No i,m using the corsair A70 push/pull with 2 sythe 120mm fans im not trying to get any more than 4.6ghz im just trying to get the bios stable at that and try to keep the heat down i know before i reset cmos i never went above 61.c under full load with most of the bios settings set manual now...
Hi again, i know some of you have seen my threads before but im not seeming to be getting any replies ive been trying to change my bios settings manually to run my machine on a saved profile of 4.6ghz for gaming and converting video to high definition. when i got my bundle it came from...
Hi all, ive been playing with my new builld for the last few days to gain knowledge and for benchmarking as it interests me alot. So far i have managed to get to 4.4ghz with only 2 changes in bios, voltage to 1.310v and loadline to extreme. I also managed to get my RAM to run at 1833mhz with no...
Just testing what speed is gets to stable without changing volts or timings, dont plan on keeping at that speed. Been playing with settings a little to try get that 1.310v down a little but no one seems to be able to help me really apart from ask why i want to overclock :(
Hi, im looking for help to get my bios settings set manually for a stable overclock @4.4ghz as default all ways seems to over do the settings a little. I have only changed so far the cpu voltage to 1.310v multiplier to x44 and load line to extreme. My temps are 24-27.c idol and up to 73.c...
Hi all, ive been messing around with my system to try get it running the best it can be. Ive run quite a few benchmarks but all ways seem to be in the bottom results although ive seen some scores in the top results with systems exactly the same as mine... So, i wanted to ask for your help...
hi mrk6,
i am using msi afterburner to overclock my temps are 70.c under full load, i have fan on 100% as it uses the new windforce twin cooler and can hardly hear it.
when it crashes i dont get any artifacts on the screen it jst goes black and a no signal comes on the screen and i have to...
i am planning on going sli in the next few months and also adding a ssd ive checked the psu it must a crap one as it only cost me £33.98 lol i think ill go for a decent corsair psu this time im sure when its overclocked its not supplyinh enough power
since im new to the i7 i only change the multiplier to x44 leave bclock at stock my vcore is 1.310v and ram is @ stck 1333mhz even tho the ram has a xmp for 1600mhz the psu is a rather cheap one i must admit did not buy a new one for the build to save on money for the i7 and board. ill find out...
hi anandtech,
i have upgraded from my socket 775 to a sandybridge i7 2600k specs are in my sig.
the problem i am having is getting all the bios setting correct for a decent overclock. i am wanting to get it to around 4.4ghz my cooler keeps it in low 60's using prime95 but i keep getting workers...
hi all,
im having a few problems trying to o.c my card it all ready has a factor o.c from 822-900mhz on core clock and a little on memory but i cant even get it to go up another 10mhz without it crashing on me any help would be greatful.
also how do i add my sig rig ?
thanks for looking.
jdfox
my first overclock was on a asus p5q deluxe board using a q6600 chip and 4gb kingstan hyperX ram 2.4ghz to 3.4ghz ran like a dream untill i upgraded to the sandybridge i7 where i am now having problems with graphics when oc think my psu is on the brink cos i keep losing singal and get a driver...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.