"Others" are wrong. I use Ubiquity APs and the handoff doesn't require any user interaction, though it's not instant. You do need to set them up using a controller, but you can use the software controller that is free. If APs are the only Ubiquity gear you have and you don't care about...
At some point you will hear distortion in the sound as you turn the volume up slowly. That is where "too high" is. Whether this first comes from the speakers or the receiver doesn't particularly matter unless you are looking to replace one, but the distortion can come from either being pushed...
Wife is still using G4600 2C/4T on an H270 board with 2x4GB DDR4 for web, media and light productivity. Money went into the NVMe SSD. It is every bit as satisfactory for her as it was when it was put together, and I agree the single-threaded performance is still really good to the point that...
I found this tutorial extremely helpful in getting file sharing up on TrueNAS:
https://www.lawrencesystems.com/truenas-core-12-user-and-group-acl-permissions-and-smb-sharing/
Microsoft will be able to purchase in a volume that custom-build can make sense for even small changes around the edges because semiconductor manufacturing capacity and specialization is at the point where customization for different clients is just a normal part the business. Expect to see...
Bad idea. You will set up an airflow-loop between the fans that will reduce overall performance. You want the overall flow in the case to be in one general flow from in to out front to back without loops. Only put a top exhaust fan behind the cooler and seal the mount in front of it. Two...
The software controller is set-and-forget (doesn't even have to be running) if you don't care about monitoring/analytics, and it will mesh multiple APs. More efficient than a hardware controller for most household users.
I had a somewhat similar problem. It seems the APs got adopted specifically to a years-older install of the Controller, and the new install could see them but not adopt them. They needed a factory reset to become adoptable like you tried, but I had to fiddle with the button a couple times to...
I would just unmount it and wash it, and keep the paint. My case is windowless tho so in practice I just ignore it, except for the air now and again to blast the chunks off.
Microparticles will get electrostatically stuck on the surface and a very thin layer will resist the gas-blast. Eventually as they build up, the color of the particles will stand out against black where it does not stand out nearly as much against metallic.
I do it all the time with my spares, works like you would expect (at least on Windows). I just use a sata 3 to usb adapter though like this because I don't use usb drives very much.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.