Hi NFS4
Been awhile sense I been here to get in your crawl :). You must have a bad system to be running hot with an Intel,what you need is a aircondition room lol.
My system runs at 86 F at idle ( room temp 73 f ) and under load 108 F,with the 7000 zalman.So I don't thx you have every thing...
I just got two new sticks of 256megs 1066 memory, I have 4 128 meg sticks installed on my board.
My question is the placement of the two new 256 meg stick to replace 2 of the 128 meg sticks.
My ASUS manual dosen't show any other config beside 4 128 megs or two sticks of 128 with 2 dummie...
I had the same thing happen to me and ,I explained in another post on how to remove the cpu from the heatsink,that new stuff is very hard after use,and when I took mine off to put on the Zalman it pulled the CPU right out of the socket.and I didn't pull that hard either.I suggest running the...
Hell by the time the system address all that memory you be going to bed lol.Are you into nuke programs or something :).Hell I wouldn,t,put that much ram in mine if it was free-bee stuff.
Hell I wouldn't take second hand stuff,I would send it to me so I can give it to a person that really needed it,that dosen't want no one to envy them :).
On the copper heat sink with the compound they use now,taken the heat sink off is a pretty tricky thing because the new paste gets hard after afew weeks of use and when it,s cold.I would run the system afew min so maybe the paste will get softer and kindly tiwst the heatsink very gently a little...
Next time you order a new product,I suggest you read instruction befor installing,the idear is to get the paste over the cpu and putting it on the heatsink you guessing where center is,next to take off the heat sink you will see where the cpu was attached because the heat will make a shadow on...
USE DXDiag.EXE and look under the help tab and override the refreshrate by typeing in what ever refresh you monitor supports or what ever you want.I use to use a refresh fix,but why use a program that you all ready have in windows.
OK guys Here is the Refresh Fix and not haft to use the NVfix 2.1.Well works for me any way.I was barking up the wrong tree,I hit my head on the desk,and it came back to me.It is not in Windows display settings fix;It is in the DXDiag.exe program and open DXdiag,and go to HELP TAB and in the...
Here is my problem,I locked the refresh rate in the displays properties in the past to 85refresh rate,But I forgot the path to do it again (been awhile) with out haven to use the NV-refresh fix 2.1 program.Can someone tell me what is the setting I,m over looking in the advance display...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.