I am running a bit warm - 48C per monitor (better fan on order). I have newest BIOS and 4:1. When I try heavy IDE work on RAID 1 (my main HD) and use my USB pockeydrive, I get blue screen error stating that I was unable to write to C: - errors expected. This was worse before I updated the 4:1...
I have the original (?23) drivers installed and now IWILL recommends the newest (32?) drivers. Should I just install the new over the old or is there an uninstall - install procedure I should follow. Thanks in advance.
I want to capture audio from my VCR/DVD/Stereo using on-board sound. This should be the MIDDLE audio connector in the back of the mobo. With the AUX and LINE IN maxed out in the mixer the sould is still very quiet when connect the LINE-IN from my STEREO. It is only a little better with input...
KK266R 1GHz Axia TBird 200FSB unlocked L1, L7
I ran fine 133FSB@auto mult (10x). Then I overclocked to windows error and then nopost
- about 160/10x. Rebooted at 100FSB - 1GHz. Now I can't post at 133MHz/Auto (10x) anymore.
Do I have to clear my CMOS? Do I have to wait for CPU to cool? The...
I just flashed to kkr0307.bin with the telephone help of the vendor. the flash utility reported a checksum error but we proceeded anyway. PC seems to work fine...
my .02
I plugged the on/off switch into the wrong header. I got bios showing on monitor. I am proceeding. Thank you.!!
its my first time:
1. kk266r
2. tbird, with h/s and fan
3. 256 mb ram
4. vid card intstalled
5. powersupply works - tested it
I put parts together, plugged in atx connector...
I'm building my KK266R/Axia Tbird@1.4 rig with a PEP66 HS. I got the sheetmetal 80mm to 60mm fan adapter with a "quiet" fan from the vendor (set to suck.)
I understand that the reducing coupling causes significant loss of air flow. What are the benefits of putting a second 80mm fan...
I have everything for my system except the memory and cpu. I plugged in the atx connector into my new IWILL KK266R without any cards. No response from PSU when I turned it on (No fan).
Do I have a DOA or do I need to add the CPU?
If I need CPU how can I test the PSU without one?
Reived today (<24 hour response time!!)
To:
Subject: Re: Post-glitch KK266R identification
Dear :
Actually, we have no problem at all on KK266R after we double checked. The
multiplier issue only occurs on KK266. We will correct our press release
very soon.
Please remember Iwill always...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.