Recent content by imported_ramu

I
Crackling sound and stops after 2 mins of the startup

Folks thanks a lot for advise and help, finally i replaced with a new PSU and the computer works like a charm.
- imported_ramu
- Post #11
- Sep 23, 2009
- Forum: Computer Building
I
Crackling sound and stops after 2 mins of the startup

Thanks Quiksilver, RebateMonger and Lemon law for your valuable suggestions, I will be buying the PSU and will retest the setup, but one thing is sure, upon repeated trials (with existing PSU), I am able to pinpoint the crackling sound to CPU, (not tools / diagnostic software, just my ear) but...
- imported_ramu
- Post #8
- Sep 21, 2009
- Forum: Computer Building
I
Crackling sound and stops after 2 mins of the startup

Thanks for the quick reply, does this mean that I now need to change the PSU and is there any way to validate that PSU is culprit ( I am assuming that your suggestion means that I now need to buy a PSU, is my assumption right)
- imported_ramu
- Post #3
- Sep 20, 2009
- Forum: Computer Building
I
Crackling sound and stops after 2 mins of the startup

With the help of some of the folks here, I made my first ever desktop about 15 months. till now things were going smooth and about 5 days back i was able to upgrade my desktop with a new graphics card too. today morning there was a crackling sound and the computer died. did the following...
- imported_ramu
- Thread
- Sep 20, 2009
- Replies: 10
- Forum: Computer Building
I
new desktop assembly

thanks for your suggestions folks. will let you know if it works....
- imported_ramu
- Post #4
- Mar 13, 2008
- Forum: Computer Building
I
new desktop assembly

Hi I assembled a desktop with msi nvidia chipset and installed ubuntu. there seems to be a problem for ubuntu in recognising the realtek onboard audio card. now i want to change to windows xp/vista. i did a single partition(250 GB hd) for ubuntu will there be any problems, do i need to...
- imported_ramu
- Thread
- Mar 13, 2008
- Replies: 3
- Forum: Computer Building
I
Does MSI P6NGM FiH motherboard support linux

Hi I am looking for linux o/s installation (ubuntu 7.10) on the motherboard msi P6NGM FiH. (intel core 2 duo E6550 cpu 2 GB ram) Did anyone try this combination. Also the nvidia drivers that i received in package are for windows XP / vista. where can i download them? Any help is...
- imported_ramu
- Thread
- Mar 12, 2008
- Replies: 1
- Forum: Motherboards
I
Need help - first time assembly

Sorry guys I am back with problem :( This time I am stuck with no power for monitor. when i connect to power, CPu fan and fan on case and also dvd drive light up, but when I connect monitor, there is no power to monitor sometimes and sometimes, if I push my VGA cable hard to mobo, no power...
- imported_ramu
- Post #12
- Feb 27, 2008
- Forum: Computer Building
I
Need help - first time assembly

THANKS A LOT, this one worked. i could see the power button GLOWING.. I will go ahead & connect my monitor....
- imported_ramu
- Post #11
- Feb 26, 2008
- Forum: Computer Building
I
Need help - first time assembly

I might have screwed it up big time, even the draining of capacitors and shorting with screw driver is not helping i will take the piece to FRY's and see what can be done But really appreciate your help. You rock...
- imported_ramu
- Post #9
- Feb 25, 2008
- Forum: Computer Building
I
Need help - first time assembly

I had this doubt in the aftrenoon, and went to fry's to check the power supply, they showed that it was working when they tried with one of the mobo's thay had. may be I will return if none of options work.. :(
- imported_ramu
- Post #7
- Feb 25, 2008
- Forum: Computer Building
I
Need help - first time assembly

i checked for the 12v powersupply in specific and found that I have not given it but gave the wrong one (4 pin of the 20+4 pin ATX supply) I have taken that one and now connected the proper one in yellow + black color I have switched it on again, but in vain for the shorting, can I use...
- imported_ramu
- Post #6
- Feb 25, 2008
- Forum: Computer Building
I
Need help - first time assembly

thanks for your reply, i checked for the pins you have mentioned in the image, they are connected to the motherboard. I am not sure if I am missing something
- imported_ramu
- Post #3
- Feb 25, 2008
- Forum: Computer Building
I
Need help - first time assembly

Hi Any help would be greatly apprecated. Intel E6550 cpu / ECS mobo 945GCT M Seagate 250 GB SATA harddisk Lite-on 20X dvd writer 2gb ram raidmax 450W power supply i did the connections but when i switch on power supply, no response. basically hv 3 jumper sttings and hv set them...
- imported_ramu
- Thread
- Feb 24, 2008
- Replies: 11
- Forum: Computer Building
I
~~~ Computer-building resource thread ~~~

thanks for this thread i am noob and really apreciate the guide with the picture. the highlight was the video which gave me enough confidnce that i can make the desktop now. one observation is that i hv not seen anyone wearing anti static wrist strap or evn mat, are they not required...
- imported_ramu
- Post #34
- Feb 16, 2008
- Forum: Computer Building

RESOURCES

Top Bottom