I've purchased several Shutte SK41G xpc's to sell around town. I've been building them with a Duron 1.3 ghz processor with FSB of 200mhz. On 2 of these machines, the plastic arm on the socket has weakend to the point where the CPU doesnt lock in correctly. This cause these machines not to boot...
The mobo on my SK41G is dead. Its very difficult to find any FX41 mobos out there and was wondering if the FN45 mobo will fit in the SK41G case. The dimensions on both the SK41G and SN45G are identical except for the back plate.
Anyone know?
Thanks
SHagg
I've purchased several Shutte SK41G xpc's to sell around town. I've been building them with a Duron 1.3 ghz processor with FSB of 200mhz. On 2 of these machines, the plastic arm on the socket has weakend to the point where the CPU doesnt lock in correctly. This cause these machines not to boot...
I've purchased several Shutte SK41G xpc's to sell around town. I've been building them with a Duron 1.3 ghz processor with FSB of 200mhz. On 2 of these machines, the plastic arm on the socket has weakend to the point where the CPU doesnt lock in correctly. This cause these machines not to boot...
In response to Dewey who said they should just release it and then release incremental patches afterwards. I have to agree with that statement. ALL games released, wether the developer claims they're finished or not, require some type of patch afterwards. Aren't we the financial force behind all...
Ok guys, I finally solved it. After doing system restore countless of times and reinstalling ALL available catalyst drivers, I did the one thing that got me going. I inserted the win xp cd and rebooted. After the standard blue screen installation screen, I chose to repair my existing...
I currently installed catalyst 3.8 for my radeon 9600 pro. it shows as unknown instead of display adapter in device manager. Is this normal?
shagg
win xp pro
epox 8rda+
athlon 2800xp
768 ram
Regarding this video card. How far has anyone been able to overclock its core and memory by?
Currently default core is 325mhz and memory is at 650mhz. Any input will be appreciated.
Shagg
Wondering if anyone has used the Blitzz brand pci wireless cards with linksys wireless befw11s4.
I find that the computer isnt receiving an ip address from DHCP services on the router. I had to manually configure it to work. The signal strenght and quality are both 95-100 %. I've disabled all...
I have a geforce3 ti200 who's fan has stopped working. The fan sits on top of a heat sink. I never overclock my video cards. Should I go and buy a new fan for it or would it be ok with just the heat sink over the gpu?
thanks
shagg
Ive been looking for a software monitor for this board since the one that came with the cd crashes. Is there a good alternative software solution for this? possibly freeware.
Thanks
shagg
my rig
win xp-pro
epox 8rda+
athlon xp1900
512 ddr 2700
80 gig hd
sblive
ati 9700
I'm trying to find a small sized work bench so I can begin fixing and building pc's from home. Anyone know where I can shop for one? All the ones I've seen are more for industrial work than anything else. I need help since my wife is bugging me about the scratches I left on the dining room table...
After reading the tech documents on AMD's website, I noticed that they listed the nominal voltage on an XP 1900 at 1.5v. On my system, its set to 1.8. Should I be lowering it to 1.5? I don't overclock my cpu's and would like to extend the life of the cpu as much as possible.
\Thanks
shagg
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.