Recent content by MADhix

M
Prime95 rounding errors, not overclocking!

I changed my avatar respectively.
- MADhix
- Post #33
- Jun 17, 2004
- Forum: CPUs and Overclocking
M
Prime95 rounding errors, not overclocking!

It is running in dual channel mode. One of the memory buses is not entirely up to spec. Thanks for all the help everyone! Time to get back to living on a reliable computer... Ahhh.
- MADhix
- Post #32
- Jun 17, 2004
- Forum: CPUs and Overclocking
M
cannot achieve more than 200x11 on A7N8X-X (Athlon-M 2400+)

Try switching a RAM stick to another DIMM. I could not run my stable on one DIMM but another ran fine.
- MADhix
- Post #10
- Jun 15, 2004
- Forum: CPUs and Overclocking
M
Prime95 rounding errors, not overclocking!

I moved one of my RAM sticks to another DIMM and it has been running for almost 25 hours now. I think it was that one memory bus.
- MADhix
- Post #29
- Jun 15, 2004
- Forum: CPUs and Overclocking
M
Prime95 rounding errors, not overclocking!

Also, I have another question which indirectly concerns CPU stability. I recently bought a new Antec TrueControl 550 PSU. I can not get the +12, +5 and +3.3 rails to stay at spec. Should I run them just below spec where they will never go above or just above spec where they will never go below...
- MADhix
- Post #27
- Jun 14, 2004
- Forum: CPUs and Overclocking
M
Prime95 rounding errors, not overclocking!

Well, what should I do? Run CAS 3.5? By the way, it passes everything stock with RAM at 83% of FSB. I am running another test now with one DIMM moved to another location (still in dual channel).
- MADhix
- Post #26
- Jun 14, 2004
- Forum: CPUs and Overclocking
M
Prime95 rounding errors, not overclocking!

Oops, I did not see a second page. I was referring to myocardia.
- MADhix
- Post #25
- Jun 14, 2004
- Forum: CPUs and Overclocking
M
Prime95 rounding errors, not overclocking!

I have never heard of that.
- MADhix
- Post #24
- Jun 14, 2004
- Forum: CPUs and Overclocking
M
Prime95 rounding errors, not overclocking!

I am running prime95 again except this time I changed the RAM to be 83% of FSB which yields 166MHz. Couple of things I noticed. I set my FSB to 200MHz manually and yet CPU-Z says the FSB is 199.2. I also have my vcore set to 1.650 in BIOS and CPU-Z in a two minute time frame will read vcore of...
- MADhix
- Post #14
- Jun 13, 2004
- Forum: CPUs and Overclocking
M
Prime95 rounding errors, not overclocking!

I ran memtest for ~24 hours and It passed. I don't know exactly which settings I picked; although, I think it was the standard test or something. I don't really remember.
- MADhix
- Post #13
- Jun 13, 2004
- Forum: CPUs and Overclocking
M
Prime95 rounding errors, not overclocking!

Well, it just failed. "FATAL ERROR: Rounding was 0.49858284, expected less than 0.4" Does anyone have any ideas?
- MADhix
- Post #10
- Jun 13, 2004
- Forum: CPUs and Overclocking
M
Prime95 rounding errors, not overclocking!

Right now I am running the test with 200MHz FSB, RAM synced with FSB, vcore at 1.65 (stock), vdimm at 2.6 (stock), timings at 3-3-3-8 (I think these are the standard timing for my RAM, all I can find on www.kingston.com is 3-3-3), agp voltage at 1.5 (default), agp aperture 64MB with BIOS Rev...
- MADhix
- Post #9
- Jun 13, 2004
- Forum: CPUs and Overclocking
M
Prime95 rounding errors, not overclocking!

I don't think I can change the multiplier.
- MADhix
- Post #6
- Jun 13, 2004
- Forum: CPUs and Overclocking
M
Prime95 rounding errors, not overclocking!

Woops, I forgot to say that. I ran memtest with my old 3200+ I believe and it ran 24 hours with no errors.
- MADhix
- Post #4
- Jun 13, 2004
- Forum: CPUs and Overclocking
M
Prime95 rounding errors, not overclocking!

Sorry, I forgot to say that the max load temp with the new 3200+ is 45-47C (ambient temp alternates a lot).
- MADhix
- Post #3
- Jun 13, 2004
- Forum: CPUs and Overclocking

RESOURCES

Top Bottom