I just finished building an A8N-SLI System and had an IDE Hardrive issue. I started with a WD80g Sata drive on the black Sata1 Nvidea port on the MB and a Sony cd/rw on the secondary IDE channel to load WinXP,SP2 and all the drivers on the Sata drive with no problems. When I hooked up my WD...
If you look at the Monarch combo selections you will see that they only offer only PC3200 memory and Corsair PC3200xl is one of there selections. My question is why don't they offer any faster memory other than PC3200? I notice that others in this forum are building AMD64 systems with PC4000...
Well it's time again to build another computer and I have decided to put together a combo deal from Monarch. I have selected the A8N-SLI deluxe with a 3200+ and plan to OC to 3500+ speeds. The memory selections range from $188-$272 for a wide variety of 1Gig twin memory. Can anyone give any...
Six months ago I made a couple of data backup cd's with blank cd-rw cd's using 'Adaptec Direct Cd' software that came with my new
cd-r/w. Last week I installed 'NTI CD-Maker Pro' on my computer and when I inserted my back-up cd's I get a message that the cd needs formatting. What Give's ?? It...
I am running a WD 20 gig HD on the IDE 3 Raid channel. I have an old 80meg running on IDE1, a CD-R/RW (master)and CDRom (slave) on IDE2, and no, I'm not having any problems copying and burning with those drives on the same channel. <g>
I did have trouble getting the HighPoint bios to recognize...
I received my 800mhz T-Bird yesterday and I noticed the core has a green tint to it. I read somewhere on this forum that the difference between the Green and Blue cores is where they were manufacured and one was more overclocking friendly. Can someone refresh my memory ? Thanks
Well my KT-7a Raid/T-Bird came in today and the first thing I did was remove the heatsink to see if the L1 bridges were open which they were. I have spent the last few hours looking for some rear-window defogger paint to connect the L1 bridges and can't find any in this darn town. I guess I...
It could be several things causing your problem. First open the cover and make sure the take-up reel is turning, if it is then it could be the take-up reel sensor not sending pulse's to the micro. If the take-up reel is not turning.. then you will need an Idler assy. Also the 'end tape' sensors...
I ordered a case, cd-r rw, and modem 2 weeks before Christmas. They responded by e-mail and told me due to the Christmas rush my order would be delayed 3 working day's. I received my order in 5 working day's.
A week ago Friday I called them and asked about the availability of the Abit...
I'm building a new puter.. Last one I built was 3.5yrs ago ( P1@166 overclocked to 233 ) with no problems over the yrs. I'm now building a t-bird 800/kt7 MB with WD 20gig HD 7200rpm ATA/100 UDMA interface. My question is that the vendor I'm ordering the hardware from offers an special ATA66 H/D...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.