I don't have any either, but I read an announcement from Phillips stating that due to customer complaints they are sending out a new firmware update that will Undue the previous update that prevented the use of NON-Phillips Bulbs.
I used your Wink, Tasker script for Google voice control. Excellent Script, Thank you for the hard work. I was thinking of using your "unlock" addition, but decided against it because all my windows are at ground level. I could imagine a burglar yelling "Alexa Unlock Door" through a window. I...
You are correct. I checked the missing shortcuts yesterday and found that they all contained an "Unlock" command. Removed 'unlock' from 1 and it immediately showed in the drop down list. You can use shortcuts with 'Lock', but not 'unlock'. Apparently IFTTT blocks 'unlock' for security reasons.
Purchased Echo for $150. Very pleased with it. One problem I'm trying to fix, however, is with IFTTT. Setting up Trigger to Wink Shortcuts. Some of my shortcuts are not showing up in the IFTTT 'Then' drop down list so I can't set them. Don't know if the problem is with Wink or IFTTT.
Aisle which has all the LED Bulbs, Wink Hub, etc. Behind a box of Lutron Connected Bulb remotes on bottom shelve. I took all the ones I found there (3 Boxes)
Went to HD to get a link bulb. When I pulled it from the shelve, found 3 boxes of Trippers behind it. At the register they rang up for $10 each. Only $5 per Tripper! The only way it good have been better would have been for MORE boxes to be there!
Robots & Sunset
I have a robot that turns on a light when motion is detected in a room. I set it to work after Sunset. The Motion Detector is detecting motion, but the light won't turn on. If I change the Robot to "Anytime" instead of "Sunset" it works. I also have 'scheduled ' other lights...
Thanks to all who replied. Right now I have about a 2 second delay when turning on lights with Wink and around 4 seconds for the door lock. As someone here mentioned, these delay problem may be solved if/when Wink implements local control.
My choice right now is to buy 1 detector and see...
I am planning on adding a couple of motion detectors to my system. Primarily to turn lights on/off. These two are priced about the same. The GoControl is listed in the Wink App. The Ecolink is not, but can be added under Z-wave sensor.
I am concerned about possible delay activating lights when...
After I set up my wink hub, I was looking for some Wi-Fi Bulbs and saw they were going for around $16 each. The GE-Link Starter Kit contained 2 of these bulbs for $25, so I bought 2 of these kits just for the bulbs.
I am now wondering if there is some useful task that I could do with the 2...
Anyone know if the sensor has to be aligned with the 'Narrow" edges face to face. It will be extremely difficult, perhaps impossible for me to do it in that manner for both my windows & doors. I know that the magnet has to 1/8 inch from sensor, but will it work probably if the narrow edge of...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.