Recent content by liyi0522

L
what kind PSU do I need for this rig?

I have old OCZ 700W PSU, I recently upgrade my computer. I am running i5 2500k OC to 4.8, 16GB memory, 3 SSD and 1 HD, GTX560 Ti, 5 case fan and H60 water cooler. My old PSU only has 2 6 PIN PCI-E, If I need run SLI, I need new PSU. Dose 850W PSU enough for my rig? Do I need 1000W? Thank you...
- liyi0522
- Thread
- Dec 28, 2011
- Replies: 1
- Forum: Power Supplies
L
Compare 5 motherboards: ASrock / ASUS

Asrock extreme3 Gen3!
- liyi0522
- Post #3
- Dec 14, 2011
- Forum: Motherboards
L
560Ti SLI plus i5 2500K oc to 5.0

I had OCZ 700W PSU, runnung single 560Ti OC to 950 and i5 2500K OC to 5.0 under 1.32v with Corsair H60 and 4 other case fan with fan controller. If I need upgrade to SLI setup, do I need new PSU? 850 is enough?
- liyi0522
- Thread
- Dec 12, 2011
- Replies: 2
- Forum: Power Supplies
L
Which 140mm for exhaust??

cougar cf-v14s http://www.newegg.com/Product/Produc...e=140mm&Page=2
- liyi0522
- Post #2
- Dec 11, 2011
- Forum: Cases & Cooling
L
Corsair H60 push pull setup

I just bought H60, try to run push pull in my Antec 300 case. Do you know where can I get the long screw to tight the second fan on the radiator?
- liyi0522
- Thread
- Dec 11, 2011
- Replies: 0
- Forum: Cases & Cooling
L
2500k @ 4.5ghz with Vcore @ 1.18

No trade! you can get from MC for $179 as same batch number. IBT and prime95 which program offer more stress to CPU? I will leave my PC on tonight, and take VD tomorrow.
- liyi0522
- Post #52
- Dec 11, 2011
- Forum: CPUs and Overclocking
L
2500k @ 4.5ghz with Vcore @ 1.18

Thank you so much, you are the only one help me. It is running 5.0Ghz under 1.34 to 1.35 on CPU-Z, and between 1.37 to 1.32 at CPUID Hardware Monitir. Full loading at Prime95, and temp are 57, 62, 65, 62. Try to post the pic, but don't know how, I will post video later.
- liyi0522
- Post #47
- Dec 10, 2011
- Forum: CPUs and Overclocking
L
2500k @ 4.5ghz with Vcore @ 1.18

I got from MC for $179, batch number is 3134b516! Sales Assoc ID is Enrico Dela Paz. I try to post the screen shot, but don't know how. Someone can help me?
- liyi0522
- Post #46
- Dec 10, 2011
- Forum: CPUs and Overclocking
L
2500k @ 4.5ghz with Vcore @ 1.18

can you tell me how to post the pic?
- liyi0522
- Post #45
- Dec 10, 2011
- Forum: CPUs and Overclocking
L
2500k @ 4.5ghz with Vcore @ 1.18

tell me how to post the pic, i can show you. I am recording vd now, will post on youtube later.
- liyi0522
- Post #44
- Dec 10, 2011
- Forum: CPUs and Overclocking
L
2500k @ 4.5ghz with Vcore @ 1.18

What is ibt? I am not try to sell my chip, I got from MC for $179, batch#3134B516. I am here try to get this chip full load.
- liyi0522
- Post #42
- Dec 10, 2011
- Forum: CPUs and Overclocking
L
2500k @ 4.5ghz with Vcore @ 1.18

Thank you, I set it as offset. My bios version is 1.2. I will try it tonight. BTW I hit 5.0 last night with 1.32v.
- liyi0522
- Post #28
- Dec 10, 2011
- Forum: CPUs and Overclocking
L
2500k @ 4.5ghz with Vcore @ 1.18

I have ASRock Extreme 3 Gen 3 pair with i5 2500K, 1.25V OC to 4.8. When I run prime95, some time it shows 4.1 to 4.3 at CPU-z. You guys have same problem?
- liyi0522
- Post #25
- Dec 10, 2011
- Forum: CPUs and Overclocking
L
ASRock Z68 Extreme3 Gen3

ASRock Z68 Extreme3 Gen3 and H60 water cooler, try to OC my 2500k. Anybody use same board and cooler? Any tips for coller install and OC on this motherboard? BTW I am using G.SKILL RIPJAW DDR3-1866 memery and Antec 300 case.
- liyi0522
- Thread
- Dec 3, 2011
- Replies: 3
- Forum: Motherboards
L
CORSAIR H60 in Antec 300 case

ASRock Z68 Extreme3 Gen3 and H60 water cooler, try to OC my 2500k. Anybody use same board and cooler? Any tips for coller install and OC on this motherboard? BTW I am using G.SKILL RIPJAW DDR3-1866 memery and Antec 300 case.
- liyi0522
- Thread
- Dec 2, 2011
- Replies: 7
- Forum: Cases & Cooling

RESOURCES

Top Bottom