I have an ASUS T3 T3-P5945GC barebone system and just installed an Intel E5200 CPU. Unfortunately, the cpu appears to be running at 1.2 ghz according to CPU ID and I have already updated to the latest BIOS dated 6/2008. I believe this CPU was released after this BIOS so it's possible that this...
I have an ASUS T3 T3-P5945GC barebone system and just installed an Intel E5200 CPU. Unfortunately, the cpu appears to be running at 1.2 ghz according to CPU ID and I have already updated to the latest BIOS dated 6/2008. I believe this CPU was released after this BIOS so it's possible that this...
how about those ethernet over powerline adapters? Is that as good as a wire connection or just as flaky as wireless? I couldn't get my zycel combo to work due to some technical issue but there are other manufactures.
Aside from running a lan cable to my living room what solutions or specific products should I use to stream compressed 1080p HD Movies (like x264) to my living room? I need a solution that can stream hd movies to my htpc and supply internet/network connectivity to my other devices in the living...
I have 330ci with the Performance Package (ZHP) and got hit in the back by a lady with a Aston Martin DB9 (think it's an aston martin). Anyways, my rear bumber is ripped and needs to be replaced. Insurance Company of the lady (Farmers) called me and claims they can replace my bumber with an...
I bought some shards on 10/6/2005 and want to sell it asap. If I sell it today on 10/6/2006 will it already be considered long term capital gain for tax purposes or will i have to sell on 10/7 or later?
What board revision does everybody have? Not sure if multiple versions are out yet, but mine is version 1.0 (indicated on the pcb) and I got it from directron. So I know that I have the very first version.
Seems like I'm experiencing more issues than most ppl:
boot/ turn on problems at 400...
anyone else experience this problem with their ds3?
When I overclock the fsb to lets say 400 mhz, and then reboot or just turn off the pc and then turn it on, the computer will attemp to boot (fans turn on, but no display) and then turn off again. It will either do this for an indefinte time...
Shawn - How did you get ur Santa Cruz to work under Vista? I am assuming you are using latest xp drivers with some modifications?
I am about to go back to XP because I can't get my onboard sound (DFI Nforce 4 Ultra D) or Santa Cruz to work.
i lost my vista key too. Well i saved it in a file but then deleted it thinking that I wouldn't need it again. Now I want to re-install vista rc1 on my new computer and need my key again.
Does anyone remember how the key was delivered? Via email? (i searched through my inbox but can't find...
The 42A are just there for system growth. The PSU and case are usually the components I keep the longest. 2-3 years down the road, 40A + may become the standard.
The Silverstone 500w element and enhance 5150gh are on the top of my list too. It just seems like u get less withthe silverstone...
btw, the psu will be powering a conroe e6600 system that I hope to oc to 3.6+ with a single x1800 xt 512M card. Still haven't decided on the rest of the system (mobo, ram, etc...)
I'm about to pull the trigger on the NeoHE 550 because
- it can now be had for less than $100
- has 42A across 12v rails
- is near silent
- PFC
- modular cable
- fan at the rear may work better in an antec p180 case as oppose to a unit with bottom fan
However, the NeoHE seems to...
i placed an order but then cancel it because of the high failure rate mentioned by uses on newegg. Unless the latest batch of Ultra 5.1 have their quality issues worked out, i would only order them with some kind of extended warranty plan.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.