cleanest would be a knockout but you would have to know a sparky or a tinbsher to borrow one.
convenient and great is a hole saw.
remember to drill yourself a small hole in the centre of the hole you plan to cut before drilling your big hole with the hole saw.
if you are a full rookie, drill a...
norton speed disk 5.1 or norton utils 2001 for NT/2K (contains speed disk).
speed disk optimises your files, not just files, but your pagefile (swapfile).... it will place your pagefile at the outer most edge of your hdd for fastest access and best performance....it does the most and does it...
well, i'm sittin here with a fax machine and a comp...and i dont know how to connect the 2 together...on the back of the fax there is what looks like a printer port...do i connect it like i would a printer?...then run a phone line from my comp to the fax and leave the fax plugged into the...
right now just win98...nope i didnt fdisk the drive.
i have 1 hard drive on ID0 partitioned into 2
C & D
then i have my cdrom and cdrw
E & F
i thought i would see my new hdd as E but it's not there.
before i knew i had it set up wrong cause it wouldnt read either drives when they were...
okay...when i boot up the adaptec scsi card posts, reads both drives: ST3102LW ID0, ST3103LW ID1.
before i couldnt get it to read ST3103LW ID1 but i played with the jumpers and got it to read both drives and boot into ST3102LW ID0 like it was before.
so i expected to see another drive letter for...
okay...when i boot up the adaptec scsi card posts, reads both drives: ST3102LW ID0, ST3103LW ID1.
before i couldnt get it to read ST3103LW ID1 but i played with the jumpers and got it to read both drives and boot into ST3102LW ID0 like it was before.
so i expected to see another drive letter for...
LOL!...okay...i finally got etr dialed in...i still dunno what it was!!...just a loose connection i guess!...anyways...rockin...thanks!....now i just gotta get both scsi drives workin!~
LOL....now i'm rippin!!...i like these drives :)
lol...thanks for the reply's.
yup...this all started when i hooked up the first scsi drive....it was all good untill i tried hooking up the 2nd scsi drive....i must have had the jumpers wrong...but i left the 1st scsi drive hooked up and all was well.
then i got hassles....try booting and it...
yup...everything was at default.
i tried different vid cards....no go.
i put my celeron 466 chip on my p3v4x (celeron 466 was never o/c'd nor did i ever have any probs with it)....no go...same thing.
so i finally got frustrated beyond belief...i took the p3v4x out and thru in my old intel...
okay, i'll try and be as brief as possible.
started out last night when i hooked up my scsi drive (cheetah ST39102LW) all was well with the drive but i couldnt get my 2nd scsi hdd (cheetah ST39103LW) to work so i just left the 1st scsi drive hooked up....so all is well and i am learning...
thanks for the reply man...
okay, where the cable goes into the card, there is (i think) a terminator (it's a black block)...then at the very end of the cable is my bootable cheetah ST3102LW U2SCSI 9.1 gig...then i tried putting the other formatted cheetah ST3103LW between the card and the...
well i'll just toss in my good ol opinion.
if i were you, i would look around here and buy from someone who frequently sells quality ram....Skorpion1Gee comes to mind...i bought 2 sticks of 128MB each (pc-133 cas2) off him and i am more than happy with the deal he gave me.
i was guaranteed to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.