To begin, I put as many fans in here as I could just for the hell of it. Haha. Ill probably end up taken some out.
Next, the angle fan at the bottom that is angled it to blow the air from the AF120s intaking from the bottom and the 2 NZXT 140mm intaking from the front (not depicted) at the...
My PSU wasnt fully modular and that is a cable i didnt need. Didnt run it to the back because I didnt want to chance the back wouldnt bulge haha. Ill try to get it back there. Thanks for the comments.
I like the corsair fans. All of them are the high performance fans. The SP120s I have 4 of on the radiator for the H100. They work great. They are the loudest part of my case by far though. If you arent going to do extreme OCing the the silent edition would probably better. And aesthetically I...
The insides, just got BitFenix cable extensions.
Cable management in the back. Took about 2.5 hrs to do. Back shuts much better now. No bulge what so ever which I was very excited about.
Case is lit up with white led strips with the side with window on.
Camera picks the coloring up...
The insides, just got BitFenix cable extensions.
Cable management in the back. Took about 2.5 hrs to do. Back shuts much better now. No bulge what so ever which I was very excited about.
Case is lit up with white led strips with the side with window on.
Camera picks the coloring up odd...
Alright these Screen shots have a need for reading the headings so make sure you do that. I just tested my system with locking the cores with the affinity thing in task manager. Both without the Xtreme Stress Checked. Tested afterwards and didnt see a difference.
First is MAX in LinX at 4.5...
Thanks IDC for the pics and information. I'll get to testing when I get off work and see if my gflops will go even higher. I'll post an update in a few hours.
I have a 3770k with with a h100 with 4 fans in a push pull exhaust. I can get a stable 4.7 at 1.35 with medium or 25% LLC. When I was testing it at 4.5 I think I settled with a 1.28 with medium LLC. 4.5 is easier to keep stable with an offest voltage if u are worried about temps. Using like a...
Wasn't sure which forum to put this in. I have a Rosewill 1k watt modular psu. I was wondering if anyone new a good place to get some blue or maybe white individually sleeved cable/ extensions for my system. I saw some nzxt but all I found was black. Any suggestions would be useful. Thanks!
Yes I noticed that too. You said in an earlier post that I needed to do something in the task manager to make sure each thread was mapped to on core or something like that. I had no idea how to do that. Only idea I have is to turn off HT completely.
My original setup was as follows:
4gb in A1
8 gb in B1
4 gb in A2
8 gb in B2
When it was suggested that my RAM might be the error and I realized my OS couldnt handle more than 16 GB i went to a B1 and B2 config with an 8gb in each slot. Had many errors. System ran fine just mem test said...
Nope. Had 2 8gb sticks in originally but discovered they were bad. Then replaced with my 2 4gb sticks of the same memory and still had issues. Moved them to the slots the motherboard didnt recommend for a 2 stick configuration and boom! Gflops operating normally.
And @ Termie. I know 1.31 is...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.