Recent content by jawaki

J
Quick question on Asus and its readings

I have an Asus 277E and an 1800+ XP. With the stock HS and fan I got temps in the 47-50 range and now with a Coolermaster and 7500rpm fan it runs 42 idle and 46-47 under load, and that is with MB readings of 20-21 idle and 22-23 under load. Should I be doing more or should I leave it alone.
- jawaki
- Thread
- May 22, 2002
- Replies: 1
- Forum: Cases & Cooling
J
Help!!

I put a PAL 6035 with a sANYO dENKI FAN ONTO THE 1.8 and put the staock retail AMD fan heatsink combo on the 1.1TB. I used artic thermal paste. I used Ethyl Alcohol to clean the heatsinks and cpu cores.
- jawaki
- Post #3
- May 15, 2002
- Forum: CPUs and Overclocking
J
Help!!

I was playing with my Heatsinks. I have a 1.1TB and a 1.8XP. I wanted the XP cooler, so I removed both cpu's, cleaned them and put on different heatsink/fan combos. The 1.1 wouldnt boot, and after a few attempts, the motherboard caught fire. I then swapped cpus, and the 1.1 was not working. I...
- jawaki
- Thread
- May 15, 2002
- Replies: 2
- Forum: CPUs and Overclocking
J
should I lap my new pep66t?

Lap it. That way you want pull it off later because you werent sure if you should have lapped it!!!!
- jawaki
- Post #2
- Mar 18, 2001
- Forum: Cases & Cooling
J
Which HSF for 1.2tbird?

And if you do mind then try a PAL or Taisol. Or even a FOP with a Sanyo Denki fan.
- jawaki
- Post #3
- Mar 14, 2001
- Forum: Cases & Cooling
J
New Taisol CGK760092 heatsink/fan review!

Looks like suck to me.
- jawaki
- Post #3
- Mar 11, 2001
- Forum: Cases & Cooling
J
FOP-38 Question!!

With the FOP 38/Delta I was getting about 55db from my case. Switching to a Sanyo Denki (I'll measure it when I get home) its quieter but also there is an aspect of the delta sound that is plain irritating beyond its actual volume. Lets say for example you could hear a 30db level of 1: ocean...
- jawaki
- Post #7
- Mar 7, 2001
- Forum: Cases & Cooling
J
Easy 80 mm fan mod for FOP32/38

I wonder if mikewarrior2 has any comments on this. A thought I would have is that sucking air would be better than blowing air because to suck it is really venting it out thru the air being exhausted out the case rather than blowing the hot air into a turbulence as it hits themotherboard...
- jawaki
- Post #12
- Mar 3, 2001
- Forum: Cases & Cooling
J
Easy 80 mm fan mod for FOP32/38

Case temp 22 PAL6035 with sanyo denki=35 PAL6035 with delta cpu=31 FOP38 with Antec 80mm fan=34 FOP38 with delta+29 All on my MSI. I would guess as mikewarrior has pointed out that the 1 - 2 degree difference is more in actual cpu temps. So for now Im back with the noise.
- jawaki
- Post #6
- Mar 2, 2001
- Forum: Cases & Cooling
J
Easy 80 mm fan mod for FOP32/38

How hot was it before the 80mm fan? And would the center of the cpu get enough air? Im seriously going to try this mod.
- jawaki
- Post #3
- Mar 2, 2001
- Forum: Cases & Cooling
J
CPU & Case Temp, Is this right?

Where can I find the aformentioned MBM?
- jawaki
- Post #4
- Feb 28, 2001
- Forum: Cases & Cooling
J
Should the fan blow onto OR suck air from the heatsink?

Depends on the heatsink. The PAL6035 sucks air away from the heatsink and alomost all others blow air onto the heatsink.
- jawaki
- Post #2
- Feb 27, 2001
- Forum: Cases & Cooling
J
Best clip: Alpha pal6035, fop32, volcano II, or Vantec FCE-62540D ?

Alpha is the easiest for me anyway. The FOP was a nightmare. Also the clip has two pieces and the part with the hole came off as I was trying to remove it. Next time I install it I will use the clip from the Taisol on the FOP. I have no experience with the Vantec. BTW Im now running the PAL...
- jawaki
- Post #11
- Feb 26, 2001
- Forum: Cases & Cooling
J
Just got my new Antec case

Ericlp: I bought it from Bestbuy for 99. I believe you can get it cheaper elsewhere. It has the Antec 300W PS. It now runs with the Sanyo Denki. In my enthusiasm I burnt out the fan header and so am able to run the Sanyo from the fan2 connector. Oddly it runs at 3900.
- jawaki
- Post #8
- Feb 26, 2001
- Forum: Cases & Cooling
J
MSI MS6330 K7TPro2

Thanks.
- jawaki
- Post #3
- Feb 25, 2001
- Forum: Motherboards

RESOURCES

Top Bottom