Recent content by neddog

N
Replacement Board need A7N8X Bios Settings?

I appeciate the information, will just help me sort some things out.. Looks like you have your CPU unlocked? I also wonder about that Video Aperture setting of 128.. is that because your vid card has 128 of ram? is that what determines this setting? I am running my 2400 at 15 x 133...
- neddog
- Post #13
- Dec 9, 2002
- Forum: Motherboards
N
A7N8X Setup 2400 question

I had done it by removing the battery then shorting the jumper as the manual states. However I have sinced RMA'd the board abd have another, which seems to work NeDDoG
- neddog
- Post #20
- Dec 8, 2002
- Forum: Motherboards
N
Replacement Board need A7N8X Bios Settings?

I have the newest bios in the sytem and did with both MBs I have had..... Was the first thing i checked I believe it is 1001c NeDDoG
- neddog
- Post #8
- Dec 8, 2002
- Forum: Motherboards
N
Replacement Board need A7N8X Bios Settings?

Unfortunatly I found out about the Ram issue after i had acquired the parts from a out of town vendor.. When i went for a relacement Board I was going for an Epox and couldnt get one locally. As far as using PC2100 ram to access the bios, that is what I did, but eventually it flaked out. I also...
- neddog
- Post #5
- Dec 7, 2002
- Forum: Motherboards
N
Replacement Board need A7N8X Bios Settings?

I not sure what you are saying... but there is no additional information in the manual as i have read it or at least nothing i understand... and the CPU FREQUENCY setting includes clock speeds upto 200 in increments of one, in advanced, in Optimal I believe it had a selection of 100/133/166...
- neddog
- Post #3
- Dec 7, 2002
- Forum: Motherboards
N
Replacement Board need A7N8X Bios Settings?

Well I just got a new board from another supplier, what is real strange about this is that the board I had before was screwed, I phoned Vendor #2 to acquire a board and he refused to sell it to me given all the problems he said he has been having with them ( 4 out of 5 dead), according to him. I...
- neddog
- Thread
- Dec 7, 2002
- Replies: 12
- Forum: Motherboards
N
A7N8X Setup 2400 question

Ya i did that... even put in a 1900 trying to reset it... Nothing seemed to work. I tell ya I am real dissapointed and without a desktop at home now :( reseting the bios on the MB seems to have no effect, I am still getting "memory failed system test", or whatever it is. NeDDoG
- neddog
- Post #18
- Dec 5, 2002
- Forum: Motherboards
N
Identify This Proc?

Cool Thanks.... is this thing a thoroughbred A or B? NeDDoG
- neddog
- Post #3
- Dec 5, 2002
- Forum: CPUs and Overclocking
N
Identify This Proc?

There used to be s ite to identify Processors from AMD by their serial number.. I cant find the darned link and I even searched the Forums... I am tryin to identify this one AXDA2400KV3C AICUC0243TPDW Specifically to see which architecture or verion this is.... NeDDoG
- neddog
- Thread
- Dec 5, 2002
- Replies: 2
- Forum: CPUs and Overclocking
N
A7N8X Setup 2400 question

Well I officially think it is screwed.. I cannot get the cmos to clear, get it to post or anything now.... RMA Damn it NeDDoG
- neddog
- Post #16
- Dec 5, 2002
- Forum: Motherboards
N
A7N8X Setup 2400 question

Well now after messin with settings in the bios, I cant even boot the stupid thing.. I am getting (system failed memory test).. I was getting that before with the Corsair memory and the answer was to change to old 2100 ram and manually change the memory settings... Now I cant do anything.. I...
- neddog
- Post #15
- Dec 4, 2002
- Forum: Motherboards
N
A7N8X Setup 2400 question

I hate to say it but I have , (Read the Manual), or at least skimmed through it.. the only JUmper pertaining to FSB that I can see is beside the North Bridge and has two settings, Default 266-333 FSB support or 200 FSB, I have it on the 266/333 one... NeDDoG
- neddog
- Post #13
- Dec 4, 2002
- Forum: Motherboards
N
A7N8X Setup 2400 question

Does anybody here have this board with the same CPU? I would like to know what the settings are on under (Advanced Chipset).... and if your MB is detecting the chip properly NeDDoG
- neddog
- Post #11
- Dec 4, 2002
- Forum: Motherboards
N
A7N8X Setup 2400 question

Well I am stumped.. I am looking at the bios now and the top option (CPU External Frequency) says it is at 133.... I am totally baffled is that the right setting or am I missing something? NeDDoG
- neddog
- Post #10
- Dec 4, 2002
- Forum: Motherboards
N
A7N8X Setup 2400 question

No I am not positive as I am at work.. I will check when I get home.. What and where should it be set.. Just in the bios I think it is the top option under advanced chipset features??? That should be at 133? I dont have to change anything on the board itself do I? Thanks Neddog
- neddog
- Post #7
- Dec 4, 2002
- Forum: Motherboards

RESOURCES

Top Bottom