Ok this is where I'm at i have my i have my QX6850 running at 3.4 using the following settings... multiplier at 10 running at 1360 (340) and a 800 FSB and my vcore is at 1.375 idle at 51 and under full load goes to about 57 58 are these temps ok plus the main question i have on the striker...
Well from what i can tell you i have the same chip and I'm on water and i idle at about 41 and under full stress load at about 49 to 50. max temp rating for our chip is 65. so being at 62 to 63 is pretty high but these chips do run a bit hotter due to the 65n chip.
I'm trying to figure out what settings to use for my QX6850 and Striker Extreme board. Its stock speed is 3.0 trying to see if i can get 3.6 is this doable for this board??I'm running Win vista Ultimate 32bit Ver. i have the lastest BIO update. Anyone can offer any help on what setting to use...
Get ready everyone.
http://www.dailytech.com/Blizz...Works/article12222.htm
I know I'm ready, but so is everyone here: http://forums.anandtech.com/me...=2200076&enterthread=y
-PC Gaming Moderator
KeithTalent
Ok this is what i came up with so far. i have a Sony VAIO VGN-FZ285U/B laptop with Vista Ultimate. i used the S-vid cable and got it to work just fine threw my REC. i just used S-vid to test it out to see if it would work. Worked great my TV does not have HDMI but does have DVI. But my REC. does...
you think that's my best bet?So if i get a HDMI cable and connect 1 end to laptop and the other end to REC would this work also? Or is this not possible? Also is there any setting i need to set on my Laptop to display it on my TV I'm using windows Vista Ultimate.
Ok here the deal i have a Laptop that has HDMI and S-VID on the laptop my TV does not support HDMI, but i have a rec that all my vid and audio goes threw to my TV with HD cables. Now if i take a HDMI cable and run it threw my laptop to my REC. will this work on my TV or am i missing something...
Anyone have on them the link where it shows you how many Magazine Sub. you have left. i had this but seem to have lost the link.
Thanks
Csst
Locked-DAPUNISHER
My question is.. Not to sure if i should be concerned or not can anyone tell me that i have 2 8800 Ultra overclocked version running in SLI the temps are at 76C on 1 card and 79C on another should i be worried about these temps. keep in mind these are idle temps.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.