Recent content by Biosmaster

B
I was wondering how successful overclocking with a P4S8X was....

No, in short.The best solution would be a IT7 as it has higher vdimm settings the BD72 will only give 2.7V which coupled with watercooling may not get your ram high enough.I would think that 3 gig is not out of the question with the latest 1.8a (Costa Rica pack dates of August are exceptional so...
- Biosmaster
- Post #8
- Sep 7, 2002
- Forum: Motherboards
B
If you had to buy a P4 motherboard for a intel P4 2.5 533 fsb, what motherboard would you recommend?

Just a small word of caution, before you jump in with the P4T533, I have been overclocking rigs for 5 years and have never in all that time used a motherboard with as many problems as this.The forums are full of issues.But if you are lucky, some peoples are working very well, but in my opinion...
- Biosmaster
- Post #5
- Sep 7, 2002
- Forum: Motherboards
B
I was wondering how successful overclocking with a P4S8X was....

Just to help you out a little, of all the currently available DDR Boards the IT7 and the BD7 were able to push my Corsair3200 further than any other board.I got 170 fsb at 3/4 setting with a 2.26b, and Sandra bandwidth of 3500/3500 so I wouldnt concern yourself with the memory issues on 845E...
- Biosmaster
- Post #6
- Sep 7, 2002
- Forum: Motherboards
B
I was wondering how successful overclocking with a P4S8X was....

The recent 1.8A chips are good to at least 2.6 most hitting 2.8, ive had three in the last week all packed in August that hit 2.82 on air,so the SIS648 is definately not the way to go, also its rumoured that SIS are already hard at work with a anew revision (remember the DX) and that Abit have...
- Biosmaster
- Post #3
- Sep 7, 2002
- Forum: Motherboards
B
**OFFICIAL** Abit BG7 (i845G) Thread

Running Corsair PC3200 Version 1.1, I hear V2.2 is using Winbond 5.0ns stuff(and sounds great). CPU 2.26B Malay at 2.82 Vcore 1.65 Memory at 166 3:4 ratio, HW strap low Cas 2 2 2 Sandra 3397 3382 Vdimm 2.7V Rock solid, the Epox 4G4A would only do DDR 390, and was a bit flaky at that even, and...
- Biosmaster
- Post #485
- Aug 16, 2002
- Forum: Motherboards
B
Calling all Epox 4G4A owners....

I have just tested three 845G boards, the Epox 4G4A is a bigger POS than most.The Abit BG7 on the other hand has me running a 2.26 on air(stockIntel Fan) at 2.8 (2.67 max on Epox even with 1.85) at 1.58v, the ddr is corsair 3200 v1.1 at DDR 436 ratio 3:4, which is rock solid and doesnt require...
- Biosmaster
- Post #6
- Aug 16, 2002
- Forum: Motherboards
B
8k7a issues: HELP!!!

You need to enable legacy usb devices in the Bios, otherwise your mouse will not get recognixed unless the dmi pool is refreshed.:frown:
- Biosmaster
- Post #2
- Jun 19, 2001
- Forum: Motherboards
B
best kt266 board comparable to the 8k7a

The only KT266 available is the MSI................ WRONG WRONG WRONG. Thers is the Soltek 75DRV and the Gigabyte 7VTX both been out at least 6 weeks. Neither of them have any problems. THE MSI BOARD DID A GREAT JOB FOR ALI & THE 760 FANS< TARNISHED THE CHIP BEFORE ANYONE ELSE RELEASED A...
- Biosmaster
- Post #3
- Jun 19, 2001
- Forum: Motherboards

RESOURCES

Top Bottom