I know a lot of folks were not happy when there was no Drive Extender for WHS 2011. I don't want to invest more cash into the system if I don't have to. The new case should have onboard graphics so I can connect to my monitor for easier viewing. Unfortunately my KVM is a 2 USB port Belkin which...
Hi,
What I am looking for is a case that can house 4 3.5" WD HDD's, low power consumption and motherboard that will be able to run WHS v1 (else I'd go Win 8 Pro for serving media). I do ripping on my main desktop and move files over via mounting the folders from my current WHS to the desktop...
I ran memtest86 4.20 on each 4GB stick for 11-17 passes and each passed with zero errors. I am on the gigabyte forum working with a guru there. It seems I will be needing to adjust voltage settings to run all 4 at 1600 (which is ok with me). I don't plan on oc-ing the CPU, I just want to get it...
Three things to note:
1) I can't bring up system with memory in the 2 slots closest to the CPU at this point (channel A)
2) According to the manual the sticks are supposed to be installed in 3_1 and 3_3 or 3_2 and 3_4 and I decided to try that, system goes into constant reset mode (have not...
I can't get the GA-Z68X-UD3H-B3 to come up with frequency manually set to 16.0 multiplier for the memory with all 4 sticks in. I can run/boot it with 2 sticks in either of the 2 sets (2 closest to CPU or mobo edge). I ran memtest on 2 installed to mobo edge for 6 passes @ 1333 stock settings...
Yeah. I saw it bounce between 160x and 340x in CPU-z. Memory was showing as 1333 instead of 1600 and in CPU-z it was showing 667. I ran memtest on the 2 sticks overnight for 6 passes with zero errors in the 2 slots closest to mobo edge. I bumped the multiplier in memory to 16.0 and rebooted this...
Set Load optimized defaults, reset controllers to ACHI, checked memory voltage and at 1.5V and still won't come up (no beeps when it just resets so I am thinking there is a power issue somewhere *or* the mobo is faulty). Checked for BIOS update and @BIOS said there wasn't any (F9 but there is an...
I got the system up and running with 2 of the 4 Corsair Vengeance 4GB modules in either of the first 2 or second 2 slots. If I put all 4 in the system keeps resettings and never comes up. I set the frequency to 16.0 for 1600 (BIOS screen shows 1333 1600) and voltage is at 1.5v (didn't mess...
I had to replace a Thermaltake 700 or 750W PSU awhile ago for losing 5v line after a shutdown (forgot I had to do something and wouldn't turn back on after shutdown). Been running replacement for probably 3 yrs or so but rebuilding system and it is being replaced as well with a 650W PSU. Single...
I just received my Z68-UD3H-B3 from newegg along with 16Gb memory (corsair i believe), Zalman 9500 cooler and i5 2500K. What should I be looking at for cpu voltage settings (Memory is 1.5v I know already)? I don't plan on overclocking since it'll be running 24x7 pretty much and running Win7 Home...
I think I have a thermaltake....but I put the WD Green into my WHS after formatting it and the WHS arriving. Nice box but I need to turn it on before powering up the PC as it seems to hang when I power it up after the system is up. If I do the latter it is seen just fine. Otherwise it may show...
You could also consider getting a backup app (like acronis) and image your boot disk so that when you restore from failure *or* upgrading to a bigger drive things still point to the right areas on the 2nd HD. Just remember to pull power on that HDD before doing a restore so drive letters don't...
The problem I have with putting apps on a 2nd drive is that if the main boot drive dies you have to reinstall the apps anyways. So why bother? I can definitely see the use of a 2nd drive as your data storage, i.e. app installed on OS boot drive, work on data on storage drive, back up OS to one...
Alright, I did one thing I hadn't tried, roll back the driver to former version. I had done an update a week or more ago at the most recent from MS for the updates and took the realtek update. Looks like it may have gotten corrupted as now the port it back up and only one (not connected) reports...
Ok, this is really starting to tick me off. I thought there was supposed to be support for the product still? I call their RMA number and now it's saying it's disconnected/no longer in service. Yet calling Abit's California number refers you to this number for RMA's.....I am not happy at all and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.