I have Enermax Whisper II 2.0 SLI 535W and eventhough I can't compare it to other PSUs I would recomend it. It is quiet (my case fans are way louder even at 50% speed, they suck but still. Actually, I have to get my ear close to it to her it.) and it has plenty of cables that are long enough to...
I don't know if you should uninstall old drivers first. For other hardware I would but in this case I didn't.
As for installation, don't let windows look for drivers, I think that if you follow what I wrote you will make it, but maybe I wrote it incorectly. Anyway it can be installed that...
UPDATE
I somehow pushed it to 253x9.5=2403.5Mhz
I tested HTT up to 330 and I didn't try more.
I new that my memory could run at 235Mhz so I wanted to know if it could get to 250Mhz or close(in case that I run HTT 300) but no way, I had to clear cmos at close to 250 regardless of V and...
I have BFG 6800gt with 71.84 driver, but I just can't think of how would video card, even a bad one, lower contrast on my monitor. If it is to send signal with 0 contrast that would be different issue but contrast is manually adjustable on monitor, so I just don't get it.
I emailed Hyundai...
I think that your problem is LTD/FSB Frequency Ratio. If I got it right that should not be on auto when ocing. In my bios I adjusted HT from 5 to 4. Basically, HTxFSB should be 1000 or less. I think that LTD = HTxFSB and in that case your LTD/FSB Ratio should be the same as mine HT setting. Open...
I got it now. I'll plug my HD to SATA #3 and try again tonight. Also, it never crossed my mind to rise chipset voltage.
And my mobo bios doesn't have LTD voltage but I hope that it will work regardless.
Now that I tried ocing, I see why ocers love DFI. I am cool with my mobo but I wish...
Driver instalation:
-put CD in
-open control panel>display>settings>advanced>monitor>properties>driver>
update driver>no, not this time>Install from a list or specific location(advanced)>don't search. I will choose the driver to install>Have Disk>Browse to L90D+ on your CD> install
That...
Thanks man. I tried to oc without going through all isolation thing but I'll have to go and try it by the quick and dirty amd oc guide.
What is LTD? and Ltd voltage?
By chipset voltage you ment North Bridge?
I am new to the whole pc build and oc thing so I am not the one that would know that. I can't remember any post that mentioned it; eventhough, I've been reading about ocing for past 2 weeks, but then maybe I just forrgot that I did. I left mine at 16/16.
Anyway, I am stuck too. You can...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.