The refurbs are definitely the way to go if you want to mod them. I got a 1.1 box with a TSOP that's easily enabled for writing. 15 mins with a 007AUF and it it was modded and I had an install of XBMC running on it.
Cheap, and a lot easier to mod.
Thanks,
Frob
I got the Brother printer today for $69 plus tax at the Redwood City store. It was the only thing I bought. The clerk seemed proud that I was getting it at such a good price. Several stores here also had the $30 instant rebate on the item. It rang up as $179, but when the total was entered...
Is this on the Intel ICH5R controller? What BIOS rev are you running? All other reports indicate a problem with this and anything other than the original BIOS. Check out this thread at abit forums and report you configuration!
I got the adapter from ajump and it worked fine. Now if only...
Has anyone found a serial ATA adapter that works with the Intel Raid controller besides the Abit one that's so hard to get? Only one online store carries it (excaliberpc), and they don't even do will calls if you are local!
Thanks,
Frob
Why is this such a big deal? At a 100W of heat dissipation, I doubt the Prescott is going to be a good overclocker. By the time that part gets cheap to bring it into the range for the overclocking community, Intel will probably have gone to a different core rev that reduces the heat...
Hi folks. I'm about to make the leap and upgrade to an abit ic7-g or is7-g motherboard. I have two WD 120 GB drives with 8M cache that I want configure in a raid 0 mode.
I know the IC7-G comes with 1 serillel adapter, but getting a 2nd one seems to be a lot harder than the rockethead SATA...
Wow, this is a big deal. How could you tell this was happening? I thought MAM locked all the timings... Does it still only work when the ram is in 1:1 mode?
Thanks,
Frob
AntecCSR, do you have an update to what's going on with the Fusion? Has it been killed completely, or is a redesign being worked on? Any timeframe at all?
Thanks,
Frob
Gibster, what are the rev levels for each stick of the memory you have? Are they the same voltage?
Many report excellent performance with these modules.
Frob
I don't think you'll want to do RAID 0 with two different drives, even if the same the same capacity. Since they have different geometries and you're striping data cross them, you will end up with the worst case access times for each drive. At least if they are the same you don't get any worse...
Does the latest BIOS rev of the P4P800 support the setting of the temperature when Q-fan kicks the CPU fan into full speed operation? The manual says you can select the speed of the fan at cooler temps, but doesn't let you set the threshold temp like the IS7 does. But this may have gotten...
In S3 suspend-to-RAM mode, does the PCI bus also shut down? I ask because the criticool relay board (used to switch AC current to a pump for watercooling) gets it's power for the relay from the PCI bus and not the fan power. I want the watercooling system to shut down too is S3 mode, but don't...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.