Recent content by iseeq4life

  1. I

    Could it be a dead 2500k?

    Forget about trying anything else. Take the motherboard out of the case. Set the board on the table / floor on top of the electrostatic bag it came with. Take the power supply out from the case and plug it into board. Leave everything else unplugged. I guarantee that it will power up...
  2. I

    86C too hot for SandyBridge?

    Back to my original question for starting this thread. I checked the temperature at stock speed with Intel Burn Test running at maximum. The highest core temperature was 61C from HwInfo64. That's HOT!!! Crappy CoolMaster Hyper212+ cooler. :mad:
  3. I

    New multiplier setting not accepted

    I have to figure out why it's running so hot. But I did have it boot to windows @ 4.9ghz last night just for fun :P
  4. I

    86C too hot for SandyBridge?

    I did all the burn test on MAX settings. I have 8 gigs of Kingston HyperX DDR3 1600 1.65V ram.
  5. I

    86C too hot for SandyBridge?

    No I left everything to Auto so far and HwInfo64 reports Vcore @ <1.31 nder load.
  6. I

    86C too hot for SandyBridge?

    Yes I am using the stuff that the cooler came with.
  7. I

    86C too hot for SandyBridge?

    I am using HwInfo64 to get my core temperatures. Not really sure why the 212+ is performing so poorly even with the case opened (room temp 76F).
  8. I

    86C too hot for SandyBridge?

    And it must fit in my Sonata IV.
  9. I

    86C too hot for SandyBridge?

    Well, just for fun I tried going up in multiplier with leaving all other bios settings in auto. I got to 4.9GHz and posted into windows and ran intel burn test for a few seconds to confirm it is indeed at that speed. VCore never went over 1.31 at full load but temp continues to climb so I cut...
  10. I

    Keyboard for HTCP setup

    Anyone has any ideas for a keyboard for a HTPC setup? I'm thinking something with the mouse built into it.
  11. I

    86C too hot for SandyBridge?

    I don't know how else to make certain that it is making good contact. I install the 4 screws 1/4 of the way on each corner and repeat until all 4 sides are tight. That's to make sure I didn't torque down one corner too much before I start on the other corners.
  12. I

    86C too hot for SandyBridge?

    I just reseated the 212+ cooler and temperature dropped 1C on two cores... Why??? I used a moderate amount thermal paste that came with the cooler. Just a small drop on the heat sink and a drop on the CPU. Thinned it out with a credit card so it has a even and flat layer across both...
  13. I

    New multiplier setting not accepted

    Well I reset the BIOS back to default and removed the windows o/c software and now all is good. I am 4.6GHZ and stable so far. Just a little warm (86 max). I'm contemplating if I should go higher.
  14. I

    86C too hot for SandyBridge?

    77 86 86 81 Those are the 2500K CPU max. temp running at 4.6GHz going full out on Intel Burn Test. Vcore @ 1.320V Do you think those numbers are unacceptable? It passed the test but should I continue to push for higher numbers? I have CoolMaster 212+ in a Antec Sonata IV case. Is it the CPU...
  15. I

    Bought a 2600k

    I don't think your board will fit in the case. Or am I wrong???
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |