I have two SATA 500 GB hard drives in Raid 0 and I'm running Windows XP. I want to resize my single 1 TB partition into an 800 GB partition and a small partition for the remaining space that I'm going to use to test out Vista. What software can I use to do the partition resize? I looked at...
So I just got the Acer 22" al2216w monitor today. The colors are a little washed out and I read that you need to go through and change the color settings around. Just wondering if anyone else has gone through that and found some good settings. If so, can you share those with me? Thanks.
This may be a dumb question, but where is Page 92? I only see 47 pages of posts here. I'm also using the Tuniq Tower 120 cooler, which is keeping my system nice and cool so I definitely have room to lower the fan speed. Thanks.
Thanks Core2 for welcoming me here. Here's what I did for the OC:
Using the default 9x multiplier.
Had to manually set the RAM timings to 4-4-4-15 with 2.0v (I'm running memory Unlinked).
Increased vcore to 1.475 and vmch to 1.563.
I then changed FSB to 1400 (3.15 Ghz) and ran...
Just got my Asus P5N-E motherboard with an C2D E4300, Tuniq Tower 120, and OCZ DDR2 800 RAM. I was able to OC it to 3.2 Ghz. I realize that I could probably go a little higher, but I am pretty happy with the current speed.
The next thing I need to do is to adjust the fan speeds since it's a...
Just got my system this week and I have it overclocked to 3.2 Ghz stable. This is with the vcore at 1.45v and vmch at 1.563v. CPU temps are 34C idle and 46C under load. Overall, I'm pretty happy with the results.
I also tried 3.35 Ghz also, but got Orthos errors so just backed it down to...
I just got the same board and I"m looking for help also. The only things I've read are to turn off C1E and SpeedStep off, and turn off any PCI-E linkboost as it is actually slower. I got this from the C2D OC thread at http://forums.anandtech.com/messageview.aspx?catid=28&threadid=1947261
It's been a few years since I put together a new PC so it was a bit of adventure last night getting everything together. The main specs on it are C2D 4300, Asus P5N-E SLI, OCZ DDR2 800 RAM, Tuniq Tower 120. The Tuniq Tower 120 heatsink is huge, but it's keeping my system nice and cool...
I'm buying a C2D E4300 with an Asus P5N-E motherboard and 2 GB of DDR2 800 RAM. I know that the DDR2 speed is higher than is needed by the E4300, but I found it to be about the same price as the DDR2 667 RAM. I'm planning on overclocking the E4300 to around 350 Mhz clock speed, which should...
Are either of these good RAM to use on a Gigabyte S3 with C2D 4300? Any votes for one over the other? I believe they are both D9.
http://www.newegg.com/product/product.asp?item=N82E16820220174
http://www.newegg.com/product/product.asp?item=N82E16820150054
So if I switched to the E6400, what kinda of speeds would I be able to get with it overclocked and would an E6300 give a similar performance? I'm guessing I will need a CPU cooler then, any suggestions? Thanks.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.