just to mention on this, - my CPU-Z shows 1.385 fluctuating to 1.407 >>> CPUID AIDA shows incorrectly for this on mine (well above) so im getting the opposite to you??
I haven't had chance to push this since Bios update, these are the same overclock settings I had before the BIOS update (had to re-apply them after flash)
Looking to try and push over 4.00GHz tonight and see where I can get to, id say there is headroom as temps are low and im still below 1.45v -...
I installed the new Bios last night, it wiped all overclocked settings and would post until I "restored to default" I then went back into BIOS and set the following;
CPU @ 4.00GHz with 1.385v / memory using DOCP profile @ 2666Mhz with 1.355v (+1) - this is fully stable and hoping to push...
Give it a go @ 1.385v this worked for my 1700 @ 4.00GHz, could probably run higher as temps don't generally raise above 60c after several hour stress testing
Ram is @ 2666Mhz with 1.355v (+1) and DOCP selected. Should run at 3000Mhz but i'm happy at the moment as timings are CAS 15-15-15-35 Timings
I second this... ensure to amend the RAM voltage to something like 1.355v worked for me and I was able to set 2666Mhz with CAS 15-15-15-35 Timings, CPU is clocked @ 4.0GHz on water cooling / 1.385v and max temp never going over 60c
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.