Thanks for the info guys. The sound card was an Audigy 2 and after several attempts of installing and system hanging as soon as or right after I installed the drivers(various versions) I figured the card was bad so I replaced with an X-Fi Musicextreme. Same problem.
Had 4 512 sticks of memory...
Running a Gigabyte GA-K8NXP-SLI with a 3800
I have an Enermax Liberty that's reporting fluctuating -12 and -5 readings from MBM and Speedfan. And my Antec Tester reports "Fault". I installed a Antec 480 that I had in another machine and it shows the same thing. But the tester reads "Good"...
Any one else having a problem entering a product key? All of my purchased XP Pro licenses don't fit there form fills. Which say product ID and not product key
Also nothing I see on the MS site talks about "do it yourselfers" just prepurchased boxes.
Thanks Uncle Bob. The memory was something I'd thought about but nixed as the reason -and I didn't think I had any other memory to use.
You got me re-thinking.
Ok I tried a single stick of 512 DDR I had it's PNY D512mpc270pt. I assssumed this board wouldn't support a single stick since it says it can't support 3.
The memory I was using is Kingston kvr333x72c25/256 x2 sticks.
I put my single stick in and ,knock on wood, install seems to be...
The reboot is at the "setup is starting windows" stage. It never gets to any drive or partition setup questions.
My bootit disk manager can boot from do some disk stuff. -simple app though.
I've taken my 2 sticks out and swap there slots/reseated them.
Still no joy.
Any other memory test...
This seem like a common error that usually caused by conflicts. I've read every post I could find on it and on Google but I can't get it fixed.
Depending on what I have enabled and disabled and what drivers I F6 I either get lockup at "setup is starting windows" or reboot and it starts all...
Thanks for the correction. I didn't realize that.
And thanks for the quick response.
Has 24pins been the standard for awhile? My current Athlon XP system has one ATX connector and than a 4 pin connector that plugs in near the processor.
Its TruePower 380. Probably 2 small now but I'm...
I just ordered the GA-K8NXP-SLI and I'm wondering what power supply requirements -plugs and size are needed?
Will any of the newer quality models work or does the PCI-Express and SLI boards require something special?
I was looking at an Antec TruePower 430 or maybe a NeoPower?
I've seen...
My DFI LanParty went toes up so I'm looking to upgrade. But recently bought a 6600GT AGP and a stick of 512 PC2700DDR333. So I'm on the fence on spending the extra $ on to PCI-X and SLI. Especially if I have to by different memory and Power Supply????
I'm looking at 939 boards and 3000 or...
I'm looking at HP7010us or HP 7140us these are identical except for:
2.8mhz 800mhz with hyper-threading and nvidia 5200 64meg dedicated on the 7140
and 2.6 533mhz nvidia 440 64meg shared on the 7010
Is this worth $450 more?
Everything else is the same please advice
I'm thinking of starting a small business which primary income won't be retail items but I would like to sell some things.
I'm thinking of despair.com, motherboardinc.com and thinkgeek.com type things and some general interest computer books, but what would you buy?
Although I'd love to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.