ya, i flashed back to my old bios
i already had it modded to 1.4v and so the gainward gs bios didnt help me at all
expert tool was cool, but i couldnt get my fan to work
so i guess ill stay at 400/1100 which is more than i could have asked for
i got mine to 2.5GHz (250x10) and it was completely stable for every game or program I used, but didnt pass Prime95
so i backed it off to 2.4GHz and it passes 24+ hours of testing with prime95
EDIT: forgot to mention that my 2x512MB Corsair PC3200 XLPT was able to run at 1:1 at DDR500...
ok, nevermind
load temp just hit 60C !!!!
while running prime95
im going to lower the vcord right now!
(these temps are accoring to MSI Core Center but id rather be safe than sorry)
i just reset my bios and while running with no overclock at all i fail Prime95 within 5 minutes....still
also i ran Memtest86 (didnt use 86 before) and it passes everything
could there be a problem with my CPU or MOBO?
i tried slots 3 & 4 and I thought it fixed the problem because it ran for 16minutes! over 3 times as long as ive ever had it go before.
but then i got another damn error
i set vdimm to 2.8v
and changed the timings to 2.5-4-4-10-2T (1T wont post)
and it still fails prime95 within 5 min
also, is my memory Samsung TCCD ?
and if so, should i flash my bios to 1.41 since it is supposed to help overclocking TCCD memory?
I have my new system overclocked to 2.5GHz and it runs all the benchmarks fine, but fails prime95 within 5 minutes. I would like help getting it more stable at 2.5GHz or higher and possibly getting my memory timings a little tighter. Also, possibly getting my 6800gt faster. I dont want to...
you do have to remove the backplate when installing the 948U
so simply press down on one of the screw holes that stick up through the mobo until it starts to peel off
then just continue to peel it away
larger video cards are a problem with the k8n neo2 plat and the 948u heatsink
i have...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.