THey at least have a board to post. Others do not. That does say a lot about customer sevice. Given that you are rarely going to get someone bothering to write a post that says how great everything went and how it works, the fact ehya have a board where most people either complain or ask for...
Does your system still boot? If so try to create the BIOS boot disc as specifed and run the batch file. This should do it. If not BIOS migh be corrupted. You might get it back by resetting CMOS but no guarantees. As for sound worry about the BIOS first. Once it is fixed you should be able to...
I don't know your level of expierence with putting computers together, so this maybe a little basic.
1. Make sure yhat the MOBO is mounted in case properly and securly. Use only the holes referenced in the manual. If you are using an case from an older machine rmake sure there are no standoffs...
If the problem with Prescott support is a voltage level, seems to me a BIOS fix will take care of that. Unless they repinned voltages or something like that. Intel has advertised for quite awhile that the Prescott initial releases will use teh 478 socket. So I think it can be made to work. The...
No flames just a basic fact that at this time we are living in a Golden Age where INTEL is repackaging a lot of 875 chipsets and selling them as 865's. So if you manage to get one of those then I can see no reason to buy and IC-7G (although I own one) over the IS-7G. However this will not last...
I just discovered a little gain for those who are using some of the later BIOS revisions. On the advanced Chipset page in BIOS (where you set the memory timings) I changed the read delay adjust from "Auto" to enabled. It increases Sandra numbers about 30 points memory bandwidth. Setting the...
Just passing on what the ABIT board said. They claim that the equation/algorithm supplied is from the vendor and is correct so if others are reading the same junction and coming up with a different number then perhaps something may need correcting. However isn't it the WINBOND chip that does the...
According to the ABIT webpage, ABIT is measuring inside the CPU, a thermal diode. It ia not a thermistor tpaed or otherwise attached to the case as in some MOBOs. They claim it is accurate and that the INTEL limit for this measurement is well over 100 degrees C. There claim is hard to prove...
2003/05/14
Does ABIT IC7 series boards support booting up the system from USB devices? (IC7 / IC7-G )
ABIT IC7 series boards could boot up the system from USB FDD, USB ZIP, USB CDROM, and USB HDD. The settings could be found in "Advanced BIOS Features" page. To boot system...
ABIT IC-7 board supports this I think check with the ABIT webpage. This was a FAQ. I don't think your initial load can come from USB but after that, you can select it.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.