We did the real wood laminated ( engineered ) floating floor a couple of months ago in our kitchen & dining room. It is very easy to put down but you have to follow the directions carefully or it is easy to get into trouble. There is very little waste , maybe 3% . We have radiant heat under that...
I upgraded a brand new install of XP home to XP pro corporate on a laptop with no problems , you may have to activate your home install if you can't get it to boot . Cheers
If you want quality you can get Hospital grade outlets for $ 8 or 10 ea which you can beat with a hammer and they won't break . most people don't want to spend that much
Could anyone enlighten me as to the mysteries of X. I have an older alphaserver 400/166 that does not seem to support any PCI video cards (it has PCI slots but the cards are not recognized) so all I am left with is ISA cards. I have tried about 20 or so different ISA video cards and the result...
When my IBM 20 gb failed under warranty I just paid the upcharge to goto a 60 gb seagate. the tech guy took one look at the drive and wrote 0077 or some such code on the return slip, makes you think about how many of them that he had seen , didn't want to waste his time on the diagnostics!!
My theory is that it returns you to a similar interface to the previous OS in the case of a _nix interface all you get is a prompt in the case of NT you get a verbose prompt. When you use the set command it saves the input and the next power up it returns you to the type of OS prompt that you...
I actually got that far with the boot sequence but my knowledge of the various " set " commands is limited. I would type" boot dka4" and it would try to boot off the cd but get stuck after a few lines . and refuse further input. I'm still trying to get the hang of this.
The command I was looking for was "set os_type nt" ( there is a list if you don't get the spelling correct) . It then returns you to a more recognizable boot screen, from which I think I can proceed
Can anyone assist me. I was trying to install freebsd alpha on the above alphaserver. Chose the wrong option and ended up at the srm console. I don't know how to get back to the main bios on bootup. all I get is >>>
I'm not versed in _nix commands and can't find mucn on the compaq/dec site sto...
Yes as far as i know . They only want to get their hands on your money . A good friend of mine did exactly this wrote the A+ hardware and A+ software, minutes after registering. passed both
I found that Abit Gentus linux has the correct drivers installed for the Highpoint conroller but it is not as extensive a distro as mandrake. I prefer mandrake.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.