Recent content by EazyVG

E
Is Asus A8N-E The right selection for my computer ?

Is ASUS A8N-E good at overclcoking? I need to hit atleast 250-270Mhz ro run my 3500+ @2.6-2.7Ghz, and that preferably at 1:1 sync with my OCZ DDR500 1GB RAM. Really need any input on this. I want this board as I don't need SLI and the proce is really good on this board.
- EazyVG
- Post #12
- Oct 4, 2005
- Forum: Motherboards
E
DFI Boards

Do you think you can use 20-pin PSU on this mobo, as it has 24-pin? Somehow anandtech.com review didn't even say anything about this, and also were able to misstype quoting it has 20-pin connector. Currently I am using Thermaltake Butterfly PurePower 480W PSU.
- EazyVG
- Post #21
- Feb 2, 2005
- Forum: Motherboards
E
Which NForce3 Ultra board? EPoX or MSI?

My recommendation goes to MSI. Though Epox should be good, too. In the past I have used mainly Epox boards for my setups. The only reason I went with the MSI was the fact of early availability, plus great reviews on this board. By the way, this is first time I am using MSI board and I am...
- EazyVG
- Post #6
- Oct 20, 2004
- Forum: Motherboards
E
King S939 Motherboard

Waiting for the Epox 9NDA3+ ! This company has always produced excellent boards. Since it took them so much time to release this board, I think that they have considered most of the problems that were seen with other boards from companies released before.
- EazyVG
- Post #16
- Sep 29, 2004
- Forum: Motherboards
E
Asus A8V, Abit AV8, or MSI Neo2 ?

MSI K8N S939 or better the upcoming Epox 9NDA3+, also on nForce3 250 Ultra chipset. I will switch to Epox as soon as it reaches the stores.
- EazyVG
- Post #12
- Sep 16, 2004
- Forum: Motherboards
E
Epox 9NDA3+ Any word?

Same here. I had 8RDA3+ for my AMD XP processor. I had to get Asus board for my S939 3500+ as there were no other options a month ago. So as soon as Epox reaches the shelves, I am grabbing one for sure. Always liked Epox products. No doubt, one of the best brands and mobo maker out there.
- EazyVG
- Post #5
- Sep 10, 2004
- Forum: Motherboards
E
Epox 9NDA3+ Any word?

Has to be introduced in this month, according to a press release by Epox. I have Asus A8V and I am also waiting for this board to be shipped, so that I can jump from the current one.
- EazyVG
- Post #3
- Sep 9, 2004
- Forum: Motherboards
E
Max Overclock on Asus A8V K8T800 Pro ?

Let me be first! Asus A8V board revision: 1.02 with Serial number 46xx BIOS version: 1006 CPU @O/C: 3500+ @221x11 Memory @O/C & Timings: OCZ 2x512MB PC4000EL @ 221Mhz 2.5-3-3-8 HTT Speed: 5x Cool'n'Quite Status: Enabled Cooling: Titan TWC-A04 WaterCooling
- EazyVG
- Post #2
- Aug 27, 2004
- Forum: Motherboards
E
Max Overclock on Asus A8V K8T800 Pro ?

I recently purchased the Asus A8V Deluxe Wi-fi board with 3500+ and OCZ 2x512MB PC4000 EL Dual Channel. I got sick of waitng the nForce3 mobo. My max overclcok with the latest BIOS, 1006, was 220 x 11 in Sync with memory. Higher than that, and SATA starts to crash, litteraly. So, basically I am...
- EazyVG
- Thread
- Aug 27, 2004
- Replies: 2
- Forum: Motherboards
E
MSI K8N NEO2 Platinum Available SHORTLY!

I got tired of waiting for my Neo2 and grabbed Asus A8V rev. 1.02 (yups, not even 2.0). The board is what i expected. Not much for overclockers. I am hoping that in the coming months the nForce4 will arive and then I'll jump to that one. If the nForce4 will be delayed, then for sure i will...
- EazyVG
- Post #99
- Aug 27, 2004
- Forum: Motherboards
E
Is there a better skt 939 mobo than the MSI K8N Neo2 Platinum

I'll wait for the MSI as it will be in stock way before the Epox board, as the Epox has announced that their board will start shipping in mid-September. Once the nForce4 solution are out, I will switch back to the Epox board, as I have been using them for years. One advice I can tell is not to...
- EazyVG
- Post #4
- Aug 15, 2004
- Forum: Motherboards
E
memory for MSI K8N NEO2 Platinum

I am waiting for my MSI board. I got myself OCZ 2x512MB PC4000 EL Dual Channel. I am pretty sure that I will be able to reach high speeds, especially in sync mode. Let's see once I'll get my hands on the mobo.
- EazyVG
- Post #2
- Aug 15, 2004
- Forum: Motherboards
E
Overclocking my AMD FX53 on MSI K8N Neo2 Plat mobo...

FX series are fully unlocked CPUs, as you can increase and decrease the multipliers. MSI board will be perfect mobo for your FX53 processor. I am also waiting for the MSI board to reach me. I already have S939 3500+ processor. Regarding the memory, in case if you will have to raise voltage...
- EazyVG
- Post #3
- Aug 15, 2004
- Forum: CPUs and Overclocking
E
AMD 64 3500+ 939 with MSI NEO2, need upgrade advice

Sheriff I already have read about it on Epox site, as i check their site for product updates. I have replaced my Patriot RAM modules with OCZ EL PC4000. This RAM module will be able to handle higher speeds on nForce3 mobo at sync modes with S939. The Epox board will be available around...
- EazyVG
- Post #15
- Aug 15, 2004
- Forum: CPUs and Overclocking
E
DVD +/- R/W

Got myself Sony DWU-18A, flashed it with the ROM from Lite-on 832S and now the drive is capable of burning DL @2.4X And the drive came only for $75. I do not think that i will be using the DL recording in the coming months, as the media costs a lot. But then who knows, if your friend comes to...
- EazyVG
- Post #9
- Aug 12, 2004
- Forum: Peripherals & Components

RESOURCES

Top Bottom