I have not built a computer in a while and have some questions about the built in video on the Asus Z97 pro motherboard. I understand that the video connectors that are integrated with the motherboard will work with the Intel CPU that I put in. I am using an i7 4790k just for reference.
If I...
hmm what do you mean by "everything else is working". besides that problem, the console runs great. I thought the warranty's purpose is for when something isn't working.
Anybody have problems with their PS4 where the PS4 wouldn't eject disk? The console also continuously tries to eject a nonexisting disk. This happens intermittently and is usually solved if I completely turn the console off, unplug for a couple of minutes and plug back in. It is the same problem...
well it just happened again and right before it happened the temps were around 40's to 50's degree celsius. I don't think that temperature is that bad. I will try to run memtest later today to see if its the memory.
also i notice that that the bluescreens are not always the same. sometimes it...
Recently, I've been getting random blue screens that can happen as often as 2 times in an hour. I have not changed anything hardware-wise recently. The blue screen usually says system_service_exception and writes a memory dump. I am really stumped as to why this could be happening. Is there...
I'm usually just using the flux in the solder itself. But yeah I also use the same method. I put solder on one pad then reflow the solder onto one pin to hold it in place. It's just that when I'm adjusting the IC while trying to reflow the solder, I worry that the IC may be getting too hot.
so if an IC is cooked or overheated from soldering, is there any visual way to tell? also i've had to solder brass sma connectors on the boards. after soldering it on, i noticed that the entire board got pretty hot/warm. would that damage anything? because there is a lot to solder on the...
i was able to test my resistors and they were still showing the correct value after being soldered. but how do i test capacitors, inductors and ICs (amplifier)
Well the temp we use is about 750f. And whenever I'm soldering, the iron doesn't stay there longer then maybe 2 seconds at a time. Is this bad? I'm not sure how I would use a heatsink during soldering.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.