infact there are sign of instability I think I change to a 533 fsb cpu the sooner the better fsb is been taken down to 133mhz even if it means lower cpu speed.
hi guys the other days I built a new computer for my wife but with a 2.6ghz 800fsb on an asus p4pe 533fsb the computer is running on a overclocked fsb from133 to 200x4=800mhz and the memory overclocked from 166 to 200 mhz with the cpu at stock speed I thought it would run very unstable so I...
on my 3.06@3220mhz with thermalright slk900 delta screamer are 41 idle and 47 full load try to get better hfs I have tried 3 and settle for this it's a great hfs it works wonders it dropped nearly 8c the other day I pushed my at 3.5ghz and temperature was 44 idle and 49 full load it cost me...
thanks soulkeeper for the compliments for my system I built it for christmas after two years savings I am thinking of getting thermalright slk 900 link I 'll be serching the forum with a good fan there is a link and tell what you'll think they do for amd as well it will be availible in the uk...
it's just looks this zalman it's not for this cpu cooling are very limited I have applied the AS3 cooling REMAIN THE SAME I have reinstall the alaska hfs I have no options left to install a thermalright slk900 with a good fan temperature wise the ASUS mobos are notorious known to report higher...
do you think that is the reason why I get a BSoD I need to up the vcore?my mobo is a asus P4PE it does have lots of features on agp/pci setting it does have a manual entry so I can put it to 66/33 and leave it is that how you lock the pci bus/??I have applied some artic silver 3 paste changed...
you are right it's part copper and majority alluminium I can't decide whether to get alpha pal or the thermalright slk900 when it will become avalible in the uk
are there any other tricks to do in the bios???for instance how to get the full potential of the corsair ram ???for locking the AGP?PCI...
I have another heatsink a zalman Pentium 4 S478 Flower Cooler CNPS6500B-ALCU I 'll mount that with ASIII and see how it goes yersterday I did push to 3384 mhz it did boot into windows as soon I was running sandra it crashed in a BSoD reput back at stock except the memory timings are set...
hi guys I am completely new to overclocking the other day I did overclock my system I'll give a brief details of my set up:
lian li case pc65
p4 3.06ghz
asus p4pe
corsair xms 3500
maya radeon 9700pro
enermax psu 431w
western digital 80 gb special edition 8 mb buffer
audigy2
cooling alaska:Akasa...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.