Recent content by dman918

D
w00t! got my hd4830 to 800MHz!

I can't seem to raise the voltage on my MSI 4830. Did the pencil mod but it seems there is no change in the amount of overclock I can do. :(
- dman918
- Post #10
- May 5, 2009
- Forum: Graphics Cards
D
Problem with Overclocking 4830

It's interesting though. I have to retract the 745/1100 and am starting from scratch. Worked just fine with ATI artifact tester, and ran Vantage no prob, but when I go into Farcry and Furmark, I get lockups. So grrr.... oh well, I'll start over with a little more juice. ;)
- dman918
- Post #30
- May 4, 2009
- Forum: Graphics Cards
D
Problem with Overclocking 4830

Thanks MrK6. So there is only the one point the pencil in?
- dman918
- Post #26
- May 3, 2009
- Forum: Graphics Cards
D
Problem with Overclocking 4830

For those interested, I got a stable 745/1100 on the card with the factory fan and voltage. Any info on the voltage mod would be appreciated. It seems that what I got is pretty consistant with what people are getting out of this nice lil card, correct?
- dman918
- Post #24
- Apr 30, 2009
- Forum: Graphics Cards
D
Problem with Overclocking 4830

Results via 3DMarkVantage (standard performance settings): Stock GPU/Mem w/E8400 @ 4GHz P 6189 GPU - 5771 CPU - 7910 FPS- 16.61, 17.21 745/1100 w/E8400 @ 4GHz P 7376 GPU 7301 CPU - 7611 FPS - 20.88, 21.92 WOW! I would say that's an overclock! Again, stock cooling and...
- dman918
- Post #23
- Apr 30, 2009
- Forum: Graphics Cards
D
Problem with Overclocking 4830

Stupid Iphone
- dman918
- Post #22
- Apr 30, 2009
- Forum: Graphics Cards
D
Problem with Overclocking 4830

Haha yeah I meant 735. Where are most people at without the volt mod? I have the msi that the link goes to. Is the volt mod a pencil mod or hard mod?
- dman918
- Post #21
- Apr 30, 2009
- Forum: Graphics Cards
D
Problem with Overclocking 4830

Mine's doing it no problem. I was actually wondering if that was low since I read about people hitting 800... I'm actually testing at 745 right now and all is well thus far, and CPU-Z confirms the temps.
- dman918
- Post #16
- Apr 30, 2009
- Forum: Graphics Cards
D
Problem with Overclocking 4830

Well, it may be Catalyst 9.4. Installed 9.5 Beta and things "seem" to be working. Currently at 935/1000 with a max temp of 62 degrees.
- dman918
- Post #13
- Apr 30, 2009
- Forum: Graphics Cards
D
Problem with Overclocking 4830

When I try to go in that menu, it says it cannot find english.ini. Also, when I try to overclock in ati tray tools and hit apply, it goes back to my default clock. I have reinstalled ati tray tools with no luck, and am using catalyst 9.4. Even took out CCC in case, and still nothing...
- dman918
- Post #12
- Apr 29, 2009
- Forum: Graphics Cards
D
Problem with Overclocking 4830

Thank you everyone. I still need to test, but I reinstalled my drivers, and installed ATI Tray Tools. I will see what happens with that. However, where is the "flash OSD"? I didn't see it in any of ATI Tray Tools' options. Thanks again!
- dman918
- Post #10
- Apr 29, 2009
- Forum: Graphics Cards
D
Problem with Overclocking 4830

OK, I checked it out, and I do have CCC installed. I thought I had the overclocking unchecked, but it was checked for overclocking. Unchecked it, restarted and it rechecks and enables itself. So I take it that CCC is conflicting with RivaTuner? If so, is that CCCs only real feature / quality...
- dman918
- Post #5
- Apr 28, 2009
- Forum: Graphics Cards
D
Problem with Overclocking 4830

OK, I am getting confused, I think. I have rivatuner to set my speeds on my 4830. Now, It seems like whatever I set it for results in no artifacting or really much change at all (FPS stay pretty consistent). I stress test with furmark and occt gpu. I've used GPU-Z and it confirms the overclock...
- dman918
- Thread
- Apr 27, 2009
- Replies: 32
- Forum: Graphics Cards
D
whats a good OC for a 4830?

Made a new thread re: my issue.
- dman918
- Post #49
- Apr 27, 2009
- Forum: Graphics Cards
D
No sound from XFi in Vista

OK, uninstalled drivers and took out the xfi. Then put it in a different pci slot and same error comes up after installing the drivers again. Grrr!!!!
- dman918
- Post #12
- Jul 14, 2007
- Forum: Computer Building

RESOURCES

Top Bottom