I've got a EVGA Geforce GTX 560TI.
As far as the overclocks go, what load temps should I be mindful of?
I'm honestly used to AMD stuff so anything over 60C frightens me. :)
Ok, so I recently upgraded from a dying AM2+ system/1090T and jumped on a I7-2600k.
I've been playing around with overclocking for the last couple days and found two Prime95 Small FFT and Large FFT stable settings and curious if this is par for course.
4.5ghz @ 1.3v ('Package' temp in...
Same here, just built a mini-ITX system with the I3-2105 and H61 motherboard.
The HD3000 is more than the wife and kids needed. I was personally blown away with the horse power behind this thing. Not to mention my surprise when my son's "Lego" games (Indiana Jones, Batman, Harry Potter,etc)...
I'm running my I3-2105 on an Antec ISK-300 with the 65w PSU.
Granted I'm using the on board GPU, Mini-ITX, Crucial C300 64gb, 2.5" 500GB, and slim DVDRW drive.
Haven't had a single hiccup yet. But I don't push it to 100% all the time, from time to time with some smaller handbrake encodes...
The memory showing up at 800 should be normal, DDR is Double Data Rate so in reality it is 1600, but the clock is 800.
Same reason my DDR2 800 shows up in CPU-Z as 400.
I'm looking for a little bit of a balance, but mostly performance.
I looked at the Gentle Typhoons but couldn't find an actual rating on them for static pressure, lots of posts saying "they're great" but no rating.
That and they're a little hard to find. :)
I'm looking to change out the fan on my Antec Kuhler 620.
I've picked up the mounting hardware (screws) to mount a second fan, but having a hard time finding some good ones that are 25mm (think that is the desired fan thickness) with good static pressure.
I first looked at some Noctuas...
Are you overclocking at all?
First thing I'd try is make note of all your BIOS settings and then do the "Load Defaults".
See if it improves, if it does then slowly put your settings back to what they were and see which one causes the slow boot.
Not if you're using IDE or AHCI mode for...
I turned on machine this afternoon and got nothing but spinning fans.
I'm unsure if its the motherboard or CPU any thoughts?
I've tested the power supply with an Atom board I had laying around, posted just fine, tested the ram in the Atom board as well and no issues.
AMD 1090t
Gigabyte...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.