooler Master AquaGate Minis rox......;)
- BioHazards
- Post #9
- Jun 12, 2005
- Forum: Cases & Cooling
B
Water cooling... pls help choose? (Poll Available)

For a starter/low end set I'd get the Cooler Master Aqua Gate Mini, I reviewed both a while back and the Aqua Gate was getting much better temps. Granted I was reviewing the Mini 80 but the Mini 120 will do much better, and for the price of a $100 bucks, you can't go wrong. But if you're totally...
- BioHazards
- Post #18
- Jun 12, 2005
- Forum: Cases & Cooling

RESOURCES

Top Bottom