Recent content by Housey

H
Should I install directx before or after my video drivers?

DirectX first, then the video card drivers.
- Housey
- Post #2
- Feb 28, 2003
- Forum: Graphics Cards
H
DO NOT BUY ABIT SR7-8X!!!!

To say that Winbond ram barely meets minimum specs is completely bs. I run my Winbond DDR400 Cas 2,5 ram @ DDR 420 Cas 2...
- Housey
- Post #9
- Aug 22, 2002
- Forum: CPUs and Overclocking
H
Asus P4b533-E - Ram Voltage Question

I'm running this with Corsair XMS 3200. Currently I'm at 150 fsb 3/4 2,6 Volt DDR 400 Cas 2. What I'm trying to acheive is running this stable at 160 fsb DDR 426, but fails after 7 hours in Memtest with 2,7 Volt. The next stepping on the Voltage in bios is 2,9 Volt, there is no 2,8 Volt option...
- Housey
- Thread
- Jul 29, 2002
- Replies: 1
- Forum: CPUs and Overclocking
H
FAQs, Monitoring Programs, Benchmarks, Bios/Drivers, & Other Apps for ALL

Bump :)
- Housey
- Post #43
- Jul 28, 2002
- Forum: CPUs and Overclocking
H
P4b533-E (i845e) - Turbo mode on ram?

Ok, I'll just leave it then. Thanks for the fast reply. ;)
- Housey
- Post #3
- Jul 28, 2002
- Forum: CPUs and Overclocking
H
P4b533-E (i845e) - Turbo mode on ram?

Got 512 mb Corsair XMS on this mobo. In the bios I can't find any setting for turbo mode (T1, T2). All I have to play with are Cas settings, Ras to Cas Delay, Ras Precharge Delay and Active Precharge Delay. Is there a setting for Turbo mode? Tips or hints are appreciated ! :)
- Housey
- Thread
- Jul 28, 2002
- Replies: 2
- Forum: CPUs and Overclocking
H
DDR433 is coming out! what do you think about this memory for overclocking?

I run my Corsair XMS 3200 at DDR 426 Cas 2. It's the rev 2.1 with Winbond chips. Have run it for 6 hours with memtest with no errors.
- Housey
- Post #16
- Jul 27, 2002
- Forum: CPUs and Overclocking
H
Asus P4b533-V - Corsair 3200XMS compatibility issues?

Here's the link I saw at the overclockers forum So it seems that others have the same experiences regardig the -V..
- Housey
- Post #11
- Jul 25, 2002
- Forum: CPUs and Overclocking
H
Asus P4b533-V - Corsair 3200XMS compatibility issues?

Sent back the -V and got me an -E. Did the 3/4 trick from one of the posts in this forum, and now I'm doing 2,55 GHz and DDR 400 Cas 2 - 3 - 3 - 6. (!) Haven't tried anything higher yet, but with DDR 400 at Cas 2 I bet it will do more. :D Seems after all it was the -V not being up for the task...
- Housey
- Post #9
- Jul 24, 2002
- Forum: CPUs and Overclocking
H
Asus P4b533-V - Corsair 3200XMS compatibility issues?

Have put the new stick in my mobo, and no joy.. Computer crashes over 150 fsb at 4:5 :| . Have tried all the ram slots, upping the voltage etc. The P4b533-V wont do DDR 400 with XMS 3200. I can only come to the conclusion that the P4b533 doesn't perform that well, atleast not with Corsair XMS...
- Housey
- Post #6
- Jul 23, 2002
- Forum: CPUs and Overclocking
H
Asus P4b533-V - Corsair 3200XMS compatibility issues?

I have gotten an apporval from my vendor to rma my ram. I'll be posting back with results when I have the new stick. I hope it's the ram failing and not the P4b533-V. Still hope this mobo doesn't have issues with Corsair ram...
- Housey
- Post #5
- Jul 23, 2002
- Forum: CPUs and Overclocking
H
Asus P4b533-V - Corsair 3200XMS compatibility issues?

The cpu runs stable at 2,7 GHz with 1,55 Volts. The Ram wont do DDR 350 regardles of what volts i feed it; Auto, 2,5, 2,6 or 2,7 Volts.. Haven't tried 2,85, cause that would void the varranty. So, any ideas of what may be causing this ? Thanks!
- Housey
- Post #3
- Jul 22, 2002
- Forum: CPUs and Overclocking
H
Asus P4b533-V - Corsair 3200XMS compatibility issues?

I have the following system: Asus P4b533-V Pentium4 2,26 GHz Corsair XMS 3200 v2.1 Right, had some airflow issues that caused the cpu to idle at ~52 C. The problem was the lack of sufficient airflow which is now fixed, idleing at 38 C. :) The problem arises now when upping the fsb in bios. At...
- Housey
- Thread
- Jul 22, 2002
- Replies: 12
- Forum: CPUs and Overclocking
H
- P4 temp problems - Solved

Ah, finally figured it out. The problem was the airflow inside the case. (Doh!) I rearranged the fans, and voila 35 - 37C idle, 42C load. :) Now back to some overclocking :D Thanks for helping out!
- Housey
- Post #11
- Jul 21, 2002
- Forum: CPUs and Overclocking
H
- P4 temp problems - Solved

I have a 80x80 Papst silent fan blowing on the Swiftech. Ambient temps are about 23 C. I have already installed the heatsink twice and applied a thin layer of AS II both times. Temps are weird... They jump up and down from 50C - 60C idle. In Asus Pc Probe, the temps look like a series of dots...
- Housey
- Post #10
- Jul 19, 2002
- Forum: CPUs and Overclocking

RESOURCES

Top Bottom