My current rig specs are in my sig.....and at nearly 3 years old, I feel it is time to build again! I really haven't been keeping up with new hardware lately, so I am asking you guys for advice. Looking to spend about 1500 or 1700. Interested in Vista 64...but dont know if needed. It will be a...
I need 2 x 1 gig memory sticks, I am upgrading from OCZ EL Plat. rev2 2x 512. Really don't want to spend more than 250 and they must be able to OC decently. Any suggestions?
I don't know if anyone is still talking about it on the thread, but I went over to OCAU to check oput the thread that Duvie was talking about. That Chainbolt guy should be the intel poster child. Or a pretzel company poster child. His logic is certainly all twisted up like one.
what slots are your memory in? dual channel usually offers no significant performance gain ( unless using onboard video ) so that shouldn't matter, but i would keep them in slots 1 and 2. how is the overclock progressing?
go into BIOS. cell menu, then press enter on DRAM configuration.
1T/2T set to 1T
CAS# Latency set to 3
RAS# to CAS# Delay set to 4
Min RAS# Active Time set to 10
Row Precharge Time set to 4
let us know how it goes.
i agree also. but that's the ram i got, so thats what i am using. zebo did an interesting post that showed the value ram to perform every bit as well as more expensive except in winrar, i think with the a64 chips. i think if he just loosens his timings a bit he will get a good overclock. the...
here's how i have mine set up. agp set to 67. memory in slots 1 and 2. if you are using SATA use ports 3 or 4. cool and quiet disabled. memory set at 2.5-3-3-10 1T 1:1 ratio. FSB set to 250. htt multi set to 4x. vcore and vdimm at stock.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.