Recent content by macpeteo

M
Gskill or Patriot.... Which set would you choose?

Need a little help with CPU-Z: When I bring it up and look at the memory tab, it shows: DRAM Freq:266.7 FSB:DRAM 1:1 4 4 4 12 2T The SPD tab shows my memory to be: PC2-6400 (400MHZ) G.Skill F2-6400PHU1-1GBHZ Timngs Table shows: JEDC#1 266MHz 4.0 4 4 10 12 1.8V JEDEC#2 400Mhz...
- macpeteo
- Post #5
- Jan 29, 2008
- Forum: Memory and Storage
M
sound card reccomendation?

Ok, I'll try again. I'm looking for a audio card that has the "Front Panel Header Audio Connector". I currently have the Creative Sound Blaster XFi Xtreme Audio S/N 70SB079000000 Any one know of one or is using it with head phones? Thanks, Macpete
- macpeteo
- Post #24
- Jan 20, 2008
- Forum: Peripherals & Components
M
sound card reccomendation?

Need a bit of advice folks, I want a Audio card that has the two rows of pins to support a Mic/Headset jack from the front of the PC. My MoBo has it but the audio does not work. Bought a Creative Sound Blaster X-Fi Xtreme Audio which has the connectors but the Mic volume is so bad that I cant be...
- macpeteo
- Post #21
- Jan 19, 2008
- Forum: Peripherals & Components
M
*** Official Gigabyte P965-DS3 Thread ***

Na, the SB Audigy card I bought yesterday and installed just so as to have some audio. So, if I uninstall all the drivers under the Sound/video and game controllers and try reloading the Realtek drivers from Gigabyte site you think that will do it? Is there a way for me to check if the OS...
- macpeteo
- Post #1,959
- May 19, 2007
- Forum: Motherboards
M
*** Official Gigabyte P965-DS3 Thread ***

>>I installed "Realtek Function driver for Realtek Azalia audio chip (Including Microsoft UAA Driver in English edition)" from drivers section for GA-965P-DS3 (rev. 3.3) at Gigabyte's site. hope it helps! << Ya, I did the same but I did not get the nor do I have the entry in the devices...
- macpeteo
- Post #1,956
- May 19, 2007
- Forum: Motherboards
M
*** Official Gigabyte P965-DS3 Thread ***

This is the one u want: http://clubit.com/product_detail.cfm?itemno=A4830994 -Macpeteo
- macpeteo
- Post #1,954
- May 18, 2007
- Forum: Motherboards
M
*** Official Gigabyte P965-DS3 Thread ***

>>Did you look in Control Panel>System>Device Manager, to see if the drivers installed properly?<< Just looked in there now and I don't see anything that I could recognize as being associated with Realtek. I'm looking at the "Sound, video and game controllers" directory and I don't see...
- macpeteo
- Post #1,951
- May 18, 2007
- Forum: Motherboards
M
*** Official Gigabyte P965-DS3 Thread ***

Help!!!! Just installed everything (WinXP Pro) and all the drivers but I have no audio and my cntrl panel "Sounds and Audio" has "No Audio" in it, what is going on, is my audio chip bad, is there a way to test it. All applications that use audio come back with error "xyz has detected a...
- macpeteo
- Post #1,949
- May 18, 2007
- Forum: Motherboards
M
*** Official Gigabyte P965-DS3 Thread ***

Hi everyone, I have finaly got my DS3 rev3.3 up and running butttttt I'm have audio problems, I installed the audio drivers off of the Gigabyte website but I dont have any application! And if I try to use a audio CD in my SATA drive it says:application xyz detected a problem with your...
- macpeteo
- Post #1,945
- May 17, 2007
- Forum: Motherboards
M
*** Official Gigabyte P965-DS3 Thread ***

Having audio issue also, have my case wires AC'97 plugged into the auidio pins but I dont get any sound out on my headphones :( Havent tried hooking up speakers yet, will do that in a week or soo but I should have audio on my headphones, is there a setting ? My BIOS is set to "Azalia...
- macpeteo
- Post #1,849
- Apr 30, 2007
- Forum: Motherboards
M
*** Official Gigabyte P965-DS3 Thread ***

GOOD NEWS!! :) Got my DS3 and E6600 up to 2.4Gig (yes I know, a small feat) but......... Anyway, I followed the following directions: Clocking 1. Make sure that you have the latest chipset drivers and flash the board to the most recent bios version 2. On the main bios screen press...
- macpeteo
- Post #1,846
- Apr 30, 2007
- Forum: Motherboards
M
*** Official Gigabyte P965-DS3 Thread ***

Yup, 1.39, just cant believe that everything I've done has no effect, even cranked up the CPU voltage to about 1.31xx and it still showed the same multiplier. although it did show the higher CPU voltage. -macpeteo
- macpeteo
- Post #1,840
- Apr 29, 2007
- Forum: Motherboards
M
*** Official Gigabyte P965-DS3 Thread ***

Um, I dont get it, I would think that right out of the box, the DS3 with a E6600 would be set to run at stated E6600 speed without medoing anything to it. But be it as it may, does any1 have the exact settings I can use to at least see 2.4-9 on CPU-Z? Right now, everything I tried still...
- macpeteo
- Post #1,837
- Apr 29, 2007
- Forum: Motherboards
M
*** Official Gigabyte P965-DS3 Thread ***

Need a little help here. Got my DS3 up and running on one drive and went ahead and played around with some settings. My BIOS is the F10, settings are, CPU E6600: CPU Clock RAtio 8x CPU Host Clock Cntry [Disabled] CPU Host Freq 266 My memory is set to 4-4-4-12-2T at 1.9v Stock CPU/NB...
- macpeteo
- Post #1,835
- Apr 29, 2007
- Forum: Motherboards
M
*** Official Gigabyte P965-DS3 Thread ***

Hey all, just got my DS3 MB and I have everything set up, system posted, made my initial settings and loaded WIN XP, using F6 loaded the JM RAID driver and set it up for RAID 1 using Cntry G. Anyway, system was happy and everything was going along great, WIN asked to formate drive, I did the...
- macpeteo
- Post #1,834
- Apr 28, 2007
- Forum: Motherboards

RESOURCES

Top Bottom