Hey folks,
I'm having an issue while needing to do a Windows repair ("missing or corrupted system/config file" situation) on a system that's running a Highpoint 1640 RAID card (3 drive RAID array). The XP setup obviously does not find any drives on the system when setup is initiated, but...
Hey. While nobody here has been able to help with this question, I did get a response on the question from the tech guys at BIOSworld.com. The FL49020 chip is a 2mb BIOS chip and will not work in the A7N8X Deluxe (which requires a 4mb BIOS chip).
I thought I'd post the info for anyone else...
Hey. I've read through the FAQ thread and didn't find any particular info for my question, so I'm asking it generally. I have a bad BIOS (flash death situation) on my A7N8X Deluxe (rev 1.04 board). The replacement BIOS for the board is ordered but is on back-order until February (imagine...
OK, I've searched the thread and I'm not finding the answer...
What are my options after a bad flash? I tried flashing to 1007 in an attempt to get my burner working, and the result is a non-posting board. My board is Rev 1.04 and it had BIOS 1004 going. I used the correct 1007 (file for...
Hey. Yes, I am sure that my Soltek KT266a board will not run the T-bred. I have tried all the available BIOS updates, and it's still a no-go. The likelihood (based on what I'm seeing with other KT266a boards) is that the problem is only with the XP2000+ and 2100+ T-breds. The Rev2 K7S5A is...
Hey guys. In my recent other thread I was asking for help getting my Soltek KT266a mobo to run a T-bred XP2100. It won't run it. I do have another motherboard that will run the T-bred 2100--an ECS K7S5A rev2 (SiS chipset). So I'm wondering which of the two following mobo/cpu combos is going...
Hey again...
No joy on the T-bred 2100, even with the 4.2 BIOS. I did notice on the Epox chart (mentioned above) that some of their 266a boards that run T-breds won't run the XP2100 T-bred. Odd, eh? Well thanks for the help. It might be time to upgrade to a KT333 or KT400 board, anyway.
:)
OK, I have flashed to the rev4.2 BIOS, and everything is running great. I will swap out the CPUs (removing XP2000+ Palomino and installing XP2100 T-bred) and post again....
Thanks, guys. I saw that BIOS file, but did not download it because it's designated 4.2 and I was under the impression that my board is Rev 4.1. I'm supposing though, that the BIOS is Rev 4.1, not the board.
:)
I will try it and see what happens.
Hey. I have a Soltek 75DRV4 (Rev4.1) and I've tried installing a T-bred XP2100 with no luck. The board runs an XP2000+ (Palomino) with no problems whatsoever (of course). I've checked out the Soltek site and have seen little helpful info there. I did notice on the Epox site, though, that...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.