Recent content by paramdog

  1. P

    Prime Stable?

    Hello everyone, i just ran the In-Place Large FFT(max heat) prime 95 torture test on my system and my system lasted about 4 and half hours. Would u guys consider this stable computer to work on or shud i lower my overclocking settings. My overclock is as follows: 250 x 10 (2500MHz) DDR4000...
  2. P

    WD Raptor making unusual noise!

    antec NeoPower 480...click the link "MY RIG" to see all other system specs
  3. P

    WD Raptor making unusual noise!

    For some reason, after i keep my computer on for a while, the raptor starts to make HUGE unusual noises and gets REALLY loud. It is also acting a lil weird cause it stops spinning for split seconds...is it getting too hot in there or is this another defective piece :( (this is my 2nd from...
  4. P

    Temps vary on each restart?!

    Hi, i am using a 3500+ on my MSI Neo2 Platinum and each time i restart i have either one of 2 temps which is either 42 idle or 50 idle. And when i have the 50 idle i jus restart and its back to 42. Anyone know whats happeneing during the times its at 50 idle for no apparent reason? is it an...
  5. P

    Crucial Ballistix Problem

    u were rite, it was a failing hard disk, i put another IDE hard drive in and it works fine. So i RMA'ed my WD raptor...i think it broke when i droppd it :) lol
  6. P

    new rig not running up to par amd64 3500 MSI k8n neo2

    i have a 3500+ overclocked to 2415Mhz with Crucial Ballistix ram and nvidia 6800 and my 3dmark03 cpu score is only 1086 CPUMarks. my overall score is 9091 3dmarks. that definitely seems low for this fast processor and ram and vid card. anyone compare and see whats wrong?
  7. P

    *** Official K8N Neo2 PLat. Tread ***(S939)

    what is this new cpu vid in the new bios? i dont understand this new way of adjusting Vcore. someone have any idea?
  8. P

    Buy RAM speed you need with low latency or faster cheaper RAM and hope it has low latency?

    well its a tough question...but it all depends on the brand of the memory. for example the crucial ballistix memory works really well with amd64 939 becuase its made by micron chips and not the samsung chips. Buying this ram of pc3200 is def a better buy than some junk pc4000 or even a corsair...
  9. P

    Crucial Ballistix Problem

    Hi i have 2 512MB of PC4000 Crucial Ballistix ram and im having problems where there are times where programs just dont open. everything else works but no programs open then like 5 min later all those programs i clicked on show up. i have a feeling this is a memory problem anyone know why this...
  10. P

    3500+ Newcastle high temps?!

    how do u take off the heatsink, its stuck to my cpu and the cpu doesnt come off unless i take the heatsink off? do i jus pull the heatsink off the cpu even with the arctic silver on there in between the two? like do i have to completely take off ALL arctic silver and reapply like when i got the...
  11. P

    3500+ Newcastle high temps?!

    i think i mighta put too much arctic silver or incorrectly, is there a way i can correct this? without ruining my setup lol
  12. P

    3500+ Newcastle high temps?!

    Hey, i just built my new system with the following specs: AMD Athlon 64 3500+ (230 x 10.5=2415Mhz) Zalman CNPS7000A-CU MSI K8N Neo2 Platinum 128MB eVGA Nvidia 6800(overclocked to 416Mhz core/815Mhz memory) 1 GIG Crucial Ballistix PC4000(running at DDR460 2.5-2-2-6) 1 74GB WD Raptor SATA...
  13. P

    Post your 3DMARK05 SCORES.

    3DMark2005 Score: 3303 CPU Score: 5109 AMD Athlon 64 3500+ (running at 230 x 10.5 = 2415GHz) MSI K8N Neo2 Platinum 128MB eVGA Nvidia 6800 WD 74GB Raptor SATA 10,000RPM Zalman CNPS7000A-Cu 1 GB Crucial Ballistix PC4000(running at DDR460 2.5-2-2-6) Antec NeoPower 480 Thermaltake...
  14. P

    Got a processor shipped to me today..

    i wud try to get that RMA'ed and get another one, who knows what else happened to that.
  15. P

    ZALMAN CNPS7000A-AlCu will it work on 939chip?

    i didnt even let it heat up...i just pushed on the two holes on the front side and it popped right out the back, it wasnt stuck that well, just enough to stay and enough to pop out easily. it took me like 5 min to figure out that it WAS indeed able to be taken out. at first i thought it was jus...
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |