Recent content by MooShoe

M
IWILL KA266 Jumpers

The wake on modem/lan connectors are not jumpers. If you have a modem/nic that support these features, you will have a 3 pin cable that attaches your modem/nic to the mother board. This is telling you the pin config, not which pins to put a jumper on. If you do have a compatible modem, the...
- MooShoe
- Post #5
- Jun 20, 2001
- Forum: Motherboards
M
Floppy Problems

The screw idea was why I decided to take the cage out of the case. If I use any shorter of a screw, the drive doesn't stay in place. I do have a new idea that I want to try tonight... Since the case doesn't have a place for the actual face plate from the floppy to go, I took the face plate...
- MooShoe
- Post #7
- Jun 5, 2001
- Forum: Computer Building
M
Floppy Problems

Theories on why it's not the floppy itself... If I disconnect the drive and connect it to my other computer, it works fine. If I leave the drive in the drive cage, but take the drive cage out of the case itself, the floppy works fine. The only time I have problems getting the dumb drive to...
- MooShoe
- Post #5
- Jun 5, 2001
- Forum: Computer Building
M
Floppy Problems

This is with a new floppy. When I installed the new floppy about a month ago, it worked fine. Then, it went on the blink again. Yesterday, on a whim, I took the drive cage out of the case and tried it. Drive works flawlessly when the cage is not in the case. Mind you, the floppy is still...
- MooShoe
- Post #3
- Jun 5, 2001
- Forum: Computer Building
M
Floppy Problems

Hello all... I've posted about this a couple of times and have come to a new revelation... My floppy doesn't like to be installed in my case. Actually, I think the floppy is grounding out or something because when I have the drive cage installed in the case, the floppy don't want to work. If...
- MooShoe
- Thread
- Jun 5, 2001
- Replies: 6
- Forum: Computer Building
M
Having trouble networking my two computers, please help

Another thing you might think about doing is enabling netbuei on both machines. As an @Home subscriber, the computers are assigned their IP's through @Home. I'm going to guess that this is the same with your DSL connection. You will probably never be able to see the other computer in the...
- MooShoe
- Post #7
- Jun 2, 2001
- Forum: Computer Building
M
Help, let me hit that 1.5GHz mark!!!

Hmmm... I have the same set up as you and am comfortably sitting at 1504 (11x137) I've run mine at 11x140 for 1540, but I have a crappy HSF and the temps were a bit warm for me... Even now, I idle at about 45c. With an FOP38, I would think you wouldn't have any problems at all hitting 1500...
- MooShoe
- Post #9
- Jun 1, 2001
- Forum: CPUs and Overclocking
M
NEED SERIOUS HELP! - No Boot/No Post/No Beep/No Video!

Two thoughts... Maybe you've already tried this, but it can't hurt for me to mention these... First, try taking your mobo out of the case and see if it will boot up. If you can turn it on when it's not mounted in the case (which is probably what the RMA tech guy did), then you are definitely...
- MooShoe
- Post #10
- May 30, 2001
- Forum: Motherboards
M
trying to refresh Windows 2000 install

There is another option when booting from the CD. If you boot from the CD, instead of selecting the "Repair" option the first time, select install win2k, or whatever it is. On the next page, it will say something like it found an existing install of win2k and give you the option to...
- MooShoe
- Post #7
- May 23, 2001
- Forum: Operating Systems
M
Printer issue in Win2k

Hmmm... Well, I've gone into the printer's properties dialog and on the security tab, allowed everything to everyone. Still no printing by other users. There are certain people that I don't want to give admin rights to just because I know they'll end up messing something up on the box... I...
- MooShoe
- Post #3
- May 19, 2001
- Forum: Operating Systems
M
Printer issue in Win2k

Hello all. I have an interesting problem with my Win2k install. I have multiple users set up on my box so everyone in the house can have their own settings. What's wierd is when anyone other than myself logs onto the box, the printer doesn't work. I can tell my programs, say Word, to print...
- MooShoe
- Thread
- May 19, 2001
- Replies: 2
- Forum: Operating Systems
M
Power Supply for IWILL KA266-R

A big thing with the Iwill boards is the DDR DIMMs need to be pushed in really hard. Just because the retention clips click into place does not mean the DIMM has been seated properly. It is best to mount your CPU and memory with the mobo out of the case first. The first thing I'd suggest you...
- MooShoe
- Post #6
- May 14, 2001
- Forum: Computer Building
M
Floppy Problems

Curious issue with a floppy drive. After installing Win2k, the drive seems to have died. Before I loaded up Win2k, I was able to use the floppy drive. I know this because it came from an old system, plus, after I connected it to the new system, I was able to boot from a floppy with it. Now...
- MooShoe
- Thread
- May 10, 2001
- Replies: 2
- Forum: Computer Building
M
MSI K7T266PRO Issue

Hello all, I'm in the process of trying to get a new system up and running. It will be using an MSI K7T266Pro mb. I have 512 mb PC1600 Crucial Ram to go along with the 1.1 Ghz T-Bird. I'm trying to use the Western Digital 20Gb drive that came out of the old system so I won't lose any data...
- MooShoe
- Thread
- May 6, 2001
- Replies: 0
- Forum: Computer Building
M
Help! Diablo2 shuts down my computer running Win2000

Diablo 2 is very picky about CPU stability. I think it's because of poorly written code, but try less of an overclock. See how that treats you.
- MooShoe
- Post #2
- May 4, 2001
- Forum: Computer Building

RESOURCES

Top Bottom