Recent content by JingHola

J
null/void

Hi Evan, I would like to see you review the overall capabilities of the boards to use more than one DIMM memory module with various brands of PC2700 memory. I recently bought an Epox 4G4A+ board and found that it would not run two sticks of Samsung PC2700 CL2.5 rated mem modules at the DDR333...
- JingHola
- Post #7
- Aug 1, 2002
- Forum: Motherboards
J
The EPoX 4G4A+ seems very promising.

GotoDengo, thanks for the info on Epox 4G4A+ MB from the French site. I don't read French but tried to use the language translator site to translate the small blurp that I found at the link you gave us. I really does not tell us much details on what the probs were and what the fix was on the...
- JingHola
- Post #530
- Jul 31, 2002
- Forum: Motherboards
J
Which P4 Can Reach Highest Overclock Speed

Oh Okay HeinrichX, Thanks! I guess one day when I get the right stuff together I may be able to overclock this 2.26B to 3Ghz then...!?! :-) Right now, I cannot seem to get much out of it with my stock HSF that came with it and my Epox 4G4A+ MB. I think it is my Samsung DDR333 RAM that is...
- JingHola
- Post #6
- Jul 29, 2002
- Forum: CPUs and Overclocking
J
Which P4 Can Reach Highest Overclock Speed

Hi all this mention to the P4 "a" or "b" type processors as in 2.26a or 2.26b has me wondering which chip I have... how does one determine what CPU type "a" or "b" they have? I have a P4 2.26Ghz CPU but don't know if it is a "a" or "b". On the box it says: PROD CODE: BX80532PE2266DSL67Y MM#...
- JingHola
- Post #4
- Jul 29, 2002
- Forum: CPUs and Overclocking
J
Help! epox 4g4a+ won't post, wails like a banshee!

I would assume that you have already double checked your connections and everything, but I will mention it anyway, that whenever I got that wailing siren PC speaker error sound and no post LED light codes it was always (for me) that the memory module was not seated correctly in the DIMM memory...
- JingHola
- Post #2
- Jul 28, 2002
- Forum: Motherboards
J
Help overclocking 2.26B Northwood

LAtest update, I had a slight hiccup with my video card OC at 300/550 yesterday... so I have now backed it down to 290/525 core/mem speed and ran it all day with no problems. Also I FYI for any that may perhaps this thread... I found the problem and a fix for the problem of system instability...
- JingHola
- Post #16
- Jul 28, 2002
- Forum: CPUs and Overclocking
J
The EPoX 4G4A+ seems very promising.

Acer, you are right again, I forgot about that fact... I remember looking at the Epox recommended compatibility listings awhile back and did not see the P4 2.26Ghz, 533Mhz CPU processor listed for this 4G4A+ board either! I said to myself, how the heck could a MB maker not test and list all...
- JingHola
- Post #518
- Jul 28, 2002
- Forum: Motherboards
J
The EPoX 4G4A+ seems very promising.

Okay I just got done testing out my system with two 512MB PC2700 (DDR333) CL2.5 rated Samsung memory modules in slots 1 and 3. It did not take long for my WinXP system to freeze up. It booted a couple of times into WinXP successfully but as soon as I started IE6 browser and start doing things...
- JingHola
- Post #515
- Jul 27, 2002
- Forum: Motherboards
J
The EPoX 4G4A+ seems very promising.

Acer, I am running all voltages at the default settings and I had also tried increasing the Vdimm memory voltage up to the max +0.7 and still the system would freeze up with two memory sticks installed in slot1 and slot2. I have not tried putting them in slot1 and slot3 combination and I also...
- JingHola
- Post #513
- Jul 27, 2002
- Forum: Motherboards
J
The EPoX 4G4A+ seems very promising.

Hi, I am experiencing instability and freeze ups when using two Samsung 512MB DDR PC2700 CL2.5 mem sticks populated in DIMM slots 1 and 2. With only one stick of 512MB mem in either DIMM slot 1 or slot 2 the system runs stable. With two sticks, even though the system recognizes 1GB installed...
- JingHola
- Post #504
- Jul 27, 2002
- Forum: Motherboards
J
Help overclocking 2.26B Northwood

AnAndAustin, I gave up with trying to run with two 512MB mem sticks and took one stick back out. I still experienced lockups with running two mem sticks in this Epox 4G4A+ board this morning. Anyway, with one 512MB stick in DIMM slot 1, it is running stable with no freeze ups whatsoever. So I...
- JingHola
- Post #14
- Jul 27, 2002
- Forum: CPUs and Overclocking
J
Help overclocking 2.26B Northwood

Hey thanks for the summary of pointers on the GF4 TI4200 overclocking AnAndAustin! I have downloaded coolbits and the latest nVidia Detonator driver and have tested them out. Unfortunately I am having mucho instability problems with running two 512MB memory sticks installed in my system (1GB...
- JingHola
- Post #12
- Jul 27, 2002
- Forum: CPUs and Overclocking
J
Help overclocking 2.26B Northwood

Well, guess what? My system had a crash again after running well for awhile... I gave up now. Also I tried to install two memory sticks of 512MB Samsung type DDR333 in mem slots 1 and 2. It booted up and recognized 1GB of RAM installed ran for a little while and then when I started doing normal...
- JingHola
- Post #10
- Jul 26, 2002
- Forum: CPUs and Overclocking
J
Help overclocking 2.26B Northwood

Okay, I got around to try raising my Vcore voltage to about 1.7v in BIOS and Vmem boosted by +0.1v and am running at FSB=156, Auto DDR setting (DDR=312). Have had it running Sandra Burn-In for 15 cycles while I am surfing this forum and also playing my AverMedia TVStudio TV tuner card at the...
- JingHola
- Post #8
- Jul 26, 2002
- Forum: CPUs and Overclocking
J
Epox 4G4A+ weak audio output & slow File System Benchmark?

Crapito, no I have not changed any of the vcore, vmem voltages yet. I ran all tests with default voltages. Since I do not have fancy cooling, I did not want to generate extra heat. I may give it a try for a short period to see how it holds up. BTW, I should mention that I am using some cheapo...
- JingHola
- Post #11
- Jul 26, 2002
- Forum: Motherboards

RESOURCES

Top Bottom