You should be OK if you have good case flow. Touch the chip on the back of the card. If it is warm to very warm you are golden. If it burns after about five seconds then add a case fan to blow some air over it. The 9100's were not high heat producers.
These are great programs. Just a note; after you have run SpyBot SD and cleared out the junk you want kept out; be sure and immunize to keep these types of infestations out for good.
There is no 9.1. The DX9 SDK is for 24 bit precision, which is why the ATI cards are able to run the coded paths directly without resorting to 12 and 16 calls as NVidia does. ATI does not have any lower quality in IQ or speed in relation to the NVidia cards.
This could of course change in a...
After 2 years any TIM is going to start to crack even AS. Since you have cleaned the Sink; now take off the Sink and clean the bottom of it and your CPU and replace with something like Ceramique.
I have a 9800Pro in a Biostar IDEQ. It has a 200Watt PSU and the card is stable at 450/386. It is not stable with the side doors on,however. Overheating is an issue with this card; a 9500Pro had no heating issues. The PSU's that are put in these boxes seem to be quality products but the boxes...
I would just try and go with the retail sink. It has a patch of Shin Etsu on as a TIM. The retail sink is actually very good. Overclocking is very easy with an NF2 chip on board. Just increase the FSB in the bios and stay with the default VCore and see how high the chip will go.
Most people...
I agree; I still use a russian 21/4 by 21/4 camera and it has excellent optics. Though small there is nothing light about the steel used in this camera.
Are you saying that your laptop has a separate Intel Graphics chip and not an integrated one. I would be very suprised to find out you laptop had anything other than an integrated graphics card.
Laptops are not desktop computers. If you cannot wait 2 weeks then perhaps someone in your area...
Rage tweak looks in the registry for the Card. Since it cannot find it is is not there. Sounds like you have another binary in there; perhaps from an old card. Try and delete the cards drivers then restart in VGA mode. Now run Driver cleaner and then run Cab cleaner to get rid of any mis...
I just benched my 9500 128 NP and not modded. I was at 100% the 4400 was at 104% the 4200 at 86% and the 9700 Pro was at 74%.
Really impressively accurate results. I also tried it with and without and OC and nothing changed except the results came up immediatley. Since it is a Mad Onion mark...
I have the TTGI 520; Have had it for 15 months and used in on 4 boards. Voltages are strong and very stable. Adjustable 5 and 12Volt pot inside the back. Very happy with it. Very popular on XStreme systems forum where it was given a large buy.
If you are going to overclock this is an excellent...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.