i didnt have much of anything running... and even so, i thought it was supposed to average the background programs over the two cores randomly (ie. evenly)
if the cores was a minute or two apart i would chalk it up to that... but its literally going half as fast... over 2 hours one core...
so I'm testing with Prime95 using Custom 4096 test that fills my ram i put it at 3800mb.
I dont get any errors, but i notice one core has literally twice or three times as many tests completed than the other.
the 2nd core is completing a test about every minute or so, while the 1st...
what OS? 64bit i assume right?
are you getting minidumps generated when the computer crashes?? open up those minidumps if you are, it could be a driver flaking out like i had... my ATI win7 x64 drivers were causing strange intermittent lockups.
after reinstalling windows i finally got...
i had a similar problem where i had a powersupply fail on me and my OC was no longer stable.
i couldnt go much above the stock FSB without having issues, luckily the board still ran stable at stock settings so i just kept it at stock, but definitely lost its ability to OC...
alright i figure i should reply with what i beleive to be the cause of all my problems.
the horrible ATI win7 x64 drivers (specifically the Catalyst Control Center i think)... i finally used the BlueScreenViewer program to check out all the minidumps generated when my comp was crashing...
asking for help lol...
i guess i worded it wrong... the CPU is stable at 4.3 but the ram isnt... it runs prime95 SMALL FFT for 12+ hrs without problems... but if i do combined test with large fft over the ram and stuff it starts to give errors fairly quickly.
whats the max voltage for...
thats the problem... im able to run 500+mhz fsb stable alone, and cpu alone up to 4.3Ghz and ram fine at 1066... but when i start doing all of the things together im getting problems.
im pretty sure it has to do with the FSB/NB... i think when everything is running the NB might be...
okay so I have a E8400 stepping E0 with a Gigabyte GA-EP45-UD3P
I can run the chip at 4.3Ghz prime95 stable (small FFT's for 12+ hours with no errors) at 1.36v… temps under full prime load are just hitting 60C at 4.3 (on air).
I have G.skill 2x2GB 533mhz 5-5-5-15 @2.1v ram and I have...
how exactly would i go about testing the powersupply? i mean aside from checking the voltages with a multimeter. is that the only thing i can check?
bios is the latest 1.70, the board is only 10 months old, i found my receipt...
i have an E8400 which is stock @ 3.0GHz (9x multi) and...
i did forget to mention that i was running a mild overclock. i am back to running at stock settings and it seems to be fine, but it cant even do ANYTHING past stock now.
my powersupply died on me once before and now i am running the RMA replacement (its a seasonic s12 650w).
i am...
I had a rather odd thing happen to me last night. After over a year of solid stability my computer started crashing and blue screening. Eventually it just would not boot windows anymore.
The types of freezing and crashing led me to beleive it was the ram so i ran MEMTEST 86 and sure...
You won't be able to burn with them both with them on master and slave (simultaniously). Definitely have to be two seperate channels, and even that is going to be iffy because of the demand it puts on the computer.
so i figured out what it was.... i noticed the game would only start paging during some heavy scene likeeeee flying through artillery in a heli while blowing up tanks.....
so i uninstalled the 91.31 drivers and went back to the tried and true 84.56 and no more problem!!
(btw im on a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.