Card runs cool, 30 degrees idle / 60 degrees max.
I have a few spare PSU's but none of them have enough pinouts for 2x PCIe power, and I don't have any LP4 to PCIe adapters.
Tbh I'm wary to blame the PSU. I can run furmark and game on this card for hours without issues. As soon as I stop the...
Specs in signature...system is older but has served me well for years.
Nothing has changed but over the past few months I've been getting random Nvidia driver crashes, system reboots, and unresponsive black screens. Reset the system back to stock clocks but the issues continued. After trying 5...
the reason your previous dual-wireless link configuration worked was that the same ISP was providing both links and they can route their public IP addresses across both circuits (inbound & outbound).
with 2 different ISPs, this is not possible. you will have 2 different ISP-owned public...
not very difficult when the entire country is smaller than our 10th largest state. also, let's see the speeds outside of that carrier's network.
Romania = 90,000 square miles
USA = 3.794 million square miles
you aren't going to have the intelligence on an access layer switch to classify and mark application specific traffic, nor would you want to manage these policies at this layer. also, i don't think Citrix can automatically mark ICA traffic and doing so on an OS level might be...
what kind of VoIP system and make/model routers? the easy answer is a type of VPN, or IP Phone SSL VPN on Cisco phones :)
the trouble with VoIP and NAT is the large number of negotiated UDP ports (for rtp media) required to be forwarded. check the PBX model for the defined port range and...
remove the default gateway address from your wired connection (may need to set a static IP address). the default gateway should only exist on the connection which is internet-accessible.
make/model of routers and phone system? are you testing connectivity from the subnet of the phone system in the 4th site? are you sure there are no inspection rules on the router/firewall?
ask the phone vendor for logs...i don't know what "will not communicate" means. is the h.323/sip peer...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.